Motack YYS 573 360 Degree Bicycle Mobile Phone Mount User Manual
- June 1, 2024
- Motack
Table of Contents
Motack YYS 573 360 Degree Bicycle Mobile Phone Mount
Part Name
- Lock Knob
- Fixed Clamp
- Joint Ball
- Nut
- Groove
- Lower Arm
- Upper Arm
- Red Switch
How to Use
-
Unscrew the nut and press the joint ball into the socket of the phone holder through the nut.
Then tighten the nut.
-
Loosen the fixed clamp and mount it on the handlebar.
-
Tighten the knob to lock the clip onto the handlebar.
-
Make sure the red switch on the back is at “unlock” side and push the lower arm of the phone holder towards your phone and place your phone in.
-
Turn the red swith on the back to “lock”.
Warm Tips
- This bike phone holder can only support phones up to 17mm thick (including the phone case).
- Please make sure the security lock is locked after you place your phone in the mount.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>