YELLOW JACKET 67069 Carrying Case Instruction Manual Quick Start Guide
- June 1, 2024
- YELLOW JACKET
Table of Contents
Quick Start Guide
**Power on the YJACK FLOW ‘ device and connect to the appropriate probe
18″ or 36″.**
To view the active air speed readings on the Electronic Paper Display,
select the desired settings.
TO CHANGE A SETTING:
- Tap the corresponding button to highlight the current setting
- Continue to tap this button until the desired value is displayed
- Press and hold this button for 2 seconds to confirm the new setting— the setting will be confirmed and the highlighting will disappear when the button is released
DISPLAY : Select from several notification options. To change the background, press and hold for three seconds to inverse LCD mode.
ON/OFF : Power on and off, select from four auto-off timer settings.
POWER SAVING MODE : Powers off display after the set duration in minutes of inactivity to extend battery life while viewing readings remotely. Press any button to refresh the display.
For remote viewing of readings, launch the YJACK VIEW’ app, select the
desired settings and Anemometer session type. There is no Bluetooth® pairing required.
When finished, power devices off and store in a dry, temperature.
For additional information, please see the digital YJACK® user manual located at www.yellowjacket.com. Visit the app store or follow the QR codes below to download the YJACK VIEWR app.
Ritchie Engineering Company/YELLOW JACKET® Customer Service 1-800-769-8370 or 952-943-1300 www.yellowjacket.com 502906 RevB
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>