UNITEK D1103A01 Universal Dual 4K KVM Docking Station Instruction Manual
- June 1, 2024
- UNITEK
Table of Contents
UNITEK D1103A01 Universal Dual 4K KVM Docking Station
Specifications
- Ports: 13 – USB-A Data (5Gbps), Gigabit Ethernet (1000Mbps), DP (4K60Hz), HDMI (4K60Hz), HDMI (4K60Hz), USB PD (100W), USB-C Data(5Gbps), USB-C Data (10Gbps), USB-A Data (10Gbps), USB-A Data (5Gbps), Card Reader x2 (24mm & 11mm), Audio 3.5mm jack adapter, KVM Switch Button
- Compatibility: Windows XP or later ver., Mac OS X or later ver., Linux USB 10Gbps
- Charging Function: Requires support for USB Power Delivery (PD) or Thunderbolt 3 technology
Product Usage Instructions
-
Step 1: Download Driver
Visit www.displaylink.com/downloads to download the latest DisplayLink driver based on your computer system. -
Step 2: Install Driver
After downloading the driver, install it on your system before using the docking station. -
Step 3: Set Up Resolution
Configure the display resolution settings as needed for optimal performance. -
Step 4: Connect Devices
Connect your laptops to the docking station using the appropriate ports and cables for data transfer and charging. -
Step 5: Use KVM Switch
If you want to switch between the connected laptops, press the KVM Switch Button on the docking station.
FAQ
-
Q: What systems are supported by the docking station?
A: The docking station is compatible with PCs, laptops, and tablets running Windows XP or later versions, Mac OS X or later versions, and Linux with USB 10Gbps support. -
Q: How do I enable the charging function for my device?
A: To use the charging function, ensure that your device supports USB Power Delivery (PD) or Thunderbolt 3 technology. -
Q: Where can I find further support information?
A: For additional support, visit www.unitek-products.com or contact support via email at support@unitek- products.com.
Product Overview
INSTRUCTION
Driver is required for this product, please download the latest DisplayLink driver from the official website before use
- Go to www.displaylink.com/downloads
- Choose your computer system
- Set up the resolution
- Download the latest driver and install
Package Contents
- Universal Dual 4K KVM Docking Station
- USB 10Gbps A to C Cable (1M)
- USB 10Gbps C to C Cable (1M)
- 2-in-1 USB 10Gbps Cable (30mm)
- User Manual
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, like all electrical products, out of the reach of children!
Warranty Disclaimer
UNITEK assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes
Technical Data
- Compatibility USB-C or USB-A port
- Systems Supported (PC, Laptop & Tablet) Windows XP or later ver. Mac OS X or later ver. Linux
- USB Specification USB 10Gbps
Note
To use the charging function for the upstream device, it musts upport USB
Power Delivery (PD) or Thunderbolt 3 technology.
Service and Support
Further support information can be found here: www.unitek- products.com Email: support@unitek- products.com
The crossed out trash can sign means that the equipment must not be disposed of with other waste. It should be disposed of in special containers according to the information prepared by the local government.