BRESSER BR-6RGB Mini Tube LED Pocket Light Tube with Built In Rechargeable Battery Instruction Manual

BRESSER BR-6RGB Mini Tube LED Pocket Light Tube with Built In

Rechargeable Battery

GENERAL WARNINGS

DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach of children and animals.
Never touch parts of the device during operation or before it has cooled down completely (approx. 45 min. after switching off)!
RISK OF GLARE!
Make sure that people and animals do not look into the light. The high luminosity can cause glare to the eyes and afterimag-es. This impairment of vision can lead to accidents.

RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device. The device could be knocked over.
The manufacturer accepts no liability for damage to property caused by improper or insufficiently safe installation!
Only use the recommended power supply unit or the recommended rechargeable batteries4 for the power supply!
The manufacturer accepts no liability for voltage damage caused by the use of an unsuitable power adapter!
To prevent decreasing the strength of the magnets, do not attach this device or the magnets to any surface hotter than 80C°.

DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power source (power adapter). Only use the device as described in the manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK. Never bend, squeeze or pull power cables, connecting cables, extensions or connectors. Protect cables from sharp edges and heat. Check this device, cables and connections for damage before use. Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.

FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and ensure that it is stored in a reasonably safe place.

• Keep children and animals away from the device! They could knock the device over.
• Make sure that no one can trip over connection cables. The device could be knocked over.
• Do not expose the device to high temperatures. Do not short-circuit the device or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
• Never cover the ventilation slots or cooling fins of the device during operation or until it has cooled down completely!
• Only use the recommended power supply unit or batteries

IMPORTANT NOTE

Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary. Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of opera-tion and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply. To disconnect the unit from the mains, always pull the mains plug and never pull the cable!
Do not subject the device to excessive vibrations.

PARTS LIST & DELIVERY CONTENT

DELIVERY CONTENT
A Mini light tube (1x), B Carrying bag (1x), C Mini tripod (1x), D USB cable (type A/C) (1x), E Wrist strap with ¼” thread (1x), F Metal mount plates (2x), G User Manual

PARTS LIST

1. ¼” screw hole
2. Magnet adsorption
3. Magnet
4. Display screen
5. Up Button
6. Down Button
7. Power Button
8. Mode Button
9. Type-C charge port
10. LED Pannel

CHARGING
To charge the device, please use the USB cable and plug it into the Type-C charge port (3). Then plug the other end of
the cable wiith the USB-A plug into a 5V power adapter (not included) to connect it with a power socket.

POWER SUPPLY
Note:
This device is powered by the built-in rechargeable battery. Before commissioning, make sure that it is fully loaded. Only use the main cable supplied for charging!
Press Power/Function button to power on the device.

INSTRUCTIONS

Power off/Mode Switch

• Long press to turn on the light
• Short press to switch light mode
  (CCT Mode, RGB Mode, HSI Mode, Effect Mode)

Display Zone

Press the buttons to adjust the Colour Temperature Range:
2500-9000K.
Press the buttons to adjust the brightness Range: 0-100%.

Press the buttons to adjust the HUE RGB Range: 0-360°.
Press the buttons to adjust the brightness Range: 0-100%.

Press the buttons to shift effects (20 effects).
Press the buttons to adjust the brightness Range: 0-100%.

Effect Modes

PRODUCT SPECIFICATION

Beads

| White 33PCS
Yellow 33PCS
RGB 22PCS
CRI| 95+
Voltage| 3.7V
Battery Capacity| 2000mAh
Illuminance| 700LUX/0.3m
Color Temperature| 2500-9000K
Work Time| Strongest Brightness > 2h
Weakest Brightness > 15h
Power| 6W
Charge Port| Type-C
Beam Angle| 120°
Charging Time| 2.5h

Note:
The data of the light is on the base of average. Slight difference shall exist among different lights.

DISPOSAL

Dispose of the packaging materials by type. Contact your local waste-disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! According to the European Directive 2002/96/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.
Observe the current legal regulations when disposing of the de-vice! Information on proper disposal can be obtained from munici-pal waste disposal service providers or the Environmental Agency.

CLEANING
Before cleaning the device, disconnect it from the power supply (remove plug or remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. Protect the device from dust and moisture. Store it in the sup-plied bag or transportation packaging. The batteries should be removed from the unit if it has not been used for a long time.

EC DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the
applicable directives and corresponding standards has been prepared by Bresser GmbH. This can be viewed at any time upon request at
www.bresser.de/download/F004612/CE/F004612_CE.pdf

UKCA DECLARATION OF CONFORMITY

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. This can be viewed at any time upon request at
www.bresser.de/download/F004612/UKCA/F004612_UKCA.pdf

WARRANTY
The regular warranty period is 2 years and begins on the day of purchase. You can consult the full warranty terms as well as information on extending the warranty period and details of our services at www.bresser.de/warranty_terms.

References

• Bresser | BRESSER BR-6 RGB Mini Tube | Expand Your Horizon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>