WELOCK PBL20EBL41 Electronic Door Lock Instruction Manual

June 13, 2024
WELOCK

WELOCK PBL20EBL41 Electronic Door Lock

WELOCK-PBL20EBL41-Electronic-Door-Lock-product

Parts

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-1

Applicable size

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-2

Product Components

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-3 WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-4

Language: Flow chart

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-5

Passcode: Flow chart

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-6

Other settings: Flow chart

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-7

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-8

Accessories list

Accessories list (TOOL BOX)

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-9

  • If there is alack of accessories,please contact customer service in time.

Install battery

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-10

  1. Loosen the screws with allen key
  2. Open the stainless steel coverWELOCK-PBL20EBL41-Electronic-Door-Lock-fig-11
  3. Open the battery cover
  4. AAA battery
    • (Please buy it by yourself)WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-12
  5. Install battery
  6. Fix the bottery cover and tighten the screws

Adjust the length of the cylinder

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-13

Depending on the required cylinder length you can adjust the interiorand exterior length by loosening the screw with the screwdriver and then pulling out the handle upon need. Tighten the screws after adjustment and plug the adjustment holeswith silicone plug. which can play a certain waterproof effect.

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-14

  • Due to the security reason, the front handle cannot be taken off.

Installation pictures

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-15

  1. Remove the fixing screw and original cylinder
  2. Take out the screws and take out the rear handleWELOCK-PBL20EBL41-Electronic-Door-Lock-fig-15
  3. The lock cylinder is installed into the lock hole from the outside
  4. Installation Fixing screwsWELOCK-PBL20EBL41-Electronic-Door-Lock-fig-17
  5. Install rear handle
  6. Fixed rear handle screw

Resetting diagram

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-18

  1. Opening the silicone cover
  2. Find the Thimble in the attached accessories
  3. Find the hole where the reset button is located
  4. Insert the thimble into the hole and press the reset button

Unlock and lock

Unlock the door from outside

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-19

  • The knob can be rotated 360 degree freely after locked.
  • To protect the lock not be damaged by torsion forcefully.

Low battery prompt

After waking up, the screen displays:

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-21

  • After 3 “beep beep beep” beeps The screen prompts: “Battery Low’.
  • Please replace the battery promptly when the above message appears.

FAQ

  • What should I do when I receive the lock?
    • When you received the lock, please modify the default password “123456” to your own admin password first, so please keep it in your mind.
  • Where can I find the lock ID?
    • Please find the lock ID with 8 digits number on the middle of lock, or find it on packing box.
  • When will the low battery alarm?
    • The battery is below 20%.
  • What is the USB backup key for?
    • USB backup key is spare key, for emergency situations, like when the lock is broken or battery run out, then you can use power bank to charge the lock via USB cable, then use our app to unlock the lock.
  • How can contact customer service?

Bluetooth activation and login instructions

Scan the QR code on the lock

Select “Android/iOS” to download

Log in to the app

  1. Select your country/region
  2. Enter the phone number/email to get the verification code
  3. Click”Send”
  4. Enter the verification code after receiving the message
  5. Click”Login”

Bind the device

WELOCK-PBL20EBL41-Electronic-Door-Lock-fig-25

Specifications

Brand/ WE.LOCK

  • Applicable door types: Wooden doors, Interior doors
  • Adjustable range: 50-100 mm
  • Operating Temperature: -25°C – 60°C
  • Pressing Cycle Times: 100.000 Times
  • Material of handle: Zine Alloy
  • Way to unlock: Passcode / IC card / Bluetooth
  • Battery Type: 3*AAA Battery
  • Power input: 3.6V-4.5V
  • Battery Replacement: Replaceable
  • Color: Silver
  • Battery Life: 10-12 months

Operating instruction

  1. Enter the wrong passcode 5 times continuously. the system is locked for three minutes and cannot operate.
  2. Press to wake up the keyboard+ 10 digits temporary passcodeEnter the wrong passcode 5 times continuously, the system is locked for three minutes and the cannot operate.
    • Temporary passcode generation needs to be donein the App.
    • The time on the screen should be the same as the time on the phone, otherwise the temporary passcode will be invalid.
  3. Press to wake up the keyboard+ swipe the IC cards Swipe the unmatched card 5 times continuously, the system is locked for three minutes and the cannot operate. Any IC card can unlock the door in factory state.
  4. Bind the lock on APP
    • Bind the lock on APP via Bluetooth, click “unlock”, and the phone time will be synchronized to the lock via Bluetooth.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals