SIEMENS LR96CAQ20 Ceiling-Mounted Ventilation System User Manual

Ceiling-mounted ventilation system
**LR96CAQ20, LR96CAQ50, LR96CAQ50B
User manual and installation instructions

**Register your product on My Siemens and discover exclusive services and offers.
siemens-home.bsh-group.com/welcome
The future moving in.

Safety

Please read the safety information to ensure that you use the appliance safely.

1.1 General information
You can find general information about this instruction manual here.

• Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently.
• Follow the safety instructions and warnings.
• Keep the instruction manual and the product information safe for future reference or for the next owner.
• Check the appliance after unpacking it. Do not connect the appliance if it has been damaged in transit.

1.2 Intended use
Read the information on intended use to ensure that you use the appliance correctly and safely. This appliance is designed only to be built into kitchen units. Read the special installation instructions.
The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location. Only use this appliance:

• For extracting cooking vapor.

• In private households and in enclosed spaces in a domestic environment.

• Up to an altitude of max. 2000 m above sea level.
  Do not use the appliance:

• With an external timer.

1.3 Restriction on user group
Avoid risks to children and vulnerable persons.
This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Children must not play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised.
Keep children under the age of 8 years away from the appliance and power cable.

1.4 Safe use
Follow these safety instructions when using the appliance.
WARNING  ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material.

WARNING ‒ Risk of poisoning!
Risk of poisoning from flue gases being drawn back in. Room-air-dependent heat-producing appliances (e.g. gas, oil, wood or cooperated heaters, continuous flow heaters, or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, the air is extracted from the kitchen and the adjacent rooms. Without an adequate supply of air, the air pressure falls below atmospheric pressure. Toxic gases from the flue or the extraction shaft are sucked back into the living space.

▶ Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as a room air-dependent heat- producing appliance is being operated.
▶ It is only possible to safely operate the appliance if the pressure in the room in which the heating appliance is installed does not drop more than 4 Pa (0.04 mbar) below atmospheric pressure. This can be achieved whenever the air needed for combustion is able to enter through openings that cannot be sealed, for example in doors, windows, in conjunction with incoming/exhaust air wall boxes, or by other technical means. An incoming/exhaust air wall box alone does not ensure compliance with the limit.
▶ In any case, consult your responsible chimney sweep. They are able to assess the house’s entire ventilation setup and will suggest suitable ventilation measures to you.
▶ Unrestricted operation is possible if the appliance is operated exclusively in air-recirculation mode.

WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶ Never operate the appliance without a grease filter.
▶ Clean the grease filters regularly.
▶ Never work with naked flames close to the appliance (e.g. flambéing).
▶ Do not install the appliance near a solid fuel heating appliance (e.g. wood- or coal-burning) unless the heating appliance has a sealed, non-removable cover. There must be no flying sparks. Hot oil or grease ignites very quickly.
▶ Always supervise hot oil and fat.
▶ Never extinguish burning oil or fat with water. Switch off the cooking zone. Extinguish flames carefully using a lid, fire blanket, or something similar. When gas burners are in operation without any cookware placed on them, they can build up a lot of heat. A ventilation appliance installed above the cooker may become damaged or catch fire.
▶ Only operate the gas burners with cookware on them. Gas burners can build up a lot of heat while operating. A ventilation appliance installed above the cooker may become damaged or catch fire.
▶ Only operate the gas burners with cookware on them.
▶ Set at least fan setting 3.
▶ Never operate large burners of more than 5  kW with the highest flame for longer than 15 minutes, e.g. a wok.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot during operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance. The appliance will become hot during operation.
▶ Allow the appliance to cool down before cleaning it.
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
▶ Carefully clean the appliance interior. Items placed on the appliance may fall off.
▶ Do not place any objects on the appliance.

Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.
▶ Do not make any changes to the electrical or mechanical assembly.
The filter cover may swing-out.
▶ Open the filter cover slowly.
▶ Take hold of the filter cover after opening until it no longer swings out.
▶ Close the filter cover slowly.
Risk of injury when opening and closing the hinges.
▶ Keep your hands away from the hinges.
The light emitted by LED lights is very dazzling and can damage the eyes (risk group 1).
▶ Do not look directly into the switched-on
LED lights for longer than 100 seconds.
Children may swallow batteries.
▶ Keep batteries out of the reach of children.
▶ Keep an eye on any children when you are replacing batteries.
Batteries may explode.
▶ Do not charge the batteries.
▶ Do not short-circuit the batteries.
▶ Do not throw batteries into a fire.
Risk of falling when working on the appliance

▶ Use a stable stepladder.
▶ Do not lean over the hob.
▶ Do not step on the hob or the work surface.
It may create an increased risk of injury if the appliance is operated by another person via the Home Connect app during cleaning.
▶ Before cleaning, disconnect the appliance from the Home Connect app.

WARNING ‒ Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
▶ Call Customer Service. → Page 14
▶ Repairs to the appliance should only be carried out by trained specialist staff. Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by trained specialist staff. Ingress of moisture can cause an electric shock.
▶ Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the interior of the appliance may cause explosions.
▶ Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminum parts,
e.g. grease filter on extractor hoods.

