concept OPP1060 Under Cabinet Range Hood User Guide

: June 10, 2024
: concept

Table of Contents

ACKNOWLEDGEMENT
IMPORTANT SAFETY INFORMATION
PRODUCT DESCRIPTION
CONTROL PANEL DESCRIPTION
CLEANING AND MAINTENANCE
INSTALLATION OF THE APPLIANCE
DIMENSIONS
TROUBLESHOOTING
SERVICE
ENVIRONMENTAL PROTECTION
Documents / Resources

Under cabinet range hood concept OPP1060 Under Cabinet Range
Hood OPP1060

ACKNOWLEDGEMENT

Thank you for purchasing the Concept product. We want you to be satisfied with everything we make every day you use it.
Please read the instructions carefully before initial use. You should retain them for future reference. Ensure that anyone using this product is familiar with the instructions.

TECHNICAL SPECIFICATIONS

The manufacturer reserves the right to make potential technical changes, typographical errors and any differences in the representation without prior notice.

IMPORTANT SAFETY INFORMATION

Upon delivery of fume hood

Immediately after delivery, check the package for any damage during shipping.
Caution! Caution! Some edges of this appliance that are hidden after installation are sharp! Be careful not to get cut when handling an uninstalled unit.
Do not install the appliance if it has been damaged. Contact the store where you purchased it immediately.
Remove all the packaging and marketing materials before first use.
Keep the packaging materials away from children or dispose of them properly.

During installation

Do not use the appliance in any other way than as described in this manual.
Only use it as a household appliance and for removal of fumes arising from cooking of food or for recirculation and absorption of smells arising from cooking of food.
This appliance can be used in households and similar places like:
– Kitchen cabinets in shops, offices and other workplaces.
– Appliances used in agriculture.
– Appliances used by guests in hotels and other areas in a hotel environment.
– Appliances used in a Bed and Breakfast environment.
Do not touch the appliance with wet hands.
Do not allow children or unauthorized people to handle the appliance, use it out of their reach.
Children should not play with the appliance.
Pay extra attention if the appliance is used near children.
Do not allow the appliance to be used as a toy.
This appliance can be used by children aged 8 years and over. Persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, should be supervised or familiarized with the instructions for use of the appliance in a safe way and have been made aware of the risks involved.
If a malfunction occurs, turn off the appliance and unplug it from the wall outlet.
When disconnecting the unit from the wall outlet, never pull the power cord, grasp the plug end and disconnect it by removing it from the receptacle.
Do not immerse the power cord or the plug in water or any other liquid.
Check the appliance and the power cord for damage regularly.
Do not switch on the appliance if it has been damaged.
Unless the appliance is in operation, ensure that all its controls are switched off.
Do not manipulate with an open flame (e.g. singeing) under the appliance. If you remove a cooking vessel from a gas burner, reduce its flame to minimum or turn it off!
Caution! Risk of fire! Care must be taken to ensure that the diameter of the gas burners on the gas cooker or the cooking plate corresponds to that of cooking utensils used. If cooking vessels with a diameter lower than recommended are used, the flame could start to burn around the cooking vessel resulting in a risk of melting plastic handles.
While deep frying or frying of food, observe this food all the time. In the case of oil overheating, there is a risk of fire!
Ensure that the flames do not get too close to the appliance.
Observe intervals for replacement and cleaning of filters (at least every 2-3 months). Failure to observe these requirements results in a risk of fire due to fat accumulating in the filters!
All the respective current standards and official regulations must be observed relating to the removal of the extracted air.
A ventilation duct diameter for the removal of the extracted air should be approximately the same or larger than that of the hood’s flexible outlet duct.
Extracted air should not be led to a chimney intended for discharge of flue gases and combustion products or a shaft serving for ventilation of rooms where fireplaces are situated.
When the appliance and fireplaces are in operation simultaneously, vacuum in the room should not be higher than 4 Pa (0.04 mbar).
Do not use any accessories other than those recommended by the manufacturer.
Do not use accessories with damaged surface treatment or if it has been worn out or has other defects.
Do not use any corrosive cleaning agent for cleaning. Maintenance and cleaning on a regular basis extend the lifetime of the appliance.
Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.

