KLOCK Werks Motorcycle Handlebar Mount User Manual
- October 30, 2023
- KLOCK Werks
Table of Contents
KLOCK Werks Motorcycle Handlebar Mount
Product Information
The iOmounts Motorcycle Handlebar Mount is a device that allows you to securely mount your smartphone or other smart devices onto your motorcycle. The system includes an iOdiscTM, which is a small magnetic disc that adheres to the back of your device, an iOcoreTM, which is a magnetic component that attaches to the handlebar mount, and a device tether for added security. The iOcoreTM is available in multiple colors, allowing you to customize the look of your mount. The system is compatible with most smartphones and other smart devices.
Product Usage Instructions
-
Watch the video: Before using the iOmounts Motorcycle Handlebar Mount, it is recommended to watch the instructional video provided on GetKlocked.com. The video provides detailed instructions on how to adhere the iOdiscTM correctly to ensure a secure fit.
-
Adhere the iOdiscTM: Clean the surface of your device case and allow it to dry. Center the iOdiscTM on your case and apply firm pressure while on a flat surface to adhere it. Allow adhesive to set for at least 24 hours before attaching it to the iOcoreTM. For best results, let it set for 72 hours before first
use. -
Install the Semisphere bracket: Remove two bolts from the stock controls and line up the mount. Use the included hardware to tighten and follow factory torque specs.
-
Attach the device: Snap your phone or smart device into place in your case. Place the tether tab through the charging port and attach the lanyard to the tether tab for added security.
-
Follow state laws: When riding or driving, it is important to follow your state laws regarding device use. The iOmounts Motorcycle Handlebar Mount should not be used with full-size tablets or other larger devices on model-specific, nomadTM, nomadXLTM, or nomad+TM mounts.
SCAN HERE
Learn how to adhere the iOdisc™ correctly to guarantee a wonderful experience. GETKLOCKED.COM/HOW-TO
COMPONENTS
- KEEP EXTRAS ON HAND! Once an iOdisc is adhered to a device, it can readily use the iOmounts system.
- CUSTOMIZE YOUR LOOK The magnetic iOcore™ (the powerhouse in this system) is available in multiple colors.
DEVICE TETHER
The Device Tether can be used with almost any smartphone to give an added sense of security and piece of mind when using or mounting your smart device.
- Place tether tab through charging port.
- Snap phone back in place in your case.
- Attach lanyard to tether tab and GO!
INSTALLATION
When adhering the iOdisc™ allow adhesive to set at least 24 hours before attaching to iOcore. For best results, let set 72 hours before first use.
-
ADHERE
Clean the surface of your device case and allow to dry. Center the iOdisc™ on your case then apply with firm pressure to the case while on a flat surface and adhere. -
INSTALL
The Semisphere bracket bolts to the stock controls. Remove 2 bolts from the controls, line up the mount, and use the included hardware to tighten. Follow factory torque specs. -
ATTACH
Once the iOdisc™ has cure for 24 hours, your device is ready to be attached to any iOmount®!
A FEW TIPS AND TRICKS
- We do not recommend using full-size tablets or other larger devices on model-specific, nomad™, nomadXL™, or nomad+™ mounts.
- While a very strong 3M VHB adhesive is used, the iOdisc™ will not stick to all surfaces and materials. This includes rubber, silicon, soft-