WELOCK EBL61 Best Password Bluetooth Smart Door Lock Instructions
- June 1, 2024
- WELOCK
Table of Contents
WELOCK EBL61 Best Password Bluetooth Smart Door Lock Instructions
Product Components
Accessories list (TOOL BOX)
If there is alack of accessories. please contact customer service in time.
Install battery
Both front and rear handles can be installed and removed
Rear handle
Adjust the length of the cylinder
Depending on the required cylinder length you can adjust the interior and exterior length by loosening the screw with the screwdriver and then pulling out the handle upon need ighten the screws after adjustment.
Installation pictures
Restart Diagram
- Opening the silicone cover
- Find the Thimble in the attached accessories
- Find the hole where the restart button is located
- Insert the thimble into the hole and press the restart button
- Just for re-selecting the language settings.
Setting operation:
Press the Set button for 5 seconds to enter the setup menu and set the
fingerprint lock function. Press the set button several times to switch
between different settings.
Each button needs to be completed within 2 seconds.
1. Register administrator fingerprint
Press the Set button for 5 seconds, add an ad min fingerprint. A total of 3 ad
min fingerprints can be set. Only administrators can set up operations. When
registering the first administrator, there is no need to verify the ad min
fingerprint. When registering the follow-up administrator fingerprint and
performing other setting operations, the registered ad min fingerprint must be
verified first, and subsequent operations can be performed afterward.
Fingerprint registration requires 3 times fingerprints scan.
2. Register user fingerprint
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button once, add user fingerprint. First verify the admin fingerprint,
after the verification can be continuously registered user fingerprints,
overtime can exit. The number of user fingerprints is 97. When an ad min is
not registered, the user fingerprints cannot be registered.
3. Delete user fingerprint:
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button twice, delete a single user fingerprint. First, verify the ad min
fingerprint. After the verification pass, select to delete the fingerprint of
the specified user {Press the fingerprint or delete it in the APP) {ID
No.4-100).
4. Clear admin fingerprint:
Press the Set button for 5 seconds, verify the admin fingerprint. Press the Set button 3 times, delete all admin fingerprints. First, verify the admin fingerprint, after the verification pass, the system will delete all ad min fingerprints.
5. Clear user fingerprint:
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button 4 times, delete all user fingerprints. First, verify the admin
fingerprint, after the verification pass, the system will delete all user
fingerprints.
{ID No.4-100)
6. Add RFID card:
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button 5 times, add the RFID card. First, verify the fingerprint
administrator. After the verification pass, add the RFID card. RFID cards can
be added continuously. The maximum capacity is 20pcs. Supports 13.56MHz cards.
7. Delete RFID card:
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button 6 times, delete the RFID card. First, verify the ad min
fingerprint. After the verification pass, select to delete a registered RFID
card.
{Swipe the card or delete in the APP) {ID No.1-20)
8. Clear RFID card:
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button 7 times, clear the RFID card. First, verify the ad min fingerprint.
After the verification pass, clear all registered RFID cards.
9. Add Bluetooth remoter
Press the Set button for 5 seconds, verify the admin fingerprint. Press the
Set button 8 times, wait for the remote control to connect {long-press the
Bluetooth remote control, release when the red indicator turns to a lightcolor
indicator)
10. Clear Bluetooth remoter:
Press the Set button for 5 seconds, verify the ad min fingerprint. Press the
Set button 9 times, verify the ad min fingerprint. After the verification
pass, clear all Bluetooth remotes.
11. Switch language:
(1) After reinstalling the battery, quickly press the Set button ta select the
language {English, German, Chinese).
(2) Press the Set button for 5 seconds, verify the ad min fingerprint. Press
the Set button 10 times, switch language. You can switch {press the Set
button) between English, German and Chinese. Language settings are not
affected by the Factory Reset operation. If no registered ad min, no need to
verify the ad min.
12. Set the lock time:
Press the Set button for 5 seconds, verify the ad min fingerprint. Press the
Set button 11 times, enter the lock time setting, can set the time between
after unlocking to lock. The scope is 5 to 14 seconds to meet different
requirements.
After verifying the admin fingerprint, if press the Set button once, it means
the locking time will be added I second, and it will display on the screen. If
there is no operation in 2 seconds, the system will choose the default as the
locking time. The factory setting is 10 seconds. Before registering the admin,
no need to verify the ad min.
13. Turn on/off Bluetooth:
Press the Set button for 5 seconds, verify the ad min fingerprint. Press the
Set button 12 times, turn on/off Bluetooth. If the Bluetooth is turned on
status, the Bluetooth will be turned off. If the Bluetooth is turned off
status, the Bluetaoth will be turned on. Turn on/off Bluetooth settings are
not affected by the Factory Reset operation.
14. Turn on/off sound:
Press the Set button for 5 seconds, verify the ad min fingerprint. Press the
Set button 13 times, turn on/off the sound. If the sound is turned on status,
the sound will be turned off. If the sound is turned off status, the sound
will be turned on.
15. Restore factory setting:
Press the Set button for 5 seconds, verify the ad min fingerprint. Press the
Set button 14 times, Clear and restore factory setting. First, verify the
admin fingerprint, after passed it will delete all data including admin
fingerprint, user fingerprint, and registered RFID card. If no registered
admin, no need to verify the ad min.
16. Lower voltage alarming:
When the voltage is lower than 3.6V, after waking up, the voltage will alarm;
When the lower voltage is alarmed, please change the batter as soon as
possible.
17. USB Emergency backup key
Open the QR code cover on the front handle, use the USB port to power on, and
connect the App to unlock automatically.
The operation of opening the lock:
Wake up: the system will be in a dormant state usually. If need verifies the
fingerprint or swipe card, first, need to press the wake-up button in a short
time to wake up the system. Then, verify the fingerprint or swipe card. Press
the wake-up button in 5 seconds to enter the setting menu. Before registering
any fingerprint, any fingerprint and RFID card can open the lock.
After registered fingerprint and RFID card, need registered fingerprint or
RFID card to unlock. After verifying the fingerprint and RFID card
successfully, the display screen will display the user ID No. The unlock time
is 5 to 14 seconds, then the lock will lock automatically.
Unlock and lock
Unlock the door from outside
The knob can be rotated 360″degree freely after locked.
To protect the lock not be damaged by torsion forcefully.
Scan the QR code on the lock
Downloadable Instructions
&
Watch Videos
A smart way to open your door.WE.LOCK
www.WELOCK.com
Bluetooth activation and login instructions
Scan the QR code on the lock
Select “Android/iOS” to download
Log in to the app
- CD Select your country/region
- Enter the phone number/email to get the verification code
- Click”Send”
- Enter the verification code after receiving the message
- Click”Login”
Bind the device
Specifications
FAQ
-
How can I know the lock is out of power?
Each time you use, there is a screen above the fingerprint device shows the power. Low battery suitable, APP will prompt low battery tips, and send text messages to the phone, -
Does the lock knob still works after I replaced the lock?
It still works. It only replace the cylinder. It won’ t
effect the other function of the original lock, -
Will it read slowly or fail to recognize the fingerprint after long time using?
It won’t. The fingerprint sensor has a special protect film on it. -
Is it complicated to set?
It’ s easy, You just need to use the thimble to press the set key to register the fingerprint. The screen will show you the function to choose and just press your fingerprint on it. -
lf we install all the houses’ doors with We. Lock, can we use the phone APP to unlock all of it?
Yes, you can. One phone can in charge many different locks. Just remember to mark the name of each lock. -
Online Service:
Email: service@welockglobal.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>