Preventing material damage

2.1 Avoiding material damage
ATTENTION!
Condensate may cause corrosion damage.
▶ To prevent condensation from building up, switch on the appliance during cooking.

If moisture gets into the controls, this may result in damage.
▶ Never clean controls with a wet cloth.
Incorrect cleaning damages the surfaces.
▶ Follow the cleaning instructions.
▶ Do not use harsh or abrasive detergents.
▶ Clean stainless steel surfaces in the direction of the finish only.
▶ Never clean controls with stainless steel cleaners.
Condensation that flows back in may damage the appliance.
▶ The air extraction duct must be installed with a gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they may break off.
▶ Do not pull design elements.
▶ Do not place objects on the design elements or hang objects from them. Leaking batteries may damage the remote control.
▶ Remove the batteries if you are not using the remote control.
▶ Safely dispose of empty or defective batteries in an environmentally friendly manner. There is a risk of surface damage if you do not peel off the protective film.
▶ Remove the protective film from all parts of the appliance before using it for the first time.

Environmental protection and saving energy

Help protect the environment by using your appliance in a way that conserves resources and by disposing of reusable materials properly.

3.1 Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶ Sort the individual components by type and dispose of them separately.
Information about current disposal methods is available from your specialist dealer or local authority.

3.2 Saving energy
If you follow these instructions, your appliance will use less power.
Ensure that there is sufficient ventilation when cooking.

• The appliance works more efficiently and with fewer operating noises.

• Adjust the fan speed to the amount of steam produced during
  cooking.

• The lower the fan speed, the less energy is consumed.
  Only use intensive mode when required.
  If cooking produces large amounts of steam, select a higher fan speed in good time.

• The odors are distributed around the room less.
  Switch the appliance off when you are not using it.

• The appliance does not consume any energy.
  Switch off the lighting if you no longer require it.

• The lighting does not consume any energy.
  Clean or replace the filters at regular intervals.

• The effectiveness of the filter is retained. Put the cooking lid on.

• The cooking vapors and condensation are reduced.

Operating modes

4.1 Air extraction mode
The air which is drawn in is cleaned by the grease filters and conveyed to the exterior by a pipe system.
The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room).

• If the exhaust air is to be conveyed into a non-functioning smoke or exhaust gas flue, you must obtain the consent of the heating engineer responsible.
• If the exhaust air is conveyed through the external wall, a telescopic duct should be used.

4.2 Air recirculation mode
The air which is drawn in is cleaned by the grease filters and an odor filter and conveyed back into the room.

To bind odors in circulating-air mode, you must install an odor filter. The different options for operating the appliance in circulating-air mode can be found in our catalog.  Alternatively, ask your dealer. The required accessories are available from specialist retailers, from customer service, or from the Online Shop.

Familiarising yourself with your appliance

5.1 Controls
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
Tip: Align the remote control as precisely as possible to the infrared receiver for the LED display.

| Switch the appliance on or off
---|---
| Switching automatic mode1 on or off
| Increase the fan setting
| Decrease the fan setting
| Switch the lighting on or off
| Reduce the brightness
| Increase the brightness
Depending on the appliance specifications
| Switch the fan run-on on or off
| Home Connect
| Reset the filter saturation indicator
Depending on the appliance specifications

5.2 LED display
Die LED-Anzeige zeigt eingestellte Werte und Funktionen.

1 Depending on the appliance specifications

  Accessories

You can buy accessories from the after-sales service,  from specialist retailers, or online. Only use original accessories, as these have been specifically designed for your appliance.
Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. → Page 14 You can find out which accessories are available for your appliance in our catalog, in the online shop, or from our after-sales service. www.siemens- home.bsh-group.com

Before using it for the first time

Configure the settings for the initial start-up. Clean the appliance and accessories.
7.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
To use it in circulating-air mode, you must set the operating mode.
Note: For use in circulating-air mode, you require additional Accessories.
Requirement: The appliance is switched off.

1.  Press and hold and for approx. three seconds.
   ‒ To set circulating-air mode (non-regenerable filter), press / until LED 2 lights up in the LED display.
   ‒ To set circulating-air mode (non-regenerable filter), press / until LED 3 lights up in the LED display.
   ‒ To convert the electronic control back to operation without the air recirculation filter, press / until LED 1 lights up on the LED display.

2. To save the setting, press and hold for and approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically.
   To cancel the setting, press .
   ****A signal tone sounds as soon as the selected setting is saved.

Basic operation

8.1 Switching on the appliance

Requirement: Align the remote control as precisely as possible to the infrared receiver for the LED display.
▶ Press  to switch on the appliance.
The appliance starts at fan setting 2.
The LED for the set fan setting lights up in the LED display.

8.2 Switching off the appliance
Switch the appliance off when you are not using it.
▶ Press to switch the appliance off.
**** The appliance switches off. Any functions currently in progress are canceled.

8.3 Selecting a fan setting
▶ Press or .
The LED for the set fan setting lights up in the LED display.
8.4 Switching to the intensive mode
If particularly strong odors or vapors develop, you can use intensive mode.

