WELOCK PCB10EBL41 Bluetooth smart Door Lock Instructions
- June 10, 2024
- WELOCK
Table of Contents
- WELOCK PCB10EBL41 Bluetooth smart Door Lock
- OVERVIEW
- Applicable size
- Product Components
- Flow chart
- Accessories list
- Install battery
- Adjust the length of the cylinder
- Installation pictures
- Resetting diagram
- Unlock and lock
- FAQ
- Bluetooth activation and login instructions
- Bind the device
- Specifications
- Operating instruction
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WELOCK PCB10EBL41 Bluetooth smart Door Lock
OVERVIEW
Applicable size
Product Components
Flow chart
Passcode
RFID card:
Other settings
Scan the QR code on the lock
Downloadable Instructions Watch Videos
A smart way to open your door.WE.LOCK www.WELOCK.com
Accessories list
(TOOL BOX)
If there is alack of accessories,please contact customer service in timne
.
Install battery
- Loosen the screws with alien key
- Open the stainless steel cover
- Open the battery cover
- 3 * AAA battery (Please buy ii by yourself)
- lnstall battery
- Fix the battery cover and tighten the screws
Adjust the length of the cylinder
- Depending on the required cylinder length you can adjust the interior and exterior length by loosening the screw with the screwdriver and then pulling out the handle upon need.
- Tighten the screws after adjustment and plug the adjustment holes with silicone plug. which can play a certain waterproof effect.
- Due to the security reason,the front handle cannot be taken off
Installation pictures
- Remove the fixing screw and original cylinder
- Take out the screws and take out the rear handle
- The lock cylinder is installed into the lock hole from the outside
- Installation Fixing screws
- Install rear handle
- Fixed rear handle screw
Resetting diagram
- Opening the silicone cover
- Find the Thimble in the attached accessories
- Find the hole where the reset button is loc a ted
- Insert the thimble into the hole a nd press the reset button
Unlock and lock
Unlock the door from outside
- The knob can be rotated 360 degree freely after locked.
- To protect the lock not be damaged by torsion forcefully.
Low battery prompt
- After 3 “beep beep beep” beeps The screen prompts: “Battery Low”.
- Please replace the battery promptly when the above message appears
FAQ
-
What should I do when I receive the lock?
When you received the lock, please modify the default password “123456” to your own ad min password first, so please keep it in your mind. -
Where can I find the lock ID?
Please find the lock ID with 8 digits number on the middle of lock, or find it on packing box. -
When will the low battery alarm?
The battery is below 20%. -
What is the USB backup key for?
USB backup key is spare key, for emergency situations, like when the lock is broken or battery run out, then you can use power bank to charge the lock via USB cable, then use our opp to unlock the lock. -
How can contact customer service?
Please contact this email:
Service@WelockGlobal.com
Bluetooth activation and login instructions
Scan the QR code on the lock
Select “Android/iOS” to download
Log in to the app
- Select your country/region
- Enter the phone number/email to get the verification code
- Click”Send”
- Enter the verification code after receiving the message
- Click”Login”
Bind the device
Specifications
Operating instruction
-
Enter the wrong passcode 5 times continuously. the system is locked for three minutes and cannot operate.
-
PressO to wake up the keyboard+ 10 digits temporary passcodeEnter the wrong passcode 5 times continuously, the system is locked for three minutes and the cannot operate.
Temporary passcode generation needs to be donein the App.
The time on the screen should be the same as the time on the phone, otherwise, the temporary passcode will be invalid. -
PressO to wake up the keyboard+ swipe the IC cards
Swipe the unmatched card 5 times continuously, the system is locked for three minutes and cannot operate. Any IC card can unlock the door in factory state. -
Bind the lock on the APP
Bind the lock on the APP via Bluetooth, click “unlock” , and the phone time will be synchronized to the lock via Bluetooth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>