Possible defects

Only qualified service technicians should repair or perform maintenance to this appliance.
During the repairs the appliance must be disconnected from the power. Switch off the circuit breaker or remove the plug from the wall outlet.
When disconnecting the unit from the wall outlet, never pull the power cord, grasp the plug end and disconnect it by removing it from the receptacle.
If the power cord is damaged, contact the authorised service centre.

If you fail to follow these instructions, any possible repair cannot be recognized as a warranty repair.

PRODUCT DESCRIPTION

The body of the device
Control panel
Upper opening
Backﬂow valve

CONTROL PANEL DESCRIPTION

Switch for setting the fan power level
Light switch

Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons.
Ventilation mode
The extracted air is discharged through the flexible outlet duct to the ventilation shaft out of the room. If the appliance is equipped with a carbon filter, remove it (see chapter Cleaning and Maintenance).

Select the required fan power (1 – 3) with the switch for setting the fan power level (1).
After use, switch off the appliance by setting the switch for setting the fan power level (1) to the “0” (off) position.

Recirculation mode
If you do not have the option to remove the fumes from the room, you can select the recirculation mode. In this mode, the extracted vapors are filtered through a grease filter and a carbon filter. The activated carbon in this filter absorbs odors and the cleaned air flows back into the room. For this mode, it is necessary to purchase and install a suitable carbon filter (see paragraph Cleaning and maintenance), plug the outlet and switch the air outlet flap (see paragraph Installing the appliance).

Select the required fan power (1 – 3) with the switch for setting the fan power level (1).
After use, switch off the appliance by setting the switch for setting the fan power level (1) to the “0” (off) position.

Note:
When the recirculation mode is used (carbon filter installed), the extracted air output can drop.
Turning the lights on/off
Use the switch (2) to switch the lighting on or off

CLEANING AND MAINTENANCE

Before maintenance and cleaning, unplug the power cord from the electrical outlet or turn off the circuit breaker of the appliance ‘s electrical outlet.
Do not immerse the power cord, plug or appliance in water or any other liquid.
Set all controls to the off position.
Clean the outer surface of the appliance with a damp cloth or use a neutral detergent.
Do not use scouring pads, abrasive sponges, abrasives, solvents or aggressive cleaning agents.
Do not use a steam cleaner to clean the appliance.

Cleaning and replacement of filters
Textile grease filter

This filter cannot be washed or otherwise cleaned.
During normal use of the appliance, the textile grease filter should be replaced every 2-3 months. Shorten this interval if you fry or fry more often.
Do not use the appliance without the textile grease filter properly fitted!’

Remove the lower metal cover of the appliance by sliding the plastic catches (Fig. 1).
Loosen the wire holder ﬁltr and discard the used textile grease ﬁltr.
Fit a new textile grease filter and secure it with the wire holder (Fig. 2).
Attach the bottom metal cover of the appliance in the reverse order.

Carbon filter (to be purchased)

This filter is only used in recirculation mode.
The filter contains activated carbon, which absorbs odors. After some time, the activated carbon saturates and loses its absorption function.
This filter cannot be washed or otherwise cleaned. During normal use of the appliance, the carbon filter should be replaced every 2 months. Shorten this interval if you fry or fry more often.

1. Remove the lower metal cover of the appliance by sliding the plastic catches (Fig. 1).
2. Loosen the wire filter holder and discard the used carbon filter.
3. Install a new carbon filter and secure it with the wire filter holder.
4. In the engine compartment, “flip” the lever to recirculation mode (Fig. 3).
5. Proceed in the opposite way to replace the carbon filter. concept OPP1060
Under Cabinet Range Hood - Light switch 3

INSTALLATION OF THE APPLIANCE

The appliance should be connected by a qualified professional!

The buyer, not the manufacturer, is responsible for installing the appliance. Defects caused by incorrect installation are not covered by the warranty.
Remove all packaging and marketing materials from the appliance before first use.
We recommend entrusting the installation to a specialist company.
The manufacturer accepts no liability for damage to persons, animals or property due to incorrect installation.

