Qlima tuya D 720 WiFi Instruction Manual
- June 3, 2024
- Qlima
Table of Contents
D 720 WiFi OPERATING MANUAL
IMPORTANT NOTE:
Read the manual carefully before installing or connecting your Smart kit
(Wireless module). Make sure to save this manual for future reference.
DECLARATION OF CONFORMITY
Hereby, we declare that this Smart kit is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the full doc is attached. (European Union products only)
SPECIFICATION
Unit Model: D720
Model: EU-ODZ104(DEH);EU-ODZ104(PAC);
EU-ODZ104(Split);EU-ODZ104(WAC);
US-ODZ104(DEH);US-ODZ104(PAC);
US-ODZ104(Split);US-ODZ104(WAC).
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency Band: 2400-2483.5MHz
Operation Temperature: 0°C~45°C/32 F~113°F
Operation Humidity: 10%~85%
Power Input: DC 5V/500mA
Maximum TX Power: <20dBm
PRECAUTIONS
-
Applicable system: iOS, Android
– Please keep you APP up to date with the latest version.
– Due to special situations that may be occurred, we explicitly claim below: Not all of the Android and iOS systems are compatible with APP. We will not be responsible for any issue as a result of the incompatibility. -
Wireless safety strategy
– Smart kit only support WPA-PSK/WPA2-PSK encryption and no encryption. WPA- PSK/WPA2-PSK encryption is recommended. -
Cautions
– Due to different network situations, the control process may return to time- out sometimes. If this situation occurs, the display between the board and App may not be the same, please do not feel confused.
– Smart Phone camera needs to be 5 million pixels or above to make sure scans the QR code well.
– Due to different network situations, sometimes, request time-out could happen, thus, it is necessary to do network configuration again.
– The APP system is subject to update without prior notice for product function improvement. The actual network configuration process may be slightly different from the manual, but the actual process shall prevail.
– Please Check The Service Website For More information.
3. DOWNLOAD THE APP
You can download the app by searching for Smart Life in your app store or by scanning the following QR code.
https://smartapp.tuya.com/smartlife
REGISTRATION
Open the Smart Life app and tap “Sign Up”. In the User Agreement and Privacy Policy dialog box, carefully read the privacy policy and agreement and tap “Agree” to go to the account registration page.
NETWORK CONFIGURATION
Open the scan entry of the app
Tap Add Device or the plus icon (+) in the top-right corner on the Home page
to go to the device adding page; Scan entry will appear in the upper right
corner.
• Scan the QR Code for the Network
You can use the Smart Life app by scanning the QR code packed with the Smart
kit.
• Connect to the 2.4 GHz Wi-Fi network
On the page that appears, enter the password for connecting to the 2.4 GHz Wi-
Fi network. If you know how to perform pairing, select the correct device
pairing mode based on the status of the indicator. If you are not sure how to
perform pairing, tap Perform net pairing as prompted to view the guide.
• Connecting the device
Follow the App instruction to make sure your device is under AP mode, and then
tap “Next”.
• Connecting Wi-Fi hotspot
On the Wi-Fi setting page of the mobile phone, find the Wi-Fi hotspot starting
with SmartLife. Tap the WiFi hotspot to connect the mobile phone to it.
After a successful connection, go back to the app to start pairing. The Wi-Fi hotspots of certain devices might use a custom name. The mobile phone must be connected to a 2.4 GHz Wi-Fi network.
• Connecting the device
The device pairing page on the app appears again and the pairing process
continues. After the device is added, the user can customize the device name
and specify the room where the device is located. A device name can contain a
maximum of 64 characters.
CAUTIONS:
Unit Model: D720
Model: EU-ODZ104(DEH); EU-ODZ104(PAC);
EU-ODZ104(Split); EU-ODZ104(WAC);
US-ODZ104(DEH); US-ODZ104(PAC);
US-ODZ104(Split); US-ODZ104(WAC).
FCC ID: 2ADQOMDNA18
IC: 12575A-MDNA18
This device complies with Part 15 of the FCC Rules and it contains license-
exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and
Economic Development
Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Only operate the device in accordance with the instructions supplied.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 20cm (8 inches) during normal operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with the Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a maximum distance of 20 centimeters between the radiator and your body.
Importer & Manufacturer:
PVG Holding BV, Kanaalstraat 12 C, 5347 KM Oss, the Netherlands | P.O. Box 96,
5340 AB Oss, the Netherlands
The company will not be liable for any issues and problems caused by the
Internet, Wireless Router and Smart Devices.
Please contact the original provider to get further help.
Distributed in Europe by PVG Holding B.V.
If you need information or if you have a problem, please visit the our website (www.qlima.com) or contact our sales support (T: +31 412 694 694).
MarCom mvz©220214 wifi-man_D720 (‘22) V1
PVG Holding BV – Kanaalstraat 12 C – 5347 KM Oss – the Netherlands
P.O. Box 96 – 5340 AB Oss – the Netherlands
Documents / Resources
|
Qlima tuya D 720
WiFi
[pdf] Instruction Manual
tuya D 720 WiFi, tuya WiFi, D 720 WiFi, D 720, WiFi
---|---
References
- Qlima homepage
- Welcome to Comfortable Living: Explore Qlima's Home Page for Innovative Heating and Cooling Solutions
- Page d'accueil Qlima
- Qlima, esperti del comfort domestico
- Qlima homepage
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>