NEXIGO PJ06 Mini Portable Projector User Manual

NEXIGO PJ06 Mini Portable Projector

SPECIFICATIONS

• Imaging technology: LCD LED
• Light Source : LED
• Native Resolution: 1280 x 720
• Projection Distance : 2.62-11.48 ft
• Projection Size: 24-118 inches
• Aspect Ratio: 4:3, 16:9
• Projection Ratio : 1.4:1
• Power Input: DC 19V 2.5A 48W
• Integrated Watt Use: 48W
• Input Port: HDMI x 1, USB x 1
• Output Port: 3.5mm audio jack x 1
• Speaker: 3W x 1

PRODUCT USAGE INSTRUCTIONS

QUICK START
CHOOSING A LOCATION: The room’s size and layout will be the most important factors in choosing where to place the projector. Consider the following when selecting a location:

• Note: A specific rear projection screen is required to use the rear projection function.
• Ceiling mount (front projection)
• Ceiling mount (rear projection)
• Desktop mount (front projection)
• Desktop mount (rear projection)

POWER ON/OFF

1. Plug the power adapter into a power outlet.
2. Press and hold the Power Switch to turn on the projector. Press the Power Switch to turn off the projector. Alternatively, press the Power Switch on the remote to turn the projector on or off.

PROJECTOR DISTANCE & SIZE

FOCUS:
2.62ft – 4.92ft – 11.48ft
Note: Due to manufacturing tolerances, there may be variances of up to 3% from unit to unit. The above data is for reference only. Please use actual measurements when installing this device.

FOCUS ADJUSTMENT
Please use the Focus Adjustment Knob to adjust the focus, rotating it left or right until the image becomes clear and sharp. If the image appears blurry, rotate the knob in the opposite direction until the image clears up.

FREQUENTLY ASKED QUESTIONS (FAQ)

• Where can I download the latest manual or watch the installation video?
  You can scan the QR code provided in the user manual or visit nexigo.com/manuals for downloading the latest manual or installation video.

• What are the contents included in the box?
  The box includes 1 x Mini LCD Projector, 1 x Power Adapter, 1 x User Manual, 1 x Cleaning Kit, and 1 x Remote Control (batteries not included).

• How do I adjust the focus of the projector?
  Please use the Focus Adjustment Knob provided on the projector to adjust the focus by rotating it left or right until the image appears clear and sharp.

WELCOME TO THE NEXIGO FAMILY!

• Thank you for choosing the NexiGo PJ06 Mini LCD Projector! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems, please contact us any time at cs@nexigo.com for further assistance.
• This product is automatically covered by our industry-leading one year manufacturer’s warranty. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date, and we will extend your warranty coverage another year, for a total of two years!
• From all of us here at NexiGo, we want to thank you for your trust in us. We look forward to serving you again in the near future.
• Sincerely,
• The NexiGo Team

CONTACT INFORMATION

• Website: www.nexigo.com
• E-mail: cs@nexigo.com
• Manufacturer: Nexight INC
• Tel: +1(458) 215-6088
• Address: 11075 SW 11th St, Beaverton, OR, 97005, US

PROJECTOR DIAGRAM

BACK

1. Power Input Jack
2. HDMI Input Port
3. USB Input Port
4. 3.5mm Audio Jack

TOP

• 5. Lens
• 6. Focus Adjustment Knob
• 7. Right
• 8. OK (Press once)/ Power Switch (Press and hold)
• 9. Down
• 10. Left
• 11. Return

WHAT’S IN THE BOX?

• 1 x Mini LCD Projector
• 1 x User Manual
• 1 x Power Adapter
• 1 x Cleaning Kit
• 1 x Remote (Requires 2 AAA batteries, not included)

REMOTE CONTROL DIAGRAM AND FUNCTIONS

1. Power Switch: Toggles power on and off
2. Mute: Toggles audio on and off
3. Rewind: Go backward in the video/audio
4. Play/Pause: Toggles video pause and play
5. Fast Forward: Skips forward or moves quickly through video/audio
6. Left/Right/Up/Down: Navigates through the onscreen display
7. OK : Selects the current option
8. Menu: Displays the menu
9. Return : Returns to the previous screen
10. Signal Source: Displays the source selection menu
11. Vol +: Increases the volume level
12. Vol -: Decreases the volume level

CONNECTION INTRODUCTION

1. HDMI input for a TV box, TV stick, or computer.
2. USB input for a Hard Drive, USB Drive, or charging a USB device.
3. 3.5mm output for Audio Devices such as headphones and speakers.

SPECIFICATIONS

• Imaging technology LCD
• Light Source LED
• Native Resolution 1280 x 720
• Projection Distance 2.62-11.48 ft
• Projection Size 24-118 inches
• Aspect Ratio 4:3, 16:9
• Projection Ratio 1.4:1
• Power Input DC 19V 2.5A
• Integrated Watt Use 48W
• Input Port HDMI x 1, USB x 1
• Output Port 3.5mm audio jack x 1
• Speaker 3W x 1

QUICK START

CHOOSING A LOCATION

• The room’s size and layout will be the most important factors in choosing where to place the projector. Consider the following when selecting a location:
  • The size, shape, and position of your screen.
  • Location of a suitable power outlet.
  • Ensure the projector has sufficient space around it for airflow.
• The projector is designed to be installed in one of four layouts. You can either hang the projector from the ceiling via a standard 1/4″ mounting bracket (sold separately) or simply place it on a stable surface. You may need to change the projection mode so the images display correctly. Select Projection Mode under Setting> Picture Setting, then choose your preferred projection mode (see below).
  Note: A specific rear projection screen is required to use the rear projection function.

