Zetronix V2 4K PRO Power Bank User Manual
- June 1, 2024
- Zetronix
Table of Contents
Zetronix V2 4K PRO Power Bank
Product Specifications
- Resolution Ratio: 1080P/720P/640P/320P
- Video Format: AVI
- Frame Number: 25
- Visual Angle: 150 / 90 degree
- Motion Detection: Camera Straight line 6 meters
- Shooting Minimal Illumination: 1LUX
- Video Duration: Over 1 Hour
- Compressed Format Recording Range: H.264
- Consumption: 380MA/3.7V
- Storage Temperature: -20 to 80 degrees centigrade
- Operating Temperature: -10 to 60 degrees centigrade
- Operation Humidity: 15-85%RH
- Memory Card Type: TF card
- Player Software: VLCPlayer/SMPlayer
- Computer Operating System: Windows/Mac OS X
- Mobile Phone Operating System: Android/iOS
- Web browser: IE7 and above, Chrome, Firefox, Safari, etc.
Product Usage Instructions
- To turn on the camera, press the power button. To turn it off, press and hold the power button for 3 seconds. You can press Reset for 5 seconds to restart the camera to factory settings.
- Download and install the APP software on your mobile phone to enable remote viewing of the camera.
- In your mobile phone’s WI-FI settings, find the WiFi account (UID number) and connect to it. Open the phone APP (LOOKCAM) for viewing.
- In the camera interface, click on the setup icon, go to Advanced Configuration, WiFi Connection Configuration, Find WiFi, Enter Password, and click OK. The camera will restart automatically for remote viewing access.
FAQ
- Q: How do I reset the camera?
- A: Press and hold the camera power button for 5 seconds to restart the camera to factory settings.
- Q: What is the role of the red and blue lights on the camera?
- A: The red light indicates power status, always on when the camera is powered on. The blue light is the WIFI indicator.
- Q: How do I connect the camera to my mobile phone?
- A: Enter the camera’s WiFi account (UID number) in your phone’s WI-FI settings and connect to it. Open the LOOKCAM app for viewing.
Diagram
Introduction
Thank you for having chosen this product. This camera adopts a unique ultra- portable design, which enables it to be applied in various fields and brings you a convenient, safe and colourful daily life. Please follow the steps in the instructions to set up your camera correctly.
- Press the camera power button to turn on the camera. To turn it off, press and hold the camera power button for 3 seconds. (When the camera is on, you may press Reset for 5 seconds to restart the camera for factory settings)
Mode represented by key indicator
Red light is the power indicator, which is always on when the power is on.
Blue light is a WIFI indicator.
Specific mode is as follows:
- Point-to-point mode: Blue light flashes slowly
- Configuration of remote camera completed: Blue light is always on If you are not clear what mode it is, reset the camera and switch to point-to-point mode.
Note: This reset works only when the blue light is always on or flashes slowly. Press the Reset key for about 5 seconds until the indicators all go out, and let go until the camera starts (about 30 seconds).
Download APP software
- Method 1. Scan the QR code (Figure 1), and enter the download page (Figure 2). Choose to download the software according to the system of the mobile phone. Download and install the computer client through the download address http://lookcam.ffvv.xyz:8800/lookcam_download.html
- Method 2. For Android, search for APP software called LOOKCAM on Google Play, and download and install it. For Apple, search for APP software called LOOKCAM in the App Store, and download and install it.
- Note: If you scan with WeChat, when (Figure 2) appears, click the browser in sharing in the upper right corner to open and download the software.
- After downloading and installing, the following icon appears on the mobile phone.
Point-to-point connection of the mobile phone to the camera
Enter the mobile phone WI-FI settings, find the WiFi account (UIDnumber) and
connect. As shown in the figure.
-
After the UID of the device is connected, open the phone APP (LOOKCAM). (As shown below)
-
Click Cancel point-to-point short-range viewing (point-to-point is connected and viewing allowed) and click Yes to fast pair router and enter remote viewing (If you need to set up the remote, please continue to read the instructions and follow the steps)
Set up the camera remote
When point-to-point video can be viewed, return to the previous level and
enter the interface as shown in the figure.
Click the setup icon → Advanced Configuration →WiFi Connection Configuration →
Find WiFi → Enter Password → Click OK and the camera will restart
automatically. (Wait for the camera to restart (about 40 seconds). The camera
will change from offline to online, at which time the viewable video can be
accessed remotely.)
Note: When connecting to the remote, make sure you enter the correct WIFI password. Otherwise, the camera will restart automatically after clicking OK. However, due to the wrong password, the camera will not be online, and then you need to reset it and re-pair it.
| Resolution Ratio | 1080P/720P/640P/320P |
|---|---|
| Video Format | AVI |
| Frame Number | 25 |
| Visual Angle | 150 /90 degree |
Motion Detection Camera
Shooting
| Straight line 6 meters
Minimal Illumination| 1LUX
Video Duration| Over 1 Hours
Compressed Format| H.264
Recording Range| 5㎡
Consumption| 380MA/3.7V
---|---
Storage Temperature| -20-80 degree centigrade
Operating Temperature| -10-60 degree centigrade
Operation Humidity| 15-85%RH
Memory Card Type| TF card
Player Software| VLCPlayer/SMPlayer
Computer Operating
System
| Windows/Mac OS X
Mobile Phone Operating
System
| Android/iOS
Web browser| IE7 and above, chrome, firefox safari.etc
Largest customer| 4
Specifications and Parameters
- What Micro SD Card is required for recording? Why can’t I use my Micro SD Card for recording?
- The camera supports up to 128 GB Micro SD card. Please use a High-Speed Class 10 FAT formatted memory card. You must format the Micro SD before using it. If the SD card is not recognized when inserted into the camera, just remove and re-insert.
- Why can’t the camera go online?
- Powerless.
- Check if your router is working properly or not.
- Weak Wi-Fi signal.
- Wrong password wrong while Wi-Fi setting
- Why is remote monitoring not smooth?-
- You should choose a suitable resolution to watch according to your internet speed.
- Why I can’t save it to my SD card?
- SD Card must be formatted if this is your first time to use it.
- How do I do when I forget my password?
- Press the reset key for 10 seconds and restore the factory setting.
- The initial password for each camera is 123456.
- Please change the password to ensure the security of your camera.
- If the camera cannot be connected to the router, please reset, and connect the hot spots before completing the configuration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>