UNITEK Y-9324BGY USB C SD Card Reader User Manual
- June 15, 2024
- UNITEK
Table of Contents
UNITEK Y-9324BGY USB C SD Card Reader
Thank you for choosing Unitek USB 3.0 Type-C 3-in-1 Card Reader.
Please read the user manual carefully before use and save them.
If you need any help, please contact our professional customer service team
at: support_us@unitek-products.com
Product Diagram
Specification
Card Slot | SD/Micro SD/CF |
---|---|
Interface | USB C / Thunderbolt 3 / Type-C |
Simultaneous card reading quantity | 3 |
Transfer Speed | 5Gbps |
Material | Aluminum |
Package Contents
- 1x USB 3.0 Type-C 3-in-1 Card Reader
- 1x User Manual
FAQ
-
Q: Why the data transfer speed is slow?
A: Please make sure the host (computer side) is USB 3.0 as well. -
Q: Why there is no icon (of the memory card) appears on the screen after connecting?
A: Please insert the memory card to the card reader first, then connect the card reader to the computer. on the other hand, we recommend you to set the format of SD/CF/Micro SD to be exFAT or FAT. NTFS is not recommended as it will affect the usage of memory card. -
Q: Why I can’t read and write SD/CF/Micro SD card atfer connecting properly?
A: Please reconned with the method mentioned in Q2. Also, please remember to unlock the SD card. -
Q: How to format SD/CF/Micro SD card?
A: Note; In order to avoid data loss, please backup your data BEFORE formatting the memory card.
-
Windows
Click [Device Management] > [Disk Management], find the correct meory card, right click [Format], choose either exFAT or FAT then click [OK]. -
Mac OS
Eiher [Disk Management], choose the correct memory card, click [Erase], select the format and fill in the label (Disk Name), click on [Erade] to start format.
Note
- Please disconnect the card reader from the computer properly to avoid data loss. Click the Safely Remove Hardware icon in the notification area.
- Does not disconnect the card reader while transferring data.
Warranty
The Unitek USB 3.0 Type-C 3-in-1 Card Reader is covered by Unitek warranty for 24 months. If the product fails due to manufacturer defects, please contact us by email at: support_us@unitek-products.com