netvue NA-2000 Birdfy Photo Kit User Manual

netvue NA-2000 Birdfy Photo Kit

Product Information

Specifications

• Supported device: 4.0-6.3 inch
• Maximum load: 0.66 lbs
• Stationary thickness: 2.75 inch
• Product length: 33.46 inch
• Material: Aluminum Alloy + ABS + Silicone + PVC

Product Usage Instructions

Paring
To pair the Bluetooth remote control with your phone, follow these steps:

1. Press the ON/OFF button to turn on the remote control. The LED light will start flashing quickly, indicating that the control has entered pairing mode.
2. Enable the Bluetooth function on your phone and search for available devices.
3. Select “AB Shutter3” from the list of available devices, and the pairing process will be completed automatically within a few seconds.

Shooting
To take a photo using the remote control:

• Open your camera app.
• If you are using an iOS device, press Button A on the remote control.
• If you are using an Android device, press Button B on the remote control.

Adjustable Clamp

To adjust the clamp opening:
Turn the handle counterclockwise to adjust the clamp opening.

Adjustable Holder

To clip your phone:
Press down on the clip and insert your phone. Please take care to avoid clipping on the buttons on the side of your phone.

Attention:
Please do not bend the gooseneck at a large angle frequently.

FAQ

• Q: What devices are supported by the Bluetooth remote control?
  A: The Bluetooth remote control supports devices with a screen size ranging from 4.0 to 6.3 inches.

• Q: What is the maximum load the adjustable clamp can hold?
  A: The adjustable clamp can hold a maximum load of 0.66 lbs.

• Q: How long is the product?
  A: The product length is 33.46 inches.

• Q: What materials is the product made of?
  A: The product is made of Aluminum Alloy, ABS, Silicone, and PVC.

• Q: Can I bend the gooseneck at a large angle frequently?
  A: No, please avoid bending the gooseneck at a large angle frequently.

Adjustable Clamp

Adjust the clamp opening by turning the handle counterclockwise.

Fix the clamp position by turning the handle clockwise.

Adjustable Holder

360-degree Rotational Phone Clip.

How to Clip Your Phone

Press down on the clip and insert your phone. Please take care to avoid clipping on the buttons on the side of your phone.

Bluetooth Remote Control

How to Use the Remote Control

1. Paring

   • Press the on/off button to turn on the remote control. The LED light will start flashing quickly, indicating that the control has entered pairing mode.
   • Enable the Bluetooth function on your phone and search for available devices.
   • Select “AB Shutter3” from the list of available devices, and the pairing process will be completed automatically within a few seconds.

2. Shooting
   To take a photo using the remote control:

   • Open your camera app.
   • If you are using an iOS device, press button A on the remote control.
   • If you are using an Android device, press button B on the remote control.

Specifications

| Supported device| Maximum load| Stationary thickness| Product length
---|---|---|---|---
4.0-6.3 inch| ≤0.66 lbs| 2.75 inch| 33.46 inch
Material: Aluminum Alloy + ABS + Silicone + PVC
Attention: Please do not bend the gooseneck at a large angle frequently.

FCC Statement

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure without restriction.

• support@netvue.com
• 1(866)749-0567
• netvue.com.
• 240 W Whitter Blvd Ste A, La Habra, CA 90631

© Netvue Inc.

References

• Bird Feeder Camera | Baby Monitor and Home Security Camera – netvue

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>