1. so oft drücken, bis in der LED-Anzeige die LED 4 für die Intensivstufe 1 leuchtet.
2. so oft drücken, bis in der LED-Anzeige die LED 5 für die Intensivstufe 2 leuchtet.
   ****After approx. 6 minutes, the appliance automatically switches to fan setting 3.

8.5 Switching off intensive mode
▶ To select a fan setting of your choice, press .
8.6 Switching on the fan run-on
▶ Press .

1 Depending on the appliance specifications

LED 1 for the fan setting lights up in the LED display. LED 6 flashes for the fan run-on.
The appliance switches off automatically after approx. 10 minutes.

8.7 Switching off the fan run-on
▶ Press .
This immediately stops the fan run-on.
The appliance switches to the fan setting that was previously selected.

8.8 Switch on automatic mode
The optimum fan setting is set automatically using a sensor.
▶ Press .
**** In the LED display, LED 6 lights up for automatic mode.

8.9 Switch off automatic mode
▶ Press .
The appliance switches to the fan setting that was previously set.
The ventilation is automatically ended when the sensor detects no further change in the room air quality.
****an Automatic mode runs for a maximum of four hours.

8.10 Intermittent ventilation
With interval ventilation, the ventilation system switches on and off in the selected setting for the selected time.
Note: This function is only available via a mobile device
with the Home Connect app.
If the interval ventilation is switched on, LED 6 continuously flashes in the LED display for the interval ventilation and the LED for the selected fan setting lights up.

As soon as the ventilation time ends, the LED for the fan setting you have selected goes out. LED 6 continues to flash.

8.11 Sensor control
In automatic mode, a sensor in the appliance detects the intensity of the cooking and roasting fumes. Depending on the setting of the sensor sensitivity, the optimum fan setting is automatically switched on.
If the sensor control system reacts too weakly or too strongly, the setting for the sensor sensitivity may change.

• Default setting: Fan setting 3
• Lowest setting: Fan setting 1
• Highest setting: Fan setting 5

8.12 Setting the sensor control
Requirement: The appliance is switched off.
1. Press and hold and for approx. 3 seconds.
2. Press to change the setting. To cancel the setting, press or .
3. To save the setting, press, and hold , and for approx. 3 seconds.
Or wait approx. 10 seconds until the setting is saved automatically.
**** A signal tone sounds as soon as the selected setting is saved.

8.13 Setting the saturation indicator

The saturation indicator must be adjusted depending on the filter used.
Requirement: The appliance is switched off.

1. Press and hold and for approx. three seconds.
   ‒ To set circulating-air mode (non-regenerable filter), press until LED 2 lights up in the LED display.
   ‒ To set circulating-air mode (non-regenerable filter), press / until LED 3 lights up in the LED display.
   ‒ To convert the electronic control back to operation without the air recirculation filter, press / until LED 1 lights up on the LED display.

2. To save the setting, press and hold for approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically.
   To cancel the setting, press .
   ****A signal tone sounds as soon as the selected setting is saved.

8.14 Resetting the saturation indicator
After cleaning the grease filter or after changing the odor filter, the saturation indicator can be reset.
Requirements

• After the appliance has been switched off, LED 1flashes in the LED display for the grease filter saturation display, and/or LED 2 flashes for the saturation indicator for the odor filter.
• A repeated signal tone sounds.

1 Depending on the appliance specifications

▶ Press .
** The saturation indicator is reset.
8.15 Switching on the lighting**

▶ Press to switch on the lighting.
Note: Colour temperature settings are available in the Home Connect app provided the appliance has this function.

8.17 Switching on the button tone
The button tones can be switched on.
Requirement:  The appliance is switched off.

1. Press and hold and for approx. three seconds.
   **** In the LED display, the LED for the setting that is currently selected lights up.

2. Press until LED 1 lights up in the LED display.
   To cancel the setting, press or .

3. To save the setting, press and hold for approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically. and
   ****A signal tone sounds as soon as the selected setting is saved.

8.18 Switching the button tone off
The button tones can be switched off.
Note: Signal tones for the appliance are always switched on and cannot be switched off.

Requirement: The appliance is switched off.

1. Press and hold and for approx. three seconds.
   In the LED display, the LED for the setting that is currently selected lights up.

2. Press  or  until LED 2 lights up in the LED display.
   To cancel the setting, press .

3. To save the setting, press and hold , and for approx. three seconds.
   Or wait approx. 10 seconds until the setting is saved automatically.
   A signal tone sounds as soon as the selected setting is saved.

Home Connect

This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status.
Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home- connect.com.
To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi ) and to the Home Connect app.

• Automatically connecting appliance to WLAN home network (Wi-Fi) → Page 9
• Connecting the appliance to the WLAN home network (WiFi) manually → Page 9 The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. If the appliance is not connected to your home network, it functions as an appliance with no network connection and can still be operated via the display. 1

Tips

•  Please consult the documents supplied by Home Connect.
• Please also follow the instructions in the Home Connect app.

