UNITEK S1206B USB 20Gbps Type-C to Dual M.2 PCIe NVMe SSD Enclosure User Manual

**UNITEK S1206B USB 20Gbps Type-C to Dual M.2 PCIe NVMe SSD Enclosure User Manual

**

Thanks for choosing Unitek USB (20Gbps) Type-C to Dual M.2 PCIe NVMe SSD Enclosure with Offline Clone, which allows quick and easy installation of your M.2 NMVe SSDs and transform your data. Please read this manual carefully and if you need any further assistance, please contact our customer support team at[email protected].

Product Diagram

LED status:

1. Power light, green, always on when power on, and it will go into dormant state without reading and writing for 30 minutes.
2. Clone progress indicator, blue, 4 pcs, sequentially display 25%-50%-75%-100%, all lights up after finishing cloning;
3. A/B disk position light, yellow, represents disk A/B, lights up when the hard disk is inserted, and flashes when reading and writing.

Specifications

Compatibility: USB-C-port
USB Specification: USB 20Gbps
Hard Drive Version: PCIe/NVMe
Input Voltage: 100-240V 50/60 Hz
Output: DC 24W (12V/2A)
System Requirements: Windows 11 / 10 / 8 / 7; Mac OS 10.12 ≥

Package Content

• 1 x USB (20Gbps) Type C to Dual M.2 PCIe NVMe SSD
• Enclosure with Offline Clone
• 1 x USB-C to USB-C Data Cable (30cm)
• 1 x 12V/2A Power Adapter
• 2 x Aluminum Heat Sink
• 2 x Silicone Thermal Pad

Features

1. Aluminum alloy appearance texture high-grade, more suitable for business style.
2. Tool-free simple press and extract design, disassembly and installation are simple and easy.
3. With safety lock design, can lock the extraction to prevent misuse.
4. Support multi-size M.2 SSD specification compatibility (42mm/60mm/80mm).
5. USB 20Gbps transfer rate, fully utilizing the transfer performance.
6. Support PCIe Gen 3×2 NVME M.2 SSD.
7. Support for SSD TRIM commands and UASP acceleration.
8. Support dual-disk offline cloning, you can achieve A to B disk partition cloning.
9. Adopt Type-C interface, easy to use for connection, no need to distinguish between the front and back side.
10. Plug and play, no driver required, Support hot swap.
11. Built-in ultra-thin turbo cooling fan can form a convection air duct cooling design for the hard drive case.

How to Use

1. Install the Aluminum Heat Sink
2. Remove the surface layer of both Aluminum Heat Sink and Silicone Thermal Pad.
3. Stick the Silicone Thermal Pad in between the SSD and the Aluminum Heat Sink.
4. 42mm/60mm/80mm M.2 SSD Installation
5. Slide the lock of the product (shown in A).
6. Press the other side of the product to release the mainboard (shown in B).
7. Pull out the mainboard.
8. Insert the M.2 SSD diagonally down into the slot.
9. Gently press down on the M.2 SSD with your fingers and snap it into the plastic Snap-on case. You can adjust the plastic snap to install different size M.2 SDD if needed.
10. Press again to lock down the mainboard (shown in B) and slide the lock. (shown in A).

Offline Clone Operation

1. Long press the clone button on the product (about 3S), when you see the hard disk cloning progress indicator, after all lights up, release the clone button, the hard disk cloning will start (A disk to B disk) after the operation is successful.
2. Hard disk cloning progress indicator, which sequentially displays 25%-50%-75%-100%. After completion of hard disk cloning, all the hard disk cloning progress indicators are on, that is, the hard disk is cloned (disk A to disk B).
3. If you need to take out the SSD, please pull out the power first, and then take out the SSD.

Notice: Your disk might have bad sectors if the blue indicator keeps flashing. In that case, the bad sectors will be ignored in order to help you complete the clone unless the bad sectors lead the malfunction of your disk and the clone cannot be processed. We suggest you seek experts’ advice for the repair of your disk.

FAQ

Q: Why is the read/write speed slow in actual use?

A: Read and write speeds are slower suggest that you check the USB host port and, it will only have USB3.0/2.0 speeds if your USB port is 3.0/2.0 version.

Q: Why does Windows XP system not recognize hard drives with capacity over

2TB?

A: Due to the system limitations of Windows XP, the capacity of the hard disk that can be recognized on the system cannot exceed 2TB, and can only be supported by computers upgraded to Vista (64bit) or above. It is recommended to convert the disk to a GPT disk partition, otherwise the operating system will not support disk partitions that exceed 2TB.

Q: How can I protect my hard drive and data and achieve a secure exit?

A: When you want to remove the removable hard drive without closing the operating system, in order to protect your hard drive and data from damage, it is recommended that users will safely eject the USB device via the Safe Remove USB Peripheral icon in the bottom right corner of the system or click the disk icon (under Mac OS system) and select to eject the disk device and then power off to remove the device.

Note

1. When using this product and installing the M.2 SSD as an option, please be careful to prevent static electricity (it is recommended toplace your hands on metal objects to discharge).
2. This product uses the M Key interface, which is an NVMe protocol channel. When installing an M.2 SSD, please check the interface and protocol channel of the drive.
3. Although the USB side of the product supports hot-swapping, it must be done with power off when installing an M.2 SSD.
4. Products can reach 20Gbps in specific devices, with Thunderbolt
5. Thunderbolt 4 interface in Apple and Huawei laptops, it can not reach 20Gbps.
6. Try to move gently when inserting the PCBA board to avoid scratching the components on the motherboard.
7. When disassembling and assembling the hard drive case, please keep all the accessories properly to prevent loss.
8. When using the product, if you use the dual-disk cloning function or read two disks at the same time (when only connecting the product to a single disk, you may not connect the standard power adapter), it is recommended to connect the product’s power adapter to avoid the lack of power supply to prevent the normal reading of disks.
9. After use, if you need to remove the SSD, please unplug the power first and then remove the SSD.

Warranty

The Unitek USB (20Gbps) Type-C to Dual M.2 PCIe NVMe SSD Enclosure is covered by Unitek warranty for 12 months. If the product fails due to manufacturer defects, please contact us by email at: support_us@unitek- products.com

Symbols

Documents / Resources

| UNITEK S1206B USB 20Gbps Type-C to Dual M.2 PCIe NVMe SSD Enclosure [pdf] User Manual
S1206B USB 20Gbps Type-C to Dual M.2 PCIe NVMe SSD Enclosure, S1206B, USB 20Gbps Type-C to Dual M.2 PCIe NVMe SSD Enclosure, Type-C to Dual M.2 PCIe NVMe SSD Enclosure, Dual M.2 PCIe NVMe SSD Enclosure, PCIe NVMe SSD Enclosure, NVMe SSD Enclosure, SSD Enclosure, Enclosure
---|---

References

• products.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>