oem Y99 Heart Rate Smart Bracelet Instructions
- June 5, 2024
- OEM
Table of Contents
- oem Y99 Heart Rate Smart Bracelet
- Settings
- Search and download H Bond APP
- Product motivation and installation
- Connect the bracelet
- Appearance Introduction
- Functions Introduction
- Motion alert- remember to move
- About the Waterproof
- Product parameters
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
oem Y99 Heart Rate Smart Bracelet
Settings
Use H Bond APP on your iOS or Android smartphones (No lpad or Computers)
as follows.
Note: The hardware and system of your phone shall meet the following.
Search and download H Bond APP
- Search and download H Band APP from the Apple Store, 91 Assistant, 360 Mobile Assistant, or other app stores.
- Scan the QR code. It probably has a problem opening the link by scan tools of your cell phone, please copy the link and open It through browsers.
Product motivation and installation
The product must be activated by charging before initial use and then charging the product to ensure a normal power supply. The hand ring will automatically power on.
- Rotate at 45 degrees, remove the strap
- Take apart the watchband, and one end of the inside with the charging symbol is the USB charging port
- The end of the USB chip is inserted into the USB charging tank
- Switch on the power and start charging.
Working time: continuously working for 5 days under normal conditions.
Connect the bracelet
Open Bluetooth and H Band APP, click connection. select to connect. please choose to allow access to location info. When 1he tracker is connected!!d successfully, the sign on 1he upper left comer of It is displayed like this:
Notes while connecting:
- Bluetooth is turned on
- . Sufficient power in the bracelet
- Keep your cell phone and bracelet within 50cm when connecting
- If your phone can’t find the bracelet in the APP, please open all permissions of
Band software in your phone settings.
Common Questions:
The equipment could not be found when connecting?
- Ensure that the Bluetooth of the smartphone is on, the smartphone operating the system should be Android 4.4 and above, or IDS 8.0 and above.
- Ensure that the distance between the phone and the device is less than 0.5 meters. After connection, the device should be kept in a valid range (normally less than 10 meters)
- Ensure that the equipment is not being recharged, If you still have problems after charging, please be free to contact us.
0ccasional Bluetooth (connection failed?)
- The Bluetooth service has an exception after the phone is restarted.
- Restart the phone or the Bluetooth service, then It can connect properly
Appearance Introduction
Names of different parts
Functions Introduction
Interface
Note: Interfaces of finding the phone, stopwatch, and countdown are closed by default, which will be displayed on the bracelet after turning them on in the APP settings- My device-Switch setting.
Setting the interfac e
Make sure the bracelet and APP are connected. Enter APR click Settings – y99-
Main interface style settings – select the corresponding style. It can be
checked on the screen of the tracker.
Turn on/turn off Turn on: On power, touch the screen and hold for about 4 seconds, enter the main interface; Touch the button and hold for 4 seconds, enter the Bluetooth address and software version interface. Off power: Switch to the shutdown interface and touch the screen for 4 seconds. Sport mode
- Press the sport mode option for 4 seconds for you to enter into sport mode. There are 10 sports modes in total
- a. You can click the touch key to choose your sport mode
- b. Press and hold the touch key for 2 seconds to enter your sports mode
Exit sport mode
Switch to the interface of photo1 Click the touch button, enter the interface of photo 2 Then click the touch button for 4 seconds, Yan can exit sport mode. If you want to pause”, you can press the touch button for 2 seconds
Data saving
- a. If the sports last less than 1 minute, the user will be reminded of unsuccessfully saving the data
- The screen would return automatically to the main interface within 4 seconds but Sport mode will work in the background
Steps, calories, mileage
Enter the step counting interface, which shows the current number of steps,
targe progress, calories, and distance of that day. The screen would off after
5 seconds. The steps are detected by the acceleration sensor, and a small
amount of error (within 10%) is in a reasonable range.
About heart rate testing
Enter the heart rate interface, and the bracelet would test automatically. In
the beginning, the data would fluctuate, but it will gradually stabilize.
