Alpine OAK4501 Oak Basin Vanity Unit Installation Guide
- June 4, 2024
- Alpine
Table of Contents
Alpine OAK4501 Oak Basin Vanity Unit
Product Using Instructions
Assembly Steps
- Attach the side panels (8, 7) to the bottom panel (1) using screws (4x14mm) and dowels (8x30mm). Ensure all components are aligned correctly before securing.
- Affix the back panel (2) to the structure, sliding it into place and securing with screws (3x12mm).
- Place the top panel (3) onto the assembly and secure with dowels and cam locks.
- Install the shelf (4) by inserting cam bolts into the pre-drilled holes and securing with a cam lock. Attach the shelf support if necessary.
- Finalize the assembly by attaching the door (5) to the structure using the remaining hardware, including cam bolts and cam locks.
Additional Instructions
During assembly, make sure to use the correct screw sizes as indicated. The
4x14mm screws are used for securing the panels, while the 3x12mm screws are
meant for attaching the back panel. The dowels and cam locks are used to
secure the panels together, providing stability to the structure.
For the installation of the drawer runner, note that this component is not
included in the package and should be sourced separately if required.
FAQ
- What should I do if I have missing hardware?
- Contact the manufacturer or retailer to obtain any missing components before proceeding with assembly.
- Can I use a power drill for assembly?
- It is recommended to use a manual screwdriver to avoid damaging the wood or hardware. If using a power drill, set it to a low torque setting.
- Is the drawer runner included in the package?
- No, the drawer runner is not included and must be purchased separately.
Tools
Parts
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>