WELOCK PCB10KEY27 Smart Lock Instruction Manual

June 16, 2024
WELOCK

PCB10KEY27
Instruction PCB10KEY27 Smart Lock

Applicable size

Product Components

Accessories list (TOOL BOX)

If there is alack of accessories.please contact customer service in timne.

Install battery

  1. Insert the battery installation assistance  tool and rotate to open the battery compartment cover
  2. lnstall battery
  3. 0pen the silicone cover
  4. Tighten the screws

Installation pictures

  1. Take out the original mechanic allock cylinder
  2. Take out the screws and take out the rear handle
  3. Use alien wrench to adjust the ock cylinder connector to the maximum length
  4. The lock cylinder is installed into the ock hole from the outside
  5. Installation Fixing screws
  6. Use allen wrench to adjust the lock cylinder connector toa suitable length
  7. Install rear handle
  8. Fixed rear handle screw

Operating instruction

  1. Enter the wrong passcode 5 times continuously . the system is locked for three minutes and cannot operate.
  2. Press to wake up the keyboard+10 digits temporary passcodeEnter the wrong passcode 5 times continuously, the system is locked for three minutes and the cannot operate.Temporary passcode generation needs to be donein the App.The time on the screen should be the same as the time on the phone, otherwise the temporary passcode will be invalid.
  3. Press to wake up the keyboard+ swipe the IC cards Swipe the unmatched card 5 times continuously, the system is locked for three minutes and the cannot operate. Any IC card can unlock the door in foctory state.
  4. Bind the lock on APP
    Bind the lock on APP via Bluetooth, click “unlock”, and the phone time will be synchronized to the lock via Biuetooth.

Unlock and lock
Unlock the door from outside

Uresetting diagram

  1. Opening the silicone cover
  2. Find the Thimble in the attached accessories
  3. Find the hole where the reset button is located
  4. Insert the thimble into the hole and press the reset button

Bluetooth activation and login instructions

Select “Android/iOS” to download

Log into the app

  1. Select your country/region
  2. Enter the phone number/email to get the verification code
  3. Click”Send”
  4. Enter the verification code after receiving the message
  5. Click”Login”

Blind the device

Specifications

Brand WE.LOCK
Applicable door types Wooden doors, Interior doors
Adjustable range 65-105 mm
Operating Temperature -25°C – 60°C
Pressing Cycle Times 100,000 Times
Material of handle Zine Alloy
Way to unlock Passcode / IC card / Bluetooth
Battery Type 4*AAA Battery
Power input 4V-6V
Battery Replacement Replaceable
Color Silver/ Black
___Battery Life >1 year

FAQ

• What should Ido when! receive the lock?

• Where can I find the lock ID?

Please find the lock ID with 8 digits number on the middle of lock, or find it on packing box.

• When will the low battery alarm?

The battery is below 20%.

• What is the USB backup key for?

USB backup key is spare key, for emergency situations, like when the lock is broken or battery run out, then you can use power bank to charge the lock via USB cable, then use our app to unlock the lock.

• How can contact customer service?

Please contact this email: Service@WelockGlobal.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals