UNITEK D1099A Steam Deck Dock User Manual
- June 15, 2024
- UNITEK
Table of Contents
- Product Diagram
- Specification
- Package Contents
- Compatible Devices
- How to Use
- FAQ
- Q: What is the resolution of HDMI output?
- Q: Can my steam deck be charged while playing?
- Q: Does this steam deck docking station come with ac adapter?
- Q: Why the pixels of the screen cannot reach 4K@60Hz?
- Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UNITEK D1099A Steam Deck Dock User Manual
Thank you for choosing Unitek TV Dock Station for Steam Deck. Please read the
user manual carefully before use and save them.
If you need any help, please contact our professional customer service team
:support_us@unitek-products.com.
Product Diagram
A: Type-C Port (Connecting the steam deck)
B: Gigabit Ethernet Port (1000M), downward compatible with 100M/10M.
C: HDMI 2.0 (Supports up to 4K@60Hz)
D: Power LED Indicator
E: Type-C PD Power Input / Up to 100W
F: 3*USB 3.0 Ports (connecting with some game peripherals such as wired
controllers, keyboards, mouses, steering wheel, hard disk, etc.)
Specification
- Product Port: 1RJ45 Ethernet+1HDMI 2.0+ 1Type-C Power Input+3USB 3.0
- Length of Cord: 7.1 inch
- Product Dimension: 1477540mm / 5.792.951.57 inch
- Product Weight: 112g / 0.25lb
Package Contents
- 1 x Steam Deck Dock
- 1 x User Manual
Compatible Devices
for Steam deck for Nintendo switch/switch oled for tablet
How to Use
- Connect HDMI port to the TV/monitor.
- Turn on your steam deck and dock it onto the docking station, then plug Type-C port into steam deck.
- Connect a adapter at Type-C PD power input, and original adapter is highly recommend.
- You will see your game projected on TV and your console will begin charging, some times it will take 5-10 seconds for the screen to show up on the TV.
- When it is necessary to connect the wired network, insert the network cable directly into RJ45 ethernet port.
Note
- If screen is not switched to TV successfully, please turn off the Steam Deck and remove all cables for 1 minute, then turn it on and try again.
- If other peripherals connecting is needed when playing games on the relayed screen, it is recommended to use a power adapter over 65W.
- When the power of steam deck host is less than 10%, it does not support screen projection.
- When it is used for the Nintendo Switch, the Type-C port shall be placed on the base upward, and please use the original switch power adapter.
- Please unplug the power adapter when the product is not in use.
- The product cannot be used and stored in humid environment, and it should be used or stored in the place without dust and heavy load, so as to protect its service life.
- Please stop using the product in case that water immersion, crashing damage or breakage caused by improper use bring about electrical problems.
- Keep this product away from children
FAQ
Q: What is the resolution of HDMI output?
A: It is HDMI 2.0 version, supports HDCP 1.4 and up to 4K@60Hz.
Q: Can my steam deck be charged while playing?
A: Yes, of course. Steam deck can be charged while playing via the docking station.
Q: Does this steam deck docking station come with ac adapter?
A: No, it doesn’t. You can use original power adapter.
Q: Why the pixels of the screen cannot reach 4K@60Hz?
A: Please make sure your HDMI cable is also at the resolution needed to support that and refresh rate, older HDMI spec cables will not be able to reach required output. Then make sure your TV/monitor can also support 4K@60Hz output. Both of them need meet spec simultaneously
Warranty
The Unitek TV Dock Station for Steam Deck is covered by Unitek warranty for 24 months. lf the product fails due to manufacturer defects, please contact us by email at support_us@unitek-products.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>