Rupt Group AEROTUNES Wireless Open Ear Earbuds User Manual

Rupt Group AEROTUNES Wireless Open Ear Earbuds

Product Information

Specifications

• Product Type: Open ear wireless earbuds
• Dimensions: 1036133mm
• Weight: 100g (earbuds: 10g)
• Driver: 15.4mm
• Audio Playback: Approx 5 hours (@50-60% Volume)
• Bluetooth Version: V5.3
• Rate Power: 30mW
• Battery Capacity: Case – 3.6V 65mAh, Earbuds – 3.7V 750mAh
• Charging Time: Charging case – Approx 2 hours (USB C), Earbuds – Approx 1.5 hours
• Frequency Response Range: 100-20KHZ
• Input Power: Up to 10m, 5V/1A
• Built-in Stereo Microphone

Product Usage Instructions

What’s in the box

• 2 Wireless Open Ear earbuds
• 1 Charging case
• 1 USB cable
• 1 User manual

Bluetooth Connection

1. Open the phone’s Bluetooth settings.
2. Click on “Aerotunes” to pair the earbuds with your phone.

Note: If the earbuds are not paired within 15 minutes after turning them on, they will automatically shut down. When the battery is low, you will hear a prompt tone and the earbuds will power off automatically. Apple users can also try turning off the “Reduce Loud Sounds” setting on their phones (Settings – Sounds & Haptics – Headphone Safety – Reduce Loud Sounds) if they feel the volume is low.

Charging Status:
The battery meter inside the case will indicate the battery level of the case. The LED display on the case shows the charging status.

FAQ

• Q: How long does the audio playback last?
  A: The audio playback lasts approximately 5 hours at 50-60% volume.

• Q: How do I charge the earbuds and the case?
  A: Use the provided USB cable to connect the charging case to a DC5V/1A adapter or a USB port. The charging time for the case is approximately 2 hours, and for the earbuds, it is approximately 1.5 hours.

• Q: Can I use the earbuds while charging?
  A: Yes, you can use the earbuds while they are charging in the case.

What’s in the box

Key functions-earbuds

• Play/pause:Double-tap the MFB on L/R.

• Previous track:Press and hold the MFB on L for 2 seconds. Note:In mono mode,Double-tap on the MFB on L will trigger next song function.

• Next song:Press and hold the MFB on R for 2 seconds.

• Volume down:Single-tap the MFB on L.

• Note:In mono mode,volume adjustment is unavailable.

• Volume up:Single-tap the MFB on R.
  Note:In mono mode,volume adjustment is unavailable.

• Answer/hang up a call:Double-tap the MFB on L/R.

• Reject a call:Press and hold the MFB on L/R for 2 seconds when calling.

• Activate voice assistant:Triple L/R while connect with devices.

LED display

Paring:blue and white light flash alternately Paired:light off
Charging:red light on Fully charged:Red light off

Key functions-Case

Notes:

1. Charging with DC5V/1A adaptor or USB Cable
2. While max/minium volume,you can hear a prompt tone

Bluetooth Connection

Specifications

Safety Instructions

1. Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
2. Avoid liquid immersion into the product.
3. Do not disassemble the product.
4. Do not use concentrated chemical products or detergents to clean the product.
5. Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
6. Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.

The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>