Zetronix ZWATCH-1080IR Camera Watch User Manual
- June 1, 2024
- Zetronix
Table of Contents
- DIAGRAM
- FUNCTION/MODE LIGHTS INDICATION
- CHARGING THE KRONOS WATCH
- ADJUSTING THE TIME ON THE WATCH
- RECORDING VIDEO WITH AUDIO
- RECORDING AUDIO ONLY
- TAKING PICTURES
- RECORDING BY MOTION DETECTION
- SHUTTING OFF THE WATCH’S CAMERA
- ACCESSING THE RECORDED MEDIA
- VIDEO DATE/TIME STAMP
- MAINTNANCE
- TROUBLESHOOTING
- DEVICE SPECIFICATIONS
- ZETRONIX WARRANTY
- CUSTOMER SUPPORT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Zetronix ZWATCH-1080IR Camera Watch
DIAGRAM
- Hidden Mic
- Motion sensor
- USB/PC Interface
- Infra-red LEDs
- HD Camera
- Function switch
- Top Indicator light (red/green)
- Time adjustment knob
- Bottom Indicator light (blue)
- Mode Switch
FUNCTION/MODE LIGHTS INDICATION
Solid BLUE light | Video recording standby mode |
---|---|
Solid GREEN light | Sound recording standby mode |
Solid BLUE and GREEN lights | Picture camera standby mode |
Solid RED light | Battery charging mode |
Flashing BLUE light | Memory full |
Flashing GREEN light | Low battery |
CHARGING THE KRONOS WATCH
- Unscrew the button ❸ to access the hidden USB port
- Connect the included USB cable to the USB port ❸ and to a universal AC wall charger or any computer’s USB port.
- A red light will come on to indicate that it is charging.
The top red light ❼ will go off once the watch is fully charged.
ADJUSTING THE TIME ON THE WATCH
- Using your fingernail or a knife, pull the time adjustment knob ❽ outwards.
- Turn the knob ❽ to turn the dial to the correct time.
- To resume the watch operation, push the knob back in
RECORDING VIDEO WITH AUDIO
- Press and hold the Function switch ❻ for 2 seconds to turn on the device. The bottom blue light ❾ will come on indicating video recording standby mode.
- Quickly press the function ❻ switch to start the recording. The blue light will blink 3 times and go out to indicating video is recording.
- Pressing the function switch ❻ again, will pause the recording placing the device back on video recording standby more, indicated by a solid blue light ❾
RECORDING AUDIO ONLY
- Press and hold the Function switch ❻ for 2 seconds to turn on the device. The bottom blue light ❾ will come on indicating video recording standby mode.
- Press the Mode switch ❿ to switch the watch to audio recording standby mode indicated by a green light ❼.
- Quickly press the function switch ❻ to start the recording. The green light ❼ will blink 3 times and go out to indicating audio is recording.
- Pressing the function switch ❻ again, will pause the recording placing the device back on audio recording standby more, indicated by a solid green light ❼.
TAKING PICTURES
- Press and hold the Function switch ❻ for 2 seconds to turn on the device. The blue light ❾ will come on indicating video recording standby mode.
- Press the Mode switch ❿ twice to switch the watch to picture taking mode indicated by both the green ❼ and blue lights ❾.
- Quickly press the function switch ❻ to snap a picture.
Both the green ❼ and blue lights ❾ will flash off to on indicating the picture was taken.
RECORDING BY MOTION DETECTION
- Press and hold the Function switch ❻ for 2 seconds to turn on the device. The bottom blue light ❾ will come on indicating video recording standby mode.
- Press and hold the Mode switch ❿ for 3 seconds, both the green ❼ and blue light ❾ will flash 3 times and go out, indicating the camera is on motion activation mode.
The watch will records video & audio for 60 seconds once motion is detected.
To remove the camera from motion activation mode, press and hold the function switch ❻ for 2 seconds, the blue light will come on bringing the camera back to video recording standby mode.
SHUTTING OFF THE WATCH’S CAMERA
To shut off the camera device, first ensure the watch is on any of the standby modes. Press and hold the Function switch ❻ for 3 seconds. The Green light will flash 3 times and go out shutting off the device.
ACCESSING THE RECORDED MEDIA
- Unscrew the button ❸ to access the hidden USB port
- Connect the included USB cable to the USB port ❸ and to your computer’s USB port.
- The red ❼and blue ❾ light will come on indicating a connection.
4.Within 30 seconds your computer should prompt you with options for viewing the files. If it doesn’t, please browse the files from “This PC”, “My Computer”, or “File Explorer” if using a windows system, or look for a new drive in your desktop if using Mac OS.
If this is the first time connecting the watch to the computer, your computer will first automatically install the required drivers.
VIDEO DATE/TIME STAMP
-
To update or remove the video date/time stamp watermark on the video recording, please download the zUtility App from the Zetronix website.
https://www.zetronix.com/download -
After downloading and installing the App, you will be prompted to choose the device.
From here choose the zWatch-1080IR.
-
Next choose Time/date Setup and follow the on-screen instructions
MAINTNANCE
Battery:
If the watch is not in use for a long time, please have it fully charged
before using. For safety, do not put this watch too close to a fireplace or
overheated areas.
Operating temperature:
0—40°C. For the extension of battery life, it is better to use it in room
temperature.
Operating humidity:
20% -80%. This product does not have water resistance function (only
waterproof when MIC2 is used). So it cannot work in the very humid environment
or under water.
Lens:
Do not expose the camera lens directly to strong light such as sun light so as
to avoid damage to the optical sensors.
Cleaning:
Always use dry cloth to clean up the glass before doing recording. The watch
has a transparent cover on the glass for protection; please remove it before
using the camera.
