Zetronix zAtom-PRO DIY Hidden Camera User Manual
- June 1, 2024
- Zetronix
Table of Contents
Zetronix zAtom-PRO DIY Hidden Camera
DIAGRAM
- Main Board
- Camera
- Battery
- Light Indicator
- MicroSD card Slot
- USB charge port
- Mic
- Video Out
- PIR Sensor
- IR Sensor
Charging
Please ensure you have a full charge before using the Atom.
Connect the battery ③ to the mainboard ① and connect the mainboard’s USB
charge port ⑥ to a USB charger.
Storage
Please install a MicroSD memory card before recording any media. Insert a MicroSD card into the slot ⑤ by pushing it in as far as it will go until you feel it click in place. Push it in again to remove it so it toggles back out.
Power ON/OFF
Hit the power button on the remote to turn the camera device on the Atom on or off. When turning it on, the red and green light will flash and the camera device will go into motion activated recording mode by default. To pause recording hit record button on the remote.
OPERATION
Recording Modes
The Atom has 3 modes or operation; Motion Activated, Continuous Recording and PIR Motion Recording. Before changing its recording mode, please ensure the camera is on standby (solid green light ④) where video is not currently being recorded. To pause any recording, press the video record ⑭ button at any time.
Continuous Recording
Press the video record button ⑭ to start recoding. The green light will flash 3 times and go out indicating recording has started. Pause the recording by pressing the video record button ⑭ again.
Motion Activated Record
Press the motion detect button ⑬ to go into motion activated mode. Anytime there’s a change in the video image video will start recording. The indicator light will flash 3 times and go out. Hitting the motion detect button ⑬ again will stop the recording putting the camera device back into stand by mode indicated by a solid green light ④. When recording is triggered by motion, the camera will record for one minute before it stops.
PIR Motion Video Recording
Hit the PIT motion detect button ⑮ to go into PIR motion activated mode. Video
will recording anytime there’s motion in front of the PIR sensor ⑨. The light
will blink 3 times and go out. Hitting the PIR motion detect button ⑮ again
will stop the recording putting the camera back into stand by mode indicated
by a solid green light ④.
When recording is triggered by motion, the camera will record for at least a
minute before it stops going back to standby.
Taking Photos
Ensure the camera is on standby with a solid green light ④, then press the photo button ⑫ to snap a picture. The light ④ will flash once indicating the picture was saved.
ADVANCED SETUP
Date/Time Stamp
To change or remove the date-time imprinted on the video or photos, please use the zUtility App software that can be downloaded from our website. Once installed, choose Atom-PRO from the items menu and follow the instructions in the app.
https://www.zetronix.com/download
Media Playback
To view the recorded media, you can connect the Atom directly to your computer’s USB port using a USB cable connected to the mini USB port ④, or use a MicroSD card adapter to connect the MicroSD memory card directly to the computer. Your computer should automatically prompt you to review the media or browse the files.
To playback the videos we recommend using VLC player which can be downloaded for free: http://videolan.org
Troubleshooting
If the Atom stops responding, first check that the battery is charged, the remote battery is good, and the memory card is not full.
Most issues can be solved by resetting the Atom, or formatting the MicroSD card in your computer.
To reset the Atom press and hold the reset button ⑥ for 5 seconds, the Atom should power off. Then try operating it as usual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>