Notes

• Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app.
  →  Safety”, Page 2

• Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app.

• In networked standby mode, the appliance requires a maximum of 2 W.

• If you need your device’s MAC address to connect to your home network, you can find this next to the rating plate. → Page 14

9.1 Automatically connecting the appliance to the WLAN home network (Wi- Fi)
If your router has a WPS function, you can connect the appliance to your WLAN home network (Wi-Fi) automatically.
Note: The appliance cannot be switched on during the connection process. Press to cancel the process.

Requirements

• Wi-Fi on the router is activated.
• The appliance receives signals from the WLAN home network (Wi-Fi) at its installation location.
• The Home Connect app is installed on your mobile device.
• The appliance and the light are switched off.

1 Wi-Fi is a registered trademark of the Wi-Fi Alliance.

1. Press and hold the button until LED 7 flashes in the LED display.

2.  Press
   **** LED 1 and LED 7 flash in the LED display.

3. Press the WPS button on the router within the next 2 minutes.
   **** If the connection has been established, the appliance automatically connects to the Home Connect app. LED 3 and LED 7 flash in the LED display.

4. If no connection can be established, the appliance automatically switches to the manual connection to the home network, LED 2 and LED 7 flash in the LED display. Log the appliance manually into the home network or press in order to restart the login.

5. On your mobile device, follow the instructions for automatic network login.
   **** The login process is complete when LED 7 stops flashing and remains continuously lit.

9.2 Manually connecting the appliance to the WLAN home network (Wi-Fi)
Note: The appliance cannot be switched on during the connection process. Press to cancel the process.

Requirement : The appliance and the light are switched off.

1. Press and hold the button until LED 7 flashes in the LED display.

2. Press twice to start logging into your home network manually.
   **** LED 2 and LED 7 flash in the LED display.

3. Follow the instructions in the app.
   **** If the connection has been established, the appliance automatically connects to the Home Connect app. LED 3 and LED 7 light up in the LED display.

4. On your mobile device, follow the instructions for manually logging into your network.
   **** The login process is complete when LED 7 stops flashing and remains continuously lit.

9.3 Connecting the appliance to the Home Connect app
Requirements

• The Home Connect app is installed on your mobile device.
• The Home Connect app is opened.

1. Press and hold the button until LED 3 and LED 7 flash in the LED display.
2. Follow the instructions for the Home Connect app on the mobile device.
   **** The login process is complete when LED 7 stops flashing and remains continuously lit.

9.4 Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimization, troubleshooting, or security updates.
To do this, you must be a registered Home Connect user, have installed the app on your mobile device, and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded,  you can start installing it via the Home Connect app if you are in your local area network. The Home Connect app will inform you once the installation is successful.

Notes

• You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically.
• We recommend that you install security updates as soon as possible.

9.5 Resetting the connection
Saved connections to the home network and to Home Connect can be reset.
▶ Press and hold and until LED 7 goes out in the LED display.
**** An audible signal sounds.

10  Hob-based hood control
You can connect your appliance to a suitable hob and, in this way, control the functions of your appliance via the hob.
You have the following options for connecting the appliances with each other:

• Connecting the appliance via the Home Connect app. If both appliances are Home Connect-compatible, they can be connected using the Home Connect app. Follow the instructions in the app.
• Connecting appliances directly with each other.
• Connecting appliances via the Wi-Fi home network.
  Note: Please note the safety precautions in the instruction manual for your appliance and ensure that they are also observed when operating the appliance via the hob-based hood control.
  Tip: Operating your appliance always takes priority. It is not possible to use the hood controls on the hob during this time.

10.1 Connecting directly
Requirements

• Your appliance is now switched off.
• Before connecting the appliances, reset all connections to your home network or other appliances.
  If your appliance is connected directly to the hob, it cannot be connected to your home network as well and you will not be able to use Home Connect.

1.   Note: Refer to the section entitled “Hob-based hood control” in the instruction manual for your hob. Switch on the hob and select the search mode.
2. Press and hold the  button until the LED for Home Connect flashes in the LED display.
   The appliance is connected to the hob if the LED for Home Connect no longer flashes and lights up permanently.

10.2 Connecting via your home network

1. Follow the instructions in
   → “Automatically connecting the appliance to the WLAN home network (Wi-Fi)”, Page 9 or
   → “Manually connecting the appliance to the WLAN home network (Wi-Fi)”, Page

3. As soon as the appliance is connected to the home network, establish the connection to the hob via the Home Connect app.

4. Follow the instructions on your mobile device.

Cleaning and servicing

To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
11.1 Cleaning products
You can obtain suitable cleaning products from the aftersales service or the online shop.
WARNING  ‒ Risk of electric shock!
Ingress of moisture can cause an electric shock.
▶ Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶ Allow the appliance to cool down before cleaning.
ATTENTION!
Unsuitable cleaning products may damage the surfaces of the appliance.
▶ Do not use harsh or abrasive detergents.
▶ Do not use cleaning products with high alcohol content.
▶ Do not use hard scouring pads or cleaning sponges.
▶ Do not use any special cleaners for cleaning the appliance while it is hot.
▶ Only use glass cleaners, glass scrapers, or stainless steel care products if recommended in the cleaning instructions for the relevant part.
▶ Wash sponge cloths thoroughly before use.

