feelworld DH156 15.6 Inch Portable Monitor User Manual

: June 5, 2024
: FEELWORLD

Table of Contents

Foreword
Product Structure and Instruction
Ports Connection
Supported Phone Model
Button Shortcut Operation Instructions (OSD w/o display)
Menu Operation Instructions
Menu Function Instructions
Product Parameters
Q & A
Read User Manual Online (PDF format)
Download This Manual (PDF format)

15.6” PORTABLE MONITOR
Full Function TYPE-C

USER MANUAL

Foreword

Thank you for purchasing our 15.6-inch portable monitor. Please read this manual carefully before using the unit. Have a great experience!

Caution

Do not use a damaged or loose plug.This may cause an electric shock or fire.
Do not pull the plug out by the wire or touch the plug with wet hands. This may cause an electric shock or fire.
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. Failure to do so may cause an electric shock or fire.
Put your monitor in a location with low humidity and a minimum of dust. An electric shock or fire could result inside the monitor.
Do not drop the monitor when moving it.This may cause damage to the product or human body.
When cleaning the monitor case or the surface of the IPS screen, wipe with a slightly moistened, soft fabric.
If your monitor does not operate normally – in particular,if there are any unusual sounds or smells coming from it – unplug it immediately and contact after sales or the professional technical staff.
For each hour of looking at the monitor, you should let your eyes rest for 5 minutes.This will reduce eye fatigue.

Key Feature

1920×1080 HD IPS , 250cd/㎡
Slim design and lightweight, easy to carry on-the-go
OSD button operation, simple and intuitive
Full function of Type-C1 and Type-C2 ports for power supply, display
Widely compatible with Smart Phone, PC, Mac Book, Switch, etc.
Type-C 3 port can connect to keyboard or mouse to the monitor.
Plug and play. No additional installation or software necessary.
Built-in dual stereo speakers

Product Structure and Instruction

Number	Function Instruction	Number	Function Instruction
①	3.5mm audio input	⑧	EXIT Return/exit the menu; Input Source(OSD w/o

Ports Connection

Note: Phone for IOS system, MAC notebooks (without HDMI interface) need to use adapter devices, such as Lightning to HDMI cable

Supported Phone Model

HUAWEI| Mate10, Mate10 Pro, Mate20, Mate20 Pro, Mate20 X, Mate30, Mate30 Pro, P20, P20 Pro, P30, P30 Pro, P40, P40 Pro
---|---
HONOR| Honor Note10, V20
SUMSUNG| S8, S8+, S9, S9+, S10e, S10, S10+, S20, S20+, Note8, Note9, Note10, Note10+, A90 5G, Galaxy Fold, Galaxy Fold2 5G, Tab S4, Tab S5e, Tab S6
RAZER| Razer Phone, Razer Phone2
LG| G5
OPPO| R17 PRO
ASUS| ROG Phone
HTC| U Ultra
SMARTISAN| R1, Pro2S

Tips: the smartphone can be compatible which equipped with USB-C port and supports DP output function , not limited to the listed models.

USB-C one cord connection
Connect laptop (the device should USB 3.1 Type C DP ALT-MODE) with the monitor via USB-C cable can achieve power supply and display.

Button Shortcut Operation Instructions (OSD w/o display)

Press > key to bring up the backlight adjustment item, press the ＜/ ＞ key to adjust the analog value, after the adjustment, press EXIT key to exit.

Press < key to bring up the volume adjustment item, press the ＜/ ＞ key to adjust the analog value, after the adjustment, press EXIT key to exit.

Press EXIT key to bring up the Input , press the＜/＞ key to select the signal input, press Exit key to exit

Use the USB-A to USB-C cable to connect the monitor to the power supply. After the power is turned on, the indicator light turns red，the indicator lights up green after connected the signal.
Press the MENU key to enter the menu bar, use the ＜ or ＞ key to select the menu item, and press the MENU key confirm to enter the secondary menu.
After entering the secondary menu, use the ＜ or ＞ key to select the adjustment item. Press the MENU key to confirm and enter the adjustment item, use the ＜ or ＞ key to adjust the parameter value. After adjustment, press the EXIT key to return to the previous menu, and then enter the next step of selection and adjustment.

Note: The menu can only be operated when a signal is connected.
Only connect power without connect signal, the monitor will enter standby status after turning on about 5S.

Backlight| 0 ～ 100
Adjust the screen brightness
---|---
Brightness| 0 ～ 100
Adjust the image brightness
Contrast| 0 ～ 100
Adjustment of the ratio between the brightest and darkest parts of the image . When adjusting, pay attention to the sense of hierarchy in the image. If the proportion is too large or too small, it can cause the image to lose its colorful appearance.
Sharpness| 0 ～ 4
Adjusting the clarity and detail expression of image edges

Temperature| 9300, 7500, 6500, 5800, sRGB, User
Under the User , the Red , Green and Blue of the image can be adjusted.
Red (0 ～ 255), Green (0 ～ 255), Blue (0 ～ 255)
(Use the ＜ / ＞ key to select the User, and then press the MENU key to enter the User.)
---|---
Color Effect| Standard, Game, Movie, Photo
Selecting the color effect of image
HUE| 0 ～ 100
To adjust the image cool and warm tint
Saturation| **** 0～100
Adjustment of color concentration

Aspect Ratio| Full, 16:9, 4:3
Adjust the image aspect ratio
---|---
Over Drive| ON , OFF , OD Gain 0 ～ 100
This function is mainly used for laptops and computers. Default OFF, after enabled, response speed can be adjusted through OD Gain
DCR| ON , OFF
After enabled, adjust the contrast automatically

Input| Auto Select, D1: TYPE C , D2: TYPE C, D3: HDMI
Remark: factory default to Auto Select
---|---

Volume| 0 ～ 100
Adjusting the volume of speaker
---|---
Mute| ON , OFF

Language	English,
Menu Time	10 ～ **60s

Adjust the display time of the menu on the screen
OSD Transparency| 0 ～ 255
Adjust the transparency of the menu picture background on the screen
Reset| Press the MENU** button to reset, it will restore the factory default parameter settings.

Information| View the corresponding screen input source information. (Press the MENU key to enter the Information menu to view.)
---|---

Product Parameters

Panel Size	15.6”
Whether Touch	NO
Display Colors	16.7M (8bit)
Resolution	1920×1080 pixels
Aspect Ratio	16:9
Pixel Pitch	0.17925 (H) X 0.17925 (V) mm
Brightness	250cd/m²
Contrast	700:1
Viewing Angle	89°/89°(L/R) 89°/89°(U/D)
Backlight	LED
Input	Type-C, Mini HDMI

Q & A

1. Why does the DH156 connected the power and turning on, but the screen turn off quickly?

Answer: Please make sure input signal and the smartphone model is in supporting range . (the smartphone must with USB-C 3.1 port and support DP output function ) PS: If the smartphone's USB-C power supply cannot support DH156 running. Try connecting the DH156 to an independent power supply.

2. Connected the power, but why the menu can’t be set?

Answer: The menu set only can be operated after the signal input.

Remark:
★ As we are improving product features and product performance, so if there is any change on the specification without prior notice.