C B 63709 Whitehall Security Light Instruction Manual

C B 63709 Whitehall Security Light

Product Information

Specifications

• Model: 63709
• Power Source: Solar Powered
• Type: Whitehall Security Light with Sensor
• Operating Range: Up to 7 meters

Product Usage Instructions

General Precautions
Keep out of reach of children.

Pre-Installation Planning
Ensure proper planning for installation.

Installation
The Whitehall Security Light should be placed 7 meters away from areas with regular movement for optimal performance.

Operation
The switch at the bottom of the light controls the ON and OFF functions. Select ‘ON’ for the light to illuminate when the sensor is triggered.

Troubleshooting
If the light does not come on, check the battery pack placement.

Care and Maintenance
For battery recycling and disposal, refer to local recycling centers or follow government regulations.

FAQ

• Q: What should I do if the light does not illuminate?
  A: Check the placement of the battery pack.

• Q: How far should I install the Whitehall Security Light from areas with regular movement?
  A: It is recommended to install it approximately 7 meters away for best results.

• Q: How do I operate the light?
  A: Use the switch on the bottom of the light to select the ‘ON’ function for it to illuminate when triggered by the sensor.

IMPORTANT INFORMATION

• Keep these instructions safe for future reference.
• Your motion light and solar panel are both weatherproof.
• You can mount your motion light indoors, but your solar panel must be installed outdoors to receive light from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Prior to installation, lay out all the components and check the part list section in this manual.
• Never look directly into the solar motion light when illuminated.

IMPORTANT: READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE INSTALLING OR SERVICING THIS PRODUCT. SAVE THIS MANUAL FOR FUTURE REFERENCE.

PARTS LIST

TOOLS REQUIRED (not included)

GENERAL PRECAUTIONS
Keep out of reach for children.

PRE-INSTALLATION

PLANNING INSTALLATION

• Carefully remove the fixture from the carton and check that all parts are included. Be careful not to misplace any of the parts needed for installation.
• For best results, determine light placement location before assembly. Charge the light in full sunlight for 24 hours prior to using.

INSTALLATION INSTALLATION

Choose an ideal location.
Choose an outdoor location with full, direct sunlight so that the solar panel can receive at least 6-8 hours of sunlight each day. Shady locations will result in the battery receiving less energy and shorten the duration of illumination at night. The selected location should not be near strong lighting sources such as street lights. This may cause the light to turn off automatically as the built-in sensor detects the nearby lighting source. The Whitehall Security Light is ideal for night lighting in the garden, patio, lawn etc. One can also use it in the same manner to charge and store energy outdoors during the day and bring it in at night for indoor illumination.

The Whitehall Security Light uses a highly sensitive motion sensor. Therefore placement position of the light is important. For best results we recommend you place the Whitehall 7m away from areas where it is likely to be triggered by unintended movement. For example, windows where there is regular movement in the house.

OPERATION

The switch located on the bottom of the light is to turn on the product and select ON function to operate. The Switch will have the following selection functions reading left to right The right

• ON: When this ‘ON’ function is selected the light will remain ‘OFF’ until the sensor is triggered then illuminate to full brightness
• OFF: The unit is OFF.

TROUBLESHOOTING

• PROBLEM
  Light will not come on.

• POSSIBLE CAUSES

  • Solar panel not positioned in direct sunlight.
  • Battery pack not fully charged.
  • Solar panel no longer as bright.

• SOLUTION

  • Reposition the solar panel.
  • Recharge the battery pack recharge pack.
  • Sun exposure may fluctuate as the season change. Reposition the light or replace the battery pack.

CARE AND MAINTENANCE

• From time to time, ensure the plug between the solar panel and light is securely connected.
• It is advised to adjust the angle of the solar panel to optimise the exposure to the sun during the winter months.
• The solar panel and the lens should be cleaned with a damp cotton cloth on a regular basis to ensure optimal performance. Periodically, utilise the same technique to clean the lens of the motion light.
• Never let any abrasive material come into contact with the solar panel.

For recycling and disposal of batteries to protect the environment, please check the internet or your local phone directory for local recycling centres and/or follow local government regulations.

Brunnings Import Export Pty Limited
3/19-23 Clarinda Road,
Oakleigh South VIC 3167
Customer Helpline: 03 9543 5600

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>