Follow the procedure below to install the appliance:

Remove all packaging and marketing materials from the appliance before first use.
Mark the minimum required mounting height (650 mm for electric and 750 mm for gas hobs) on the wall behind the hob or hob.
Mark the center of the hob (stove) with a vertical line.
Drill the holes and fasten the hood according to Fig. 4 into the upper box, or according to Fig. 5 to the wall.
Make sure that the hood is in a horizontal position to prevent the accumulation of grease (grease) on one side (Fig. 6).
After hanging the hood, attach the flexible outlet pipe to the outlet. Insert the other part of the flexible pipe into the prepared hole in the wall.
Plug the power cord into an electrical outlet.

concept OPP1060 Under Cabinet Range Hood - Light switch
4 Electrical connection:

Check that the connected voltage and current fuse correspond to the values on the type plate of the appliance.
Use only grounded electrical outlets.
Do not use power strips, connectors, or extension cords.
The plug of the appliance’s power cable must be freely accessible even after installation.
Connection changes may only be performed by a qualified professional.
The electrical safety of the appliance can only be guaranteed if the protective terminal of the appliance is connected to the protective conductor of the mains.
The manufacturer is not liable for damage to persons or property due to missing or incorrect protective connection.

Disassembling
If you disassemble the appliance, it is important to follow the steps in the correct order:

First, unplug the power cord from the mains (pull the plug out or switch off the circuit breaker).
Subsequently disassemble individual parts of the hood in reverse order of the appliance installation.

DIMENSIONS

concept OPP1060 Under Cabinet Range Hood - Light switch
5

TROUBLESHOOTING

Defect description	Possible cause	Solution
Lamps illuminate but the motor stands idle	The motor blades are blocked.

Contact the service centre.
The motor or its essential parts are damaged.| Contact the service centre.
The plug inserted incorrectly or insufficiently in the wall outlet.| Check connection of the plug.
The wall outlet is not energized.| Check that the wall outlet is energized, e.g. by connecting another appliance.
Lamps do not illuminate and the motor stands idle| The plug inserted incorrectly or insufficiently in the wall outlet.| Check connection of the plug.
The wall outlet is not energized.| Check that the wall outlet is energized, e.g. by connecting another appliance.
Fat drops from the metal fat filters| Heavily fouled filters. Risk of fire!| Immediately clean or replace the metal fat filters.
The appliance vibrates when it is on| The motor blades are damaged.| Contact the service centre.
The motor is not fixed fast.| Contact the service centre or fix the motor fast.
The hood is not fixed fast.| Fix the hood fast.
Insufficient exhaust of the extracted air| Distance between the hood and the cooking plate is too long.| Reduce distance between the hood and the cooking plate.
Strong draught, too many doors or windows opened.| Close some doors or windows.
The motor stopped working| The thermal overload protection against the motor overheating triggered.| Improve the room ventilation, open doors or windows or check distance between the hood and the cooking plate. If required, increase distance between the hood and the cooking plate.
The hood is not levelled| The hood is not levelled or the bracket screws are not tightened properly.| Check the hood for being levelled or tighten holding screws and level the hood.

SERVICE

Changing the bulb
Allow the bulb to cool before replacing. Danger of burns!
To replace, proceed as follows:

Disconnect the power cord from the power outlet or turn off the circuit breaker of the appliance ‘s electrical outlet.
Remove the cover glass and replace the bulb with a new one of the same type (max. 40 W)!
Reattach the cover glass.

Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by a qualified specialist or the service centre.

ENVIRONMENTAL PROTECTION

Prefer recycling of packaging materials and old appliances.
Packaging materials may be disposed of as sorted waste.
Dispose the plastic bags made of polyethylene (PE) of as sorted waste.

Recycling of the appliance at the end of its lifespan:
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The symbol on the product or its packaging indicates that this product may not be treated as household waste. It is necessary to take it to a container park for the recycling of electrical and electronic equipment. By ensuring the correct disposal of this appliance you will help prevent potential negative consequences to the environment nd human health, which could otherwise result from inappropriate disposal of this product. Disposal must be performed in accordance to the regulations for waste disposal. For more detailed information about recycling of this appliance see the authorized local office or service for household waste disposal or the shop, where you purchased the appliance.

2021/12/1

Documents / Resources

| concept OPP1060 Under Cabinet Range Hood [pdf] User Guide
OPP1060, OPP1060, OPP1060, OPP1060 Under Cabinet Range Hood, Under Cabinet Range Hood, Cabinet Range Hood, Range Hood
---|---