After the test, it would show the result. If your heart rate can’t be
detected, the screen would show in this way, —/—. If there is no operation,
the screen would be closed after the 60s. (No matter whether the heart rate is
detected or not).
Heart rate monitoring
- As long as you wear the bracelet, it will automatically detect your heart rate, steps, and calories, and sync to APP
- Automatic heart rate monitoring is on as default and it automatically detects every 30 minutes /If you want to turn it off, please set it in the app: Settings – Y99- Switch setting – HR automatic monitoring-turn off
- To monitor your heart rate more accurately, please keep it a bit tighter than usual when you are taking exercise.
Sleep monitoring
Enter the sleep monitoring interface, which shows the total sleep time of
the previous day. This function works automatically. Generally, you can know
the data 10-30 minutes later after getting up.
Looking for a cell phone
Keep the Band working in the background on your phone, if you switch the
interface to the searching mode and hold for 4 seconds, the phone Connected to
the watch would ring and vibrate.
Stopwatch
Turn on the stopwatch in the APP then turns to the stopwatch interface by
pressing the screen and holding it for 4 seconds.
Countdown
Turn on the countdown in the APP and choose a time period, after pressing
OK, the bracelet would automatically display the countdown. Press and hold for
3 seconds, it would be turned off.
Information reminder
Turn on APP- Settings-My device-Message alert, turn on or turn off the
alert. If you want to display the messages, please set them in the
corresponding APP
Call reminder
After setting up a call reminder, the bracelet would continually vibrate
when someone calls in. You can make it mute by short touch and reject to pick
by long touch.
Alarm clock
In the APP you can set alarms and choose the right icon. The maximum of alarms
is 20.
Motion alert- remember to move
Set a reminder time in the APP it’s the time, the tracker would alert.
Heart rate alert
The bracelet automatically detects heart rates, if the data reaches the
warning number or higher than that, the bracelet would automatically remind
you, the default reminder value of heart rates is 115, and you can set a new
one according to your situation.
Remote control to a camera of a smartphone
Connect the bracelet and open the APP click Y99, take a photo, enter the
camera interface, and the wrist screen automatically turns on. Then you can
click the bracelet to take photos.
Wearing test
When the switch in the APP is turned on, your wrist would be tested in the
wearing process to avoid wearing
Female physiological period
The female function is only used for female users. It would be turned on
when setting the profile as a female in the APPSet the data after turning on,
that is, only record menstrual period, pregnant period, treasure mother
period, then enter the second period and select your own basic
information.
Battery icon status description
About the Waterproof
- The waterproof grade of the bracelet is IP68, which means protection against dust inhalation; protection for short immersion.
- The activity scenes it allows are as follows: Swear it ina rainy days and wash faces and hands, wear it for swimming and up to 3 meters diving
- Please do not wear a bracelet to swim in the sea or take a hot shower
Product parameters
This device complies with A Part 15 of the FCC Rules. The operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. –
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Improper use, such as replacing batteries would cause the risk of explosion!
Please dispose of used batteries properly. Used batteries must not be treated
with residual waste and must be disposed of separately. Dealing with the used
batteries at common sites personally is free. The owner of the old battery is
responsible for carrying these batteries to the sites or similar places You
will help to recycle valuable raw materials and toxic substances through this
little personal effort.
Q: Received this fitness tracker watch but it’s only giving me time in
digital, how do you get around an old-style clock face?
A: Please connect the tracker with your phone, open the APP(H Band) and then
choose: Settings – My deviceY99- More – Settings of main interface style Style
2.
Q: How to get the automatic blood pressure monitor?
A: Settings – My deviceY99- More Switch setting – BP automatic monitoring Also
you can switch on the Bp private mode, and set your personal-tailored BP mode
to obtain more accurate data.
Warm Tip
You can get more information on APP(H Band), just open the APP connect the
tracker with your phone, scroll down on the Dashboard, and look for more data
history about your Sport, Sleep, Heart rate, and Blood pressure. Also can set
your tracker by choosing: Settings My device Y99-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>