HORNIT HERO 14 Kids Bike Instruction Manual

HORNIT HERO 14 Kids Bike

Product Information

The Mudguard Installation kit comes with components required for both front and rear mudguard installation. The kit includes Front Mudguard, Front Stay, Rear Mudguard, Rear Stay, screws, bolts, nuts, washers, and brackets. The tools required for installation are 3, 4 & 5mm Allen keys, 1 Phillips Screwdriver, 8mm or adjustable Spanner, and Bike Pump.

Assembly Components for Front Mudguard

• Front Mudguard
• Front Stay
• x2 Phillips Screw
• x1 Long Socket Bolt
• x1 Nut
• x1 Washer
• x1 Inner Bracket
• x1 Outer Bracket

Assembly Components for Rear Mudguard

• Rear Mudguard
• Rear Stay
• x1 Push Rivet
• x1 Hex Head Screw
• x2 Socket Screws
• x2 Phillips Screws
• x1 Inner Bracket
• x1 Outer Bracket

Product Usage Instructions

Front Mudguard Installation Steps:

1. Rest the bike upside down on a soft surface such as a carpet.
2. Undo the brake callipers and remove the front wheel by loosening axle bolts and carefully lifting out of dropouts.
3. Insert the first Phillips head screw for the stay bracket until the finger is tight (you will securely fasten it later).
4. Insert the stay and secure it with the second screw.
5. Attach the mudguard by placing the mounting plate at the rear of the forks, insert the long socket bolt and washer then thread the nut until the finger is tight.
6. Using a 4mm Allen key attach the stay loops to the forks using existing bolts.
7. Locate the wheel in the dropouts and tighten the axle bolts. Check mudguard alignment then tighten the Phillips head screws in the bracket.
8. Using a spanner and 5mm Allen key, tighten the socket bolt until fully secure.
9. Reattach the brake and test.

Rear Mudguard Installation Steps:

1. Attach stay to mudguard using brackets and Phillips head screws until finger tight (you will securely fasten later).
2. Place a mudguard around the wheel.
3. Attach stay loops to dropout eyelet mounting points with socket screws using a 3mm Allen key, note hole position.
4. Deflate the tyre by removing the valve cap and pushing the metal pin with an Allen key. Compress tyre to increase access. Extend the kickstand if fitted and attach the hex head screw to the kickstand mounting plate using your fingers, finishing with an 8mm spanner. It can be convenient to have someone help with this.
5. Insert the push rivet into a mounting point on the seat stay bridge – Press firmly with a finger or thumb.
6. Reinflate the tyre 40-65psi (2.8-4.6 bar) and check braking action so that the mudguard sits true. Tighten all fixings.

Components

Tools required

ASSEMBLY

FRONT

Components

Rest the bike upside down on a soft surface such as carpet. Undo the brake callipers and remove front wheel by loosening axle bolts and carefully lifting out of droputs.

Attach the mudguard by placing the mounting plate at the rear of the forks, insert the long socket bolt and washer then thread the nut until finger tight.

Using a 4mm Allen key attach the stay loops to the forks using existing bolts.

Locate the wheel in the dropouts and tighten axle bolts. Check mudguard alignment then tighten the Phillips head screws in the bracket.

Using a spanner and 5mm Allen key, tighten the socket bolt until fully secure. Reattach brake and test.

REAR

Components

Attach stay to mudguard using brackets and Phillips head screws until finger tight (you will securely fasten later).

Place mudguard around wheel.

Attach stay loops to dropout eyelet mounting points with socket screws using 3mm Allen key, note hole position.

Deflate tyre by removing valve cap and pushing metal pin with an Allen key. Compress tyre to increase access. Extend kick stand if fitted and attach hex head screw to kick stand mounting plate using your fingers, finishing with 8mm spanner. It can be convenient to have someone help with this.

Insert push rivet into mounting point on seat stay bridge – press firmly with finger or thumb.

Reinflate the tyre 40-65psi (2.8-4.6 bar) and check the braking action and that the mudguard sits true. Tighten all fixings.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>