11.2 Cleaning the appliance
Clean the appliance as specified. This will ensure that the different parts and surfaces of the appliance are not damaged by incorrect cleaning or unsuitable cleaning products.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminum parts in the interior of the appliance may cause explosions.
▶ Never use highly caustic alkaline or highly acidic cleaning agents. In particular, do not use commercial or industrial cleaning agents in conjunction with aluminum parts, e.g. grease filter on extractor hoods.

WARNING ‒ Risk of electric shock!
Ingress of moisture can cause an electric shock.
▶ Before cleaning, pull out the mains plug or switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure cleaners to clean the appliance.

WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶ Allow the appliance to cool down before cleaning.
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
▶ Carefully clean the appliance interior.

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 11

2. Clean as follows, depending on the surface:
   ‒ Clean stainless steel surfaces in the direction of the finish using a sponge cloth and hot soapy water.
   ‒ Clean painted surfaces using a damp sponge cloth and hot soapy water.
   ‒ Clean aluminum using a soft cloth and glass cleaner.
   ‒ Clean plastic using a soft cloth and glass cleaner.
   ‒ Clean glass using a soft cloth and glass cleaner.

3. Dry with a soft cloth.

4. Apply a thin layer of the stainless steel cleaning product to stainless steel surfaces using a soft cloth.
   You can obtain stainless steel cleaning products from the after-sales service or the online shop.

11.3 Cleaning the stainless steel surfaces

1.  Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 11

2. Clean using a sponge cloth and hot soapy water in the direction of the finish.

3. Dry with a soft cloth.

4. Apply a thin layer of the stainless steel cleaning product with a soft cloth.
   Tip: You can obtain stainless steel cleaning products from after-sales service or the online shop.

11.4 Cleaning controls
WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.
▶ Do not use wet sponge cloths.

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 11

2. Clean using a damp sponge cloth and hot soapy water.

3. Dry with a soft cloth.

11.5 Removing the grease filter
WARNING ‒ Risk of injury!
The filter cover may swing-out.
▶ Open the filter cover slowly.
▶ Take hold of the filter cover after opening until it no longer swings out.
▶ Close the filter cover slowly.
Risk of falling when working on the appliance

▶ Use a stable stepladder.
▶ Do not lean over the hob.
▶ Do not step on the hob or the work surface.

1. Press the lock on the filter cover.
   To prevent the filter cover from swinging down suddenly, hold onto the filter cover firmly with two hands.

2. Open the filter cover by pulling it downwards.

3. ATTENTION!
   Falling grease filters may damage the hob below.
   ▶ Grip below the grease filter with one hand.
   Open the locks on the grease filters.

4. Remove the grease filters from the holders.
   To prevent grease from dripping, hold the grease filter horizontally.

11.6 Cleaning grease filters in the dishwasher
The grease filters filter the grease from the cooking vapor. Regularly cleaned grease filters guarantee a high level of grease removal.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶ Clean the grease filters regularly.
ATTENTION!
The grease filters may become damaged if they are squeezed.
▶ Do not squeeze the grease filters.

Note: When cleaning the grease filter in the dishwasher, slight discoloration may occur. This discoloration has no effect on the performance of the metal grease filters.
Requirement: The grease filters have been removed.
→ “Removing the grease filter”, Page 12

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 11

2. Place the grease filters loosely into the dishwasher.
   Do not clean heavily soiled grease filters with utensils.
   Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop.

3. Start the dishwasher.
   Select a temperature of no more than 70 °C.

4. Allow the grease filters to drain.

11.7 Cleaning grease filters manually
The grease filters filter the grease from the cooking vapor. Regularly cleaned grease filters guarantee a high level of grease removal.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
▶ Clean the grease filters regularly.

Requirement:  The grease filters have been removed.
→ “Removing the grease filter”, Page 12

1. Observe the information regarding the cleaning agents.
   → “Cleaning products”, Page 11

2. Soak the grease filter in hot soapy water.
   Use special grease solvent for stubborn dirt. You can obtain grease solvents from after-sales service or the online shop.

3. Use a brush to clean the grease filters.

4. Rinse the grease filters thoroughly.

5. Allow the grease filters to drain.

11.8 Fitting grease filter s
ATTENTION!
Falling grease filters may damage the hob below.
▶ Grip below the grease filter with one hand.

1. Fit the grease filters.
2. Fold the grease filters upwards and engage the locks.
3. Make sure that the locks engage.
4.  Close the filter cover.
5. Make sure that the filter cover locks engage correctly.

