Vasco D350 Silencer Galvanised Steel Installation Guide
- June 1, 2024
- Vasco
Table of Contents
Vasco D350 Silencer Galvanised Steel Installation Guide
INSTALLATION
Depending on your inside cover, remove the cover and filter (A) or the entire inside cover with spigot (B)
Measure the distance X between the fan unit and the inner wall
Cut the sound insulation mat according to the measured value minus 5 mm. For inside covers with spigots (B), the length of the spigot Y must also be subtracted
Roll up the sound insulation mat with the coating facing inwards (1) and put
the covers on it at the front and back
(2). Start at the rib of the cover and carefully push the foam in.
Carefully slide the assembled silencer set into the mounting tube. Note the
position of the fan cable and align the
groove in the silencer set accordingly
Depending on your inside cover, reinstall the cover and filter (A) or the entire inside cover with spigot (B).