Zetronix zAirPure-WiFi Hidden Cam Air Purifier User Manual

zAirPure-WiFi
Hidden Cam Air Purifier
User Manual

Air Purifier Operational Manual

ON/OFF: Turn on/off the Air purifier.
Quiet Mode: Low speed with 20-30 dB sounds.
High-Speed Mode: High speed with 30-35 dB sounds.
Timing 6 Hours: The air purifier will work 6 hours then turn off.
Timing 24 Hours: The air purifier will work 24 hours then turn off.
Air Purifier Feature:

1. 2-Stage Filtration System: True HEPA Filter, and High-Efficiency Activated Carbon Filter capture allergens.
2. Smoke, mold, and odor, in addition to removing 98% of airborne contaminants as small as 0.3 microns.
3. Ultra-Silent Operation: Filters the air with the lowest noise level as quiet as 20-30dB on Quiet Mode, helping you sleep deeply. And 30-35dB on High-Speed Mode for High-Efficiency Filtration.
4. Timing System: You can set 6 or 24 hours of working time. And the machine will shut down automatically.

Quality Assurance: 1-Year Warranty
Notice: Connect the power supply and the camera starts up automatically, then set up your camera by your phone or tablet device.

Quick Guide For APP Installation

For iOS Devices:
a. Scan QR Code for the iOS operating system to download and install the “Yoosee” APP with iPhone or iPad devices.
b. Search “Yoosee” in App Store with your iOS devices, download and install the APP.
c. Input www.yoosee.co on a PC web browser for iOS or Android devices QR code, download and install APP.
For Android Devices:
a. Scan QR Code for Android operating system to download and install “Yoosee” APP with Mobile or tablet devices.
b. Search “Yoosee” in Google Play with your iOS devices, download and install the APP.
c. Input www.yoosee.co on a PC web browser for iOS or Android devices QR code, download and install APP.

https://itunes.apple.com/cn/app/Yoosee/id981863450?mt=8

|

http://yoosee.co/Yoosee.html

Account Registration & Login:

a. Click the “Yoosee” App and “Quick register” for an account for new users.
b. Input mobile phone or email address for registration and set account password as APP prompt.
** Mobile phone number registration is available only in certain countries.
c. Login with a registered account to start camera device pairing or viewing. Login is also available with WeChat or Line account.

Adding New Camera Device:

Power camera device and follow prompts as APP indication. If a beeping sound or voice prompt is not heard from the camera device, please press and hold the reset button for the camera device for 5 to 10 seconds to activate rebooting for the device to factory default settings. (Pan & Tilt IP Camera reset button is located at back bottom or base, Bullet or Dome models reset button is located at cable end area)

Pairing Camera Device to Wifi Router:

a. Connect the mobile device to a Wifi router signal. (Ensure mobile is connected to 2.4Ghz Wifi signal as camera device does not support 5Ghz wifi signal currently.)
b. Start “Yoosee” APP, click “+” icon on top right corner or center of APP interface, Click “Add new device” and select “Fast Networking” (For camera device that supports AP connection) or Smartlink (For camera device that supports sound wave connection) to start pairing installation.
** APP interface might vary from APP version or Devices Operating System.
** For old version camera devices or firmware, please use Smartlink to pair to Wifi Router.

c. Click “Hear a beep for connection” when a beeping sound or sound prompt is heard from the camera device. Click “Connect the AP hotspot” for the next APP interface.
Select the hotspot at the interface from our product corresponding hotspot
(generally GW IPC XXXXXXX, “XXXXXXX” refers to camera device ID number) to connect and proceed to complete all steps as APP prompts to complete camera device pairing installation procedures.

Pairing Camera Device to Wifi Router via QR code:

If you’re unable to connect via the first method from section 3, please try the following.
a. Connect the mobile device to a Wifi router signal. (Ensure mobile is connected to 2.4Ghz Wifi signal as camera device does not support 5Ghz wifi signal currently.)
b. Start “Yoosee” APP, click “+” icon on top right corner or center of APP interface, Click “Add new device” and select “QR Code Networking”
** APP interface might vary from APP version or Devices Operating System.
** For old version camera devices or firmware, please use Smartlink to pair to Wifi Router.

c. Click “Heard the sound of du du” when you hear a tone sound from the device, and then point the QR code generated on the mobile phone to the device’s camera about 1 foot away, when the camera recognizes it the device emits a beep.

006ceshi 10Cl12723422486201230880C371994011

Using Camera Device with AP Standalone Mode:

1. Press and hold the reset button for the camera device for 5 to 10 seconds to activate rebooting for the device to factory default settings.

2. Wait for 5 minutes after the camera device is restored to factory default settings.
   Press and hold the reset button till the sound prompt is heard.

3. Go to network settings for mobile or tablets device and select GW_AP_XXXXX ( generally XXXXX refers to camera ID number).

4. Open the “Yoosee” APP and select “ skip, shift to AP mode ”. Select “Confirm” and shift to AP Standalone mode for the camera device.