11.9 Replacing the batteries in the remote control
WARNING ‒ Risk of injury!
Children may swallow batteries.
▶ Keep batteries out of the reach of children.
▶ Keep an eye on any children when you are replacing batteries.
Batteries may explode.
▶ Do not charge the batteries.
▶ Do not short-circuit the batteries.
▶ Do not throw batteries into a fire.
ATTENTION!
Improper handling of batteries.
▶ Do not short-circuit the terminals.
▶ Only use the specified type of batteries.
▶ Do not use different battery types together.
▶ Do not use new and used batteries together.
▶ Do not use rechargeable batteries.
Leaking batteries may damage the remote control.
▶ Remove the batteries if you are not using the remote control.
▶ Safely dispose of empty or defective batteries in an environmentally friendly manner.

1. Remove the cover.
2. Remove the empty batteries.
3.  Insert the new batteries (3 V CR 2032).
4. Close the cover.
5. Dispose of the empty batteries in an environmentally friendly manner.

Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting the aftersales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ If the appliance is defective, call Customer Service.

WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.

12.1 Malfunctions

▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your kitchen or other appliances is working.
The lighting does not work.| Different causes are possible.
▶ Call the after-sales service.
→ “Customer Service”, Page 14
▶ Defective LED lights may be replaced by the manufacturer, their customer service, or a qualified technician (electrician) only.
The remote control not working.| The batteries are flat.
▶ → “Replacing the batteries in the remote control”, Page 13
In the LED display, the LEDs flash one to five times after the appliance is switched off.| The batteries are almost empty.
▶ → “Replacing the batteries in the remote control”, Page 13
LED 1 flash in the LED display.| The grease filters are saturated.
▶ → “Cleaning grease filters in the dishwasher”, Page 12
▶ → “Cleaning grease filters manually”, Page 12
LED 2 flashes in the LED display.| The odor filters are saturated.
▶ Change the odor filter.
HomeConnect is not working correctly.| Different causes are possible.
▶ Go to www.home-connect.com.

Customer Service

If you have any queries on use, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area.
Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge.
Detailed information on the warranty period and terms of the warranty in your country is available from our aftersales service, your retailer, or on our website.
If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance.
The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
This product contains light sources from energy efficiency class G. These light sources are available as a spare part and should only be replaced by trained specialist staff.

13.1 Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate.
Depending on the model, the rating plate can be found:

• Inside the appliance (remove grease filters for access).
• On top of the appliance.
  Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Disposal

Find out here how to dispose of old appliances correctly.

14.1 Disposing of old appliances
Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally friendly manner.

This appliance is labeled in accordance with the European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment –  WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

14.2 Disposing of batteries
Batteries should be recycled in an environmentally friendly manner. Do not dispose of the batteries in the household rubbish.
▶ Dispose of batteries in an environmentally friendly manner.
Only for EU countries:

According to the European Guideline 2006/66/EC, defective or used battery packs/batteries must be collected separately and disposed of in an environmentally correct manner.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the basic requirements and other relevant provisions of Directive
2014/53/EU.
A detailed RED Declaration of Conformity can be found online at www.siemens- home.bsh-group.com among the additional documents on the product page for your appliance.

Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements. A detailed Declaration of conformity can be found online at www.siemens-home .bsh-group.com/uk/ among the additional documents on the product page for your appliance.

2.4 GHz band (2400–2483.5 MHz): Max. 100 mW 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. 100 mW

Installation instructions

Observe this information when installing the appliance.

16.1 Included with the appliance
After unpacking all parts, check for any damage in transit and the completeness of the delivery.

16.2 Safety clearances
Comply with the safety clearances for the appliance.

16.3 Dimensions
You will find the dimensions of the appliance here

16.4 Secure installation
Follow these safety instructions when installing the appliance.
WARNING ‒ Risk of poisoning!
Risk of poisoning from flue gases being drawn back in.
Room-air-dependent heat-producing appliances (e.g. gas, oil, wood, or coal- operated heaters, continuous flow heaters, or water heaters) obtain combustion air from the room in which they are installed and discharge the exhaust gases into the open through an exhaust gas system (e.g. a chimney). With the extractor hood switched on, the air is extracted from the kitchen and the adjacent rooms. Without an adequate supply of air, the air pressure falls below atmospheric pressure. Toxic gases from the flue or the extraction shaft are sucked back into the living space.

▶ Always ensure adequate fresh air in the room if the appliance is being operated in exhaust air mode at the same time as a room air-dependent heat- producing appliance is being operated.
▶ It is only possible to safely operate the appliance if the pressure in the room in which the heating appliance is installed does not drop more than 4 Pa (0.04 mbar) below atmospheric pressure. This can be achieved whenever the air needed for combustion is able to enter through openings that cannot be sealed, for example in doors, windows, in conjunction with incoming/exhaust air wall boxes, or by other technical means. An incoming/exhaust air wall box alone does not ensure compliance with the limit.
▶ In any case, consult your responsible chimney sweep. They are able to assess the house’s entire ventilation setup and will suggest suitable ventilation measures to you.
▶ Unrestricted operation is possible if the appliance is operated exclusively in air-recirculation mode.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in it and suffocate.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material.

