HYTRONIK HBIR36 PIR Standalone Motion Sensor Instruction Manual
- June 4, 2024
- HYTRONIK
Table of Contents
HYTRONIK HBIR36 PIR Standalone Motion Sensor
Technical Specifications
| Operation frequency | 2.4 GHz – 2.483 GHz |
|---|---|
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol | 5.0 SIG Mesh |
| Operating voltage | 230VAC 50Hz |
| Stand-by power | <1W |
Load ratings
| 2x100VA (Capacitive)
2x150W (Resistive)
Sensor principle| PIR detection
Detection range (Max.)*
HBIR36
| Installation Height : 6m
Detection Range (Ø) :9m
Detection range (Max.)*
HBIR36/R
| Installation Height : 6m
Detection Range(Ø) :10m
Detection range (Max.)* HBIR36/H| Installation height：15m (forklift)
12m (person) Detection range (Ø)：24m
Detection range (Max.)* HBIR36/RH| Installation height：20m (forklift)
12m (person) Detection range (Ø)：40m
Detection angle| 360O
Operation temperature| Ta:-20OC~+45OC
IP rating| IP20
EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)
| EN60669-1, EN60669-2-1
AS/NZS60669-1/-2-1
RED| EN300328, EN301489-1/-17
Certification| CB, CE , EMC, RED, RCM
Download the App
Free App for set-up and commissioning
Installation
Mechanical Structure & Dimensions
- Ceiling (drill hole φ66~68mm)
- Carefully prise off the cable clamps.
- Make connections to the pluggable terminal blocks.
- Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
- Fit detection blind (if required) and desired lens.
- Clip fascia to body.
- Bend back springs and insert into ceiling.
Wire Preparation
Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.
Wiring Diagram
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on Koolmesh app.
Switch Function
|
Action
|
Descriptions
---|---|---
Push switch
| Short press (<1 second)
- Short press has to be longer than 0.1s, or it will be invalid.
| – Turn on/off – Recall a scene
– Turn on only – Exit manual mode
– Turn off only – Do nothing
Double push
| – Turn on only – Exit manual mode
– Turn off only – Do nothing
– Recall a scene
Long press (≥1 second)
| – Dimming
– Colour tuning
– Do nothing
Simulate sensor
|
/
| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Detection Pattern & Optional Accessories