POWER ON/OFF

1. Plug the power adapter into a power outlet.

2. Press and hold the Power Switch to turn on the projector. Press the Power Switch to turn off the projector. Alternatively, press the Power Switch on the remote to turn the projector on or off.

PROJECTOR DISTANCE & SIZE
Note: Due to manufacturing tolerances, there may be variances of up to 3% from unit to unit. The above data is for reference only. Please use actual measurements when installing this device.

FOCUS ADJUSTMENT
Please use the Focus Adjustment Knob to adjust the focus, rotating it left or right until the image becomes clear and sharp. If the image appears blurry, rotate the knob in the opposite direction until the image clears up.

MULTI-MEDIA CONNECTIONS

This section shows you how to connect the projector to other equipment.

USB CONNECTIONS
Insert your USB drive into the USB port shown in the diagram below. In the on- screen menu, choose the type of content you want to open: Movie, Music, Photo, or Text.

MultiMedia

Multi-media Supported Format

| Audio Format| MP3/AAC/WAV/LOAS/PCM/OGG/ FLAC/AC3
---|---|---
Photo Format| JPEG/BMP/PNG
Video Format| DIVX/RM/3GP/AVI/MKV/FLV/MOV/ MP4/MPG/VOB/MPG/RMVB/RM
Text Format| TXT

HDMI CONNECTIONS
Plug an HDMI cable into the device you want to connect to the projector and then insert the other end of the HDMI cable into the HDMI port as shown in the diagram below. Open the on-screen menu and select the HDMI source in the Input Source tab. This will allow you to display the screen of whatever device has been plugged in.

Input Source

3.5MM AUDIO CONNECTION
To play sound from the source, plug either headphones or speakers into the 3.5mm audio port as shown below.

SETTING MENU

PICTURE SETTING

• Projection Mode: Shift the mode of the projector. The options are: Standard, Mirrored, Flipped, and Flipped and Mirrored.
• Image Scaling: Change the size of the objects shown on the screen.
• Color Range: Adjust the color range of the projector.
• Aspect Ratio: The aspect ratio is a figure that identifies the size of an image by its width and height. Common aspect ratios are 4:3 and 16:9.
• Picture Mode: Select one of four modes: Standard, Dynamic, Mild, or User. User mode enables custom settings for contrast, brightness, color, and sharpness.

SYSTEM SETTING

• OSD Language: Choose the language used in the projector menus.
• Software Update (USB): Update the software version on the projector.

1. Please check nexigo.com/support periodically for new firmware downloads.
2. Download the latest firmware to a USB flash drive, then insert the flash drive into a USB port on the projector.
3. In the menu screen, select: Setting>System Setting>Software Update (USB).
4. The software will update automatically. Do not try to use or turn off the projector until the update is complete. Interfering with the update process may damage the projector.  

Note: Updating firmware typically is not required and will only be necessary if instructed to do so by the NexiGo technical support team. The projector will reset after the software updates and all saved settings will be erased.

• Restore Factory Default: Reset the projector to factory default settings.
• Sleep Timer: Set the time duration for the projector to shut down automatically.

OTHER SETTING
OSD Timer: Set the time duration for the OSD menu to switch to the home page automatically.

FCC REQUIREMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNINGS

1. Read the manual carefully before you use the projector.

2. Unplug immediately if you notice any issues or problems with your projector.
   If your projector begins to smoke, make unusual noises, or any strange odor is noticed, immediately unplug your projector. Ensure that it is placed in an open area with ventilation, away from any objects that may be a fire hazard. Contact Customer Support for further details.

3. Do not remove the projector cover.
   This projector contains high voltage circuitry. Inadvertent contact may result in a severe electric shock and could result in death. Do not attempt to service this product yourself. Please contact the manufacturer directly if you have any issues to exercise your warranty.

4. Do not modify this equipment.

5. Avoid dropping or throwing the projector.

6. Do not face the projector lens to the sun.

7. Use only the provided power cable.

8. Do not place the projector on an uneven or unstable surface, or one that is subject to vibration.

9. Do not place this device near another device that produces a strong magnetic field or one with a heavy electrical load.

10. Do not look into the lens when the projector is operational. It may causes permanent eye damage.

11. Do not turn off the main power abruptly or unplug the projector during operation. Wait until the fan has turned off before powering off fully.

12. Do not attempt to use the projector in a vertical orientation.

13. Place the projector within a slope of ±15°. Any greater slope presents dangers of the unit sliding and falling.

14. Avoid obstructions around the projector air vent as this may cause damage to the unit or create a fire hazard.

15. This unit may be damaged by liquids. Keep liquids away from the unit to prevent damage. Liquid damages are not covered by the warranty.

16. If the projector is unused for a prolonged period of time unplug it from the power source.

17. If there are any mechanical issues with the projector, please contact NexiGo Support to exercise the warranty; Do not attempt to repair the item yourself.

18. Safe Operational Parameters

    • Operating temperature: between +41°F (+5°C) and +95°F (+35°C).
    • Operating humidity: between 30 and 90%.

FOR MORE INFO

• Get in touch with FREE online services. facebook.com/letsnexigo
• Register to get EXTRA ONE YEAR warranty. Only valid in registering within 14 days of product delivery. nexigo.com/warranty

References

• Support Center | NexiGo
• NexiGo Warranty Registration | NexiGo
• NexiGo | Home Theater Projectors & Video Collaborations

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>