WARNING ‒ Risk of fire!
Grease deposits in the grease filter may catch fire.
▶ The specified safety clearances must be complied with in order to prevent a build-up of heat.
▶ Observe the specifications for your cooking appliance. If gas and electric hobs are being operated together, the largest specified clearance applies.
Grease deposits in the grease filter may catch fire.
▶ Never work with naked flames close to the appliance (e.g. flambéing).
▶ Do not install the appliance near a heat-producing appliance for solid fuel (e.g. wood or coal) unless a closed, non-removable cover is available. There must be no flying sparks.

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
▶ Wear protective gloves.
The appliance may fall down if it has not been properly fastened in place.
▶ All fastening components must be fixed firmly and securely in place.
The appliance is heavy.
▶ To move the appliance, two people are required.
▶ Use only suitable tools and equipment.
The appliance is heavy.
▶ The appliance must not be fitted directly onto plasterboard or similar lightweight materials.
▶ To ensure correct installation, you must use a material that is sufficiently stable and suitable for both the structural conditions and the weight of the appliance.
Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.
▶ Do not make any changes to the electrical or mechanical assembly.
Risk of falling when working on the appliance

▶ Use a stable stepladder.
▶ Do not lean over the hob.
▶ Do not step on the hob or the work surface.
The filter cover may swing-out.
▶ Open the filter cover slowly.
▶ Take hold of the filter cover after opening until it no longer swings out.
▶ Close the filter cover slowly.
Risk of injury when opening and closing the hinges.
▶ Keep your hands away from the hinges.

WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appliance may damage the connecting cable.
▶ Do not kink or trap the connecting cable.
If the appliance or the power cord is damaged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box.
▶ Call Customer Service. → Page 14
▶ Repairs to the appliance should only be carried out by trained specialist staff.
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.
Improper installation is dangerous.
▶ Connect and operate the appliance only in accordance with the specifications on the rating plate.
▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
▶ The protective conductor system of the domestic electrical installation must be properly installed.
▶ Never equip the appliance with an external switching device, e.g. a timer or remote control.
▶ When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the conditions of Overvoltage Category III and according to the installation regulations.
▶ When installing the appliance, check that the power cable is not trapped or damaged.

16.5 Information on the installation situation

• Install this appliance on the kitchen ceiling or a stable suspended ceiling.
• To install additional special accessory parts, ob- serve the enclosed installation instructions.
• The appliance finds it more difficult to draw in the cooking vapors the further away they are from the hob. Therefore maintain a distance of at least 700 mm and no more than 1500 mm.

16.6 Instructions for the exhaust air pipe
The appliance manufacturer does not provide any warranty for faults attributable to the pipeline.

• Use a short, straight exhaust air pipe with as large a pipe diameter as possible.
• Long, rough exhaust air pipes, many pipe bends, or small pipe diameters reduce the suction power and increase the fan noise.
• Use an exhaust pipe that is made of non-combustible material.
• To prevent condensate from returning, fit the exhaust pipe with a 1° gradient from the appliance.

Flat ducts
Use flat ducts with an inner cross-section that corresponds to the diameter of the round pipes:

• A diameter of 150 mm corresponds to approx. 177 cm².
• A diameter of 120 mm corresponds to approx. 113 cm².
• Use sealing strips for different pipe diameters.
• Do not use any flat ducts with sharp bends.
  Round pipes
  Use round pipes with an inner diameter of 150 mm (recommended) or at least 120 mm.

16.7 General information
Follow these general instructions during the installation.

•  For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers.
• When discharging the exhaust air, the official and legal regulations, such as the regional building code. must be observed.
• The width of the extractor hood must correspond at least with the width of the hob.
• To optimally detect the cooking vapors, install the appliance in the middle of the hob.
• In order to freely access the appliance for servicing, select an easy-to-reach installation site.
• The surfaces of the appliance are sensitive. Avoid damaging them during installation.

16.8 Instructions for the electrical connection
In order to safely connect the appliance to the electrical system, follow these instructions.
WARNING ‒ Risk of electric shock!
It must always be possible to disconnect the appliance from the electricity supply. The appliance must only be connected to a protective contact socket that has been correctly installed.
▶ The main plug for the main power cable must be easily accessible after the appliance is installed.
▶ If this is not possible, an all-pole isolating switch must be integrated into the permanent electrical installation according to the conditions of overvoltage category III and according to the installation regulations.
▶ The permanent electrical installation must only be wired by a professional electrician. We recommend installing a residual-current circuit breaker (RCCB) in the appliance’s power supply circuit. Sharp-edged components inside the appliance may damage the connecting cable.
▶ Do not kink or trap the connecting cable.

• The connection data can be found on the rating plate. → Page 14

• The connecting cable is approx. 1.30 m long.

• This appliance complies with the EC interference suppression regulations.

• The appliance corresponds to protection class 1.
  You should therefore only use the appliance with a protective earth connection.

• Do not connect the appliance to the power supply during installation.

• Only a licensed professional may connect appliances without plugs. They are subject to the requirements of the local electricity provider.

16.9 Installation
Checking the ceiling

1. Check whether the ceiling is horizontal and adequately load-bearing.
   The max. weight of the appliance is 40 kg.
   Do not fit the appliance directly onto plasterboard (or similar lightweight materials) in a suspended ceiling.