Understanding Yoosee APP:

Diagram 1:
a. Camera device name. Click on the icon to change the device name.
b. Add a new camera device to APP.
c. Camera status (Online or Offline).
d. Arm (On Guard) or disarm ( Disable Alerts) for the camera device.
e. Share camera device with other users.
f. Playback video clips for the camera device.
g. Camera device settings and features.
h. Camera main interface (display all added camera devices).
i. Display all alarm alerts messages.
j. Snapshots of camera devices.
k. APP account information and details.
l. One key arm or disarm for all camera devices within APP.
**Available only for new version camera model. Ensure Firmware and APP version is upgraded to the latest version.
If the feature is not available, please select the “My” icon on the right bottom of the APP interface, click “General settings” and turn on “Quick set alert mode”. The feature is made available for 2 or more camera devices.
Diagram 2:
m. Camera device settings & features.
n. Display number of users view camera and connection bandwidth
o. Set Preset View Position options. (Available for Pan & Tilt Models with Preset View option).
p. View resolution option. LD (Lowest Resolution), SD (Standard), HD (High Resolution).
q. Mute or disable the mute feature for camera device
r. Video recording to mobile phone option.
s. Voice intercom feature. (Single or Duplex defers to camera processing chipset).
t. Click to capture a snapshot view of the camera device.
u. Enlarge camera device view

Camera Device Settings & Features:

a. Camera device information.
b. Set time zone and time for the camera device.
c. Adjust picture resolution and volume for the camera device.
d. Recording settings for the camera device. (Micro SD Card is inserted and made available)
e. Alarm settings for the camera device. (Receive Alarm prompt, Alarm Buzzer, Motion Detection & RF 433 MHz Sensors).
e.i: Camera Arm and Disarm Time;
e.ii: Motion Detection On/Off and adjustment to Motion Sensitivity control.
e.iii: Alarm notifications, alarm interval, and alarm buzzer settings.
f. RSTP settings and RSTP password option.
g. Networking settings for the camera device. Switch to Wifi or Ethernet option.
h. Check camera device firmware updates
i. Unbind devices (To switch camera device location or pair to new Wifi router).

Sharing Camera Device:

Due to higher security for camera devices, Yoosee camera devices are made to recognize only one account. To add camera devices to other users, the camera can only be shared and managed via:
a. Mobile number or email
b. Sharing or QR code or link via social media ( WeChat or Line)
c. Scanning of QR code.

http://share.yoosee.co/share?Type=1&InviteCode=60164694322116036&SharerName=018281924&AppVersion=3015682&DeviceID=14141510

CMS Client Software for PC (Windows Operated System):

Input www.yoosee.co on your computer browser. Select CMS Client icon to download software for PC (Windows Operated System). Log in with the below options:
a. Admin login ( LAN environment with a blank password)
b. Mobile number login (ensure the mobile number is registered with the account)
c. Email or Yoosee account number ( Yoosee account number can be found in “Account information” at “My” icon.

CMS software will automatically search for the available devices in LAN or the same WLAN network environment. Dialog box will pop up if any devices are found, click “Add all” devices and add them to the device list.
Add Camera Device Manually:
Click”+” on CMS left interface, select “Manual add device”, input device name, device ID, and password, and click OK to complete adding process.

Monitoring with CMS:
Open CMS software, right-click on Device List and select the “all connect” option in the CMS menu or select an added device in the device list and right- click to start monitoring.

Specifications

Web browser IE7 and above,chrome,firefox safari.etc

Frequently asked questions:

1. The device indicated offline status on the APP device list
   Ensure the camera is connected to Wifi and has access to the intranet. Please check if the Wifi router has internet access and the indicator light is functional.

2. When the APP of a mobile phone cannot receive an Alarm push notification.
   Ensure Alarm (Motion Detection or Sensors are available) and Alarm Push notification is activated. Arm camera device at APP device main interface (icon indicates On Guard status. Check mobile device if notification is forbidden.

3. Motion Detection false alarm notification is high.
   Adjust motion detection sensitivity option under Alarm settings. If the option is unavailable, please update the APP version and camera device Firmware.

4. Recording or video files are unavailable.
   Ensure the Micro SD card is formatted to FAT32. Please also check if the Micro SD card is damaged. **Micro SD card capacity above 64GB, please use C10 (Class

10. card.

5. The camera device cannot connect to WiFi.
   a. Check if the Wifi signal is 2.4Ghz bandwidth as the camera device does not support a 5Ghz Network currently. Please ensure the Wifi password is correct and as requested format as per APP indicated.
   b. Ensure the Wifi router does not limit Wifi access such as AP isolation, limit the number of devices for internet use, anti-free loading, etc…
   c. Some mobile phone version requires location services for Wifi list.

6. AP hotspot or Camera device ID is not indicated in the Wifi list.
   a. Ensure camera device support AP (Camera supporting sound wave Smartlink does not support AP hotspot or Fast Networking option.
   b. Mobile phone and camera device is too far apart. Please shift distance within 10 meters.

RSTP Password:

To further enhance safety for the camera devices ( iOS 4.3 & Android 34 version above), Please set the RSTP password as indicated with APP. You can switch off or set the RSTP option via APP if required.
RSTP password is used for recording devices or software like NVR, CMS Client, Onvif protocol purposes to enhance better security and privacy.

Regulatory Compliance Information:

The camera device complies with rules of the CE, FCC, and Quality Management 14 Rules as well as PDCA (Plan, Do, Check and Act). The equipment generates and can radiate radio-frequency or Wifi energy. Please use and install equipment in strict accordance. The equipment has been tested and found to comply with CE & FCC rules. These specifications are designed to provide reasonable protection against such interference, however, there is no guarantee that interference will not occur.

References

• 深圳技威时代科技有限公司 - 有看头下载
• 深圳技威时代科技有限公司 - 有看头下载

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>