TROUBLESHOOTING
Most issues can be solved by resetting the watch or formatting the memory.
Resetting the watch:
Press and hold both switches ❻ and ❿ simultaneously for 2 seconds. The lights
will go out shutting down and resetting the camera watch functions.
Formatting the memory:
WARNING: Formatting the memory will wipe out all the recorded media
stored in the watch.
Formatting the memory will clean up any file corruption that may exist preventing the device from operating correctly.
Formatting on a PC:
-
Connect the watch to your PC as instructed in section 9 of this manual.
-
Locate your hard drive directory. It will be under “My Computer” or “This PC”.
You can also open a new File Explorer window and your drives will be listed there. The watch will appear as a “Removable Drive” or “USB Drive”.
-
Right Click on the removable drive and select Format
-
From the options shown, make sure that you have selected FAT32 or as your file system. Leave other settings at their defaults.
-
Click Start. After a few seconds the memory will be formatted.
WARNING: Do not format in exFAT or NTFS, if you have a memory larger than 32GB please contact support.
Formatting on a Mac
Connect the watch to your PC as instructed in section 9 of this manual.
-
Locate and open a program called “Disk Utility”. It is usually found by going into the application folder and opening the utility folder.
App Locations -> Utilities -
In Disk Utility, Select your watch removable drive from the list on the left. Most likely named “NO NAME”.
-
Along the top of the window menu, click on the button labeled Erase (highlighted in the circle above
-
From the dropdown menu labeled Format, choose MS-DOS (FAT).
-
When ready, click the button in the lower right corner labeled Erase.
After a few seconds the memory will be formatted.
DEVICE SPECIFICATIONS
Item | Parameter |
---|---|
Photo format | JPG |
Audio format | WAV |
Video resolution | 1920×1080 |
Photo resolution | 4032×2912 (12MP) |
Frame rate | About 30 frames per second |
Mini illumination | 10 Lux (infrared light on opening night vision) |
IR Switch | Automatic |
USB type | Mini 8 Pin / USB 2.0 |
OS Support | Windows me/2000/Vista/XP/7/10;Mac OS10.4;Linux |
ZETRONIX WARRANTY
Zetronix Corporation (“Zetronix”) warrants this product against defects in material or workmanship as follows: PRODUCT: Zetronix will repair this product with new or refurbished parts, free of charge, for a period of one (1) year from the date of original purchase in the event of a defect in materials or workmanship. REPAIRS: Zetronix will repair or replace defective parts used in the repair or replacement of this product with new or refurbished parts, free of charge, for a period equal to the remainder of the original limited warranty period on the original product, or for 60 days after the date of the repair or replacement, whichever is longer. This warranty is extended only to the original purchaser. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that the unit is within the warranty period, must be presented to obtain warranty service. To obtain warranty service, you must take this product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to Zetronix Corporation. See below for additional information. This warranty only covers failures due to defects in materials and workmanship, which occur during normal use.
The warranty does not cover damages, which occurred in shipment, cosmetic
damage, damage that is attributable to acts of God, failures which are caused
by products not supplied by the warrantor, or failures which result from
accident, misuse, abuse, neglect, mishandling, faulty installation,
misapplication, improper installation, operation or maintenance, alteration,
modification, introduction of sand, humidity or liquids, line power surge,
improper voltage supply, lightning damage, or subjecting the product to
operating/environmental conditions in excess of the maximum values or below
the minimum values set forth in the applicable specifications, or products
serviced by anyone other than Zetronix. This warranty is invalid if the
factory-applied serial number has been altered or removed from the product.
This warranty does not cover products sold AS IS or WITH ALL FAULTS. This
warranty excludes consumable parts such as batteries and power supplies.
Zetronix Corporation (“Zetronix”) warrants this product against defects in
material or workmanship as follows:
PRODUCT: Zetronix will repair this product with new or refurbished parts,
free of charge, for a period of one (1) year from the date of original
purchase in the event of a defect in materials or workmanship. REPAIRS:
Zetronix will repair or replace defective parts used in the repair or
replacement of this product with new or refurbished parts, free of charge, for
a period equal to the remainder of the original limited warranty period on the
original product, or for 60 days after the date of the repair or replacement,
whichever is longer. This warranty is extended only to the original purchaser.
Proof of purchase in the form of a bill of sale or receipted invoice, which is
evidence that the unit is within the warranty period, must be presented to
obtain warranty service. To obtain warranty service, you must take this
product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to Zetronix
Corporation. See below for additional information. This warranty only covers
failures due to defects in materials and workmanship, which occur during
normal use.
The warranty does not cover damages, which occurred in shipment, cosmetic
damage, damage that is attributable to acts of God, failures which are caused
by products not supplied by the warrantor, or failures which result from
accident, misuse, abuse, neglect, mishandling, faulty installation,
misapplication, improper installation, operation or maintenance, alteration,
modification, introduction of sand, humidity or liquids, line power surge,
improper voltage supply, lightning damage, or subjecting the product to
operating/environmental conditions in excess of the maximum values or below
the minimum values set forth in the applicable specifications, or products
serviced by anyone other than Zetronix. This warranty is invalid if the
factory-applied serial number has been altered or removed from the product.
This warranty does not cover products sold AS IS or WITH ALL FAULTS.
This warranty excludes consumable parts such as batteries and power supplies.
CUSTOMER SUPPORT
Contact Us
Still Have Questions?
Do NOT return your camera!
We can help!
Contact Zetronix Tech Support
By Phone 877-644-7592
By Email support@zetronix.com
On the Web http://help.zetronix.com
http://help.zetronix.com
©2018 Zetronix Corp.