2.  Drill the hole depth in accordance with the length of the screws.

3. Install the appliance with a fixing material that is sufficiently stable and has been adjusted accordingly for both the structural conditions and the weight of the appliance.

4. Check the cut-out area for existing cables of other appliances.

Preparing the ceiling

1. Ensure that the stability of the ceiling is guaranteed after the cut-outs have been made.
2. Cover the hob to prevent damage.
3. Saw a cut-out into the ceiling.
4. Remove any shavings.

Preparing the appliance

1. Remove the grease filters.
   To avoid causing damage, do not bend the grease filters.

2. Screw the flat duct connection onto the fan group.

Installing the appliance

WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
▶ Wear protective gloves.
The appliance is heavy.
▶ To move the appliance, two people are required.
▶ Use only suitable tools and equipment.

1. Insert the appliance into the cut-out until you hear the mounting brackets engage.

2. Carefully screw in diagonally opposite screws.
   Tighten the screws one at a time so that the appliance is not wedged in the cut-out.

3. Note: To ensure that the appliance is not damaged, do not overtighten the screws.
   Carefully tighten screws in succession until the appliance is flush-mounted on the ceiling.

Connecting the appliance

1. Undo the screws on the top frame assembly using a screwdriver and remove the top frame assembly.
2.  Press together the cable duct at the sides and remove it.
3. Disconnect the cable at the appropriate point.
4. Loosen the screws on the side covers and remove the covers.
5. Undo the opposite screws to loosen the fan box.
6. Push the fan box to the side and connect the appliance to the power supply.
7. Push the fan box to the other side and connect the pipework.
8. Position the fan box in the center and screw it firmly in place.
   Installation variants of the fan box
   The fan box can be rotated according to the installation situation.

Turning the air outlet to the back

1.  Starting with the delivery condition, turn the fan box clockwise so that the air outlet is pointing to the back.
2. Insert the extension cable.
3. Hook the cable into the cable guides 1 and 2.

Turning the air outlet to the front

1. Starting with the delivery condition, turn the fan box anti-clockwise so that the air outlet is pointing to the front.
2. Undo the screw on the metal hook.
3. Pull the cable behind the metal hook and hook it in the cable guides.
4. Store the remaining cable in the gap.
5. Tighten the screw on the metal hook so that it is firmly in place.

Turning the air outlet clockwise

1. Ausgehend vom Auslieferungszustand, den Lüfterkasten im Uhrzeigersinn drehen, sodass der Luftauslass nach rechts zeigt.
2. Undo the screw on the metal hook.
3. Das Kabel durch den Metallhaken ziehen.
4.  Das Kabel in die Kabelführung 4 einhängen.
5. Tighten the screw on the metal hook so that it is firmly in place.

Finishing connecting the appliance

1. Guide the cable through the opening in the side cover.
2. Insert the side covers and screw them firmly in place.
3. Connect the cable.
4. Press together the cable duct at the sides and attach.
5.  Fit the cover frame and screw it firmly in place.

Fitting the filter cover
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp edges.
▶ Wear protective gloves.
Risk of injury when opening and closing the hinges.
▶ Keep your hands away from the hinges.

1. Open the hinges on the filter cover.

2. Mount the filter cover on the designated screws and push it backward/forwards depending on the keyhole opening into the narrow section.

3. Tighten the fastening screws on the hinges.

4. Check whether the appliance frame is lying flush.
   Retighten the screws if necessary.

5. Insert the grease filters.
   To avoid causing damage, do not bend the grease filters.

6. Swing the filter cover-up and ensure that it engages.

Removing the appliance

WARNING ‒ Risk of injury!
The appliance is heavy.
▶ To move the appliance, two people are required.
▶ Use only suitable tools and equipment.
Components inside the appliance may have sharp edges.
▶ Wear protective gloves.
Risk of injury when opening and closing the hinges.
▶ Keep your hands away from the hinges.

1. Disconnect the appliance from the power supply.

2. Remove the grease filters.
   To avoid causing damage, do not bend the grease filters.

3. Open the cable duct on the filter cover and loosen the cable.

4. Undo the screws on the hinges up to approx. 7 mm.
   Do not loosen the screws fully.

5. Unhook and remove the filter cover.

6. Undo the screws on the top frame assembly using a screwdriver and remove the top frame assembly.

7.  Loosen the screws on the side covers and remove the covers.

8. Press together the cable duct at the sides and remove it.

9. Disconnect the cable at the appropriate point.

10. Undo the opposite screws to loosen the fan box.

11. Push the fan box to the side and release the pipework.

12. Push the fan box to the other side and pull out the mains plug.

13. Rotate the fan box in such a way that the air outlet faces forwards.

14. Remove the fan box.

15. Loosen the mounting brackets on the appliance using a screwdriver.

16. Slowly take the appliance out of the cutout.

BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
GERMANY
www.siemens-home.bsh-group.com
Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom
Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG

References

• My Siemens - Your world of possibilities | Siemens Home
• Connect your household | Home Connect
• Welcome to Siemens Home Appliances International
• Siemens Home UK | Technology meets Design

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>