WELOCK PCB10KEY28 WiFi Smart Lock Door Knob Instructions
- June 13, 2024
- WELOCK
Table of Contents
PCB10KEY28
Instruction
PART
LIST FIGURE
- Screws for battery compartment
- Front Handle
- Front Panel
- Screw casing
- Profile cylinder
- Scerws for profile cylinder
- Toggle lever
- Rear Panel
- Scerws for rear Panel
- Rear handle
- Mounting bracket
- Mounting bracket screw
- Mbase
- Product ID
Accessory list(TOOL BOX)
Install Battery
Operating instruction
- If enter wrong passcode 5 times continuously, the system will be locked for three minutes and cannot operate.
- Press to wake up the keyboard+10 digits temporary pass code. Enter wrong passcode 5 times continuously, the. system will be locked for three minutes and can not operate. Temporary passcode generation needs to be done in the App. The time on the screen should be same as the time on the phone otherwise the temporary passcode will be invalid.
- Press to wake up the keyboard+ swipe the RFID cards. Swipe the unmatched card Stimes continuously, the system is locked for three minutes and cannot operate. Any RFID card can unlock the door in factory state.
- Bind the lock on APP. Bind the lock on APP via Bluetooth, click” unlock”, then the phone time will be synchronized to the lock via Bluetooth,
Unlock and lock
Unlock the door from outside. You can unlock the door from any direction. To protect the door from damage by forceful torsion, the front handle will keep free rotating until the lock is unlocked by correct way.
Resetting diagram
Installation diagram
Picture of installation Inward opening door: The inclined surface of the bolt
face outwards when installing 
Applicable size
Bluetooth activation and login
instructions
Log into the app
- Select your country/region 0‘
- Enter the phone number/email to get the verification code.
- Click’ Send
- Enter the verification code after receiving the message
- Click’ Login”
Bind the device
Specifications
| Brand | WE.LOCK |
|---|---|
| Applicable door types | Wooden doors,lnterior doors |
| Adjustable range | 1 3/16″to 2 23/64″(30-60mm) |
| Operating Temperature | -25°C-60°C |
| Pressing Cycle Times | 100,000 Times |
| Material of handle | Zinc Alloy |
| Way to unlock | Passcode / Bluetooth |
| Battery Type | 4*AAA Battery |
| Power input | 4V-6V |
| Battery Replacement | Replaceable |
| Color | Silver/Black |
| KBattery Life | >1 year |
FAQ
When should you replace the battery?
When the low battery alarm occurs,the battery needs to be replacedin time.
When will there be low battery alarm?
When the battery powerisless than 20%.
How can you enter scramble code?
Enter any number before and after a correct passcode,30 digits or less.
How can you unlock the lock when the battery runs out?
You can use a mobile power supply to power thelock via a micro USB cable,and then use our App to unlock.
How can | contact customer service?