Qnect QN-IPC04 Wi-Fi Camera User Guide
- October 27, 2023
- qnect
Table of Contents
Qnect QN-IPC04 Wi-Fi Camera
Product Description
- Lens
- LED
- IR
- Speaker
- Micro USB port
- Reset
- Microphone
- Micro-SD card slot [32Gb]
- Temperature sensor
- Metal support
Technical Data
Frequency: Connects directly to your home Wi-Fi network 2.4GHz
Power supply: USB 5V DC 1000mA
Lens: FULL HD 1080P 100° viewing angle Night vision 5m
Features: Sound detection Motion detection Nightlight Temperature
detection
Audio: Full duplex two-way audio Lullaby song
Storage: Micro SD Storage (Max 32Gb) Cloud Storage option
Max. radio transmit power Antenna gain: 18.5 dBm
3 dBi
Resistance: IP20
Dimensions: 83 x 128 x 64 mm (Teddy) 67 x 67 x 58 (Camera)
Use
-
Just download the app “q-nect home” from the Apple app store or the Google Play store
-
Start the app.
-
If you’re using it for the first time, you’ll have to register and create a new account.
If you already have an account, log in using your login details. -
Click “+” in the upper-right corner in the app, and in the list select ‘Security > QN-IPC04’
Optional: Insert a memory card into the memory card slot -
Connect the camera to the included USB cable and the power supply unit. Plug the power supply unit into a socket.
-
Wait a moment until the camera emits a signal tone and the LED begins to flash red quickly.
-
If the camera does not make a “beep” sound, or the LED does not flash quickly: press the reset button for > 6s until your hear a beep sound.
-
If the camera makes a beep sound and the LED flashes quickly: Confirm in the app.
-
Confirm that the camera LED is flashing.
-
Now enter the name of your 2.4GHz WiFi network and the password, and confirm.
-
The camera will now be connected. Once the connection has been established, the LED stops flashing and emits a constant blue light.
-
Now you can set up, control and configure your WiFi camera using the app.
Note : The device name will also be used for push notifications. -
Install the device on your desired location
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- Do not expose the product to water or moisture
Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Warranty
Eltra nv assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Declaration of Conformity
- Eltra nv, Pachtgoedstraat 2, 9140 Temse, Belgium, hereby declares that the product comprising QN-IPC04- 416000010 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- The original declaration of conformity can be requested at info@eltra.be
Support
Detailed operating instructions are available at www.qnecthome.com
Pachtgoedstraat 2 B- 9140 Temse
www.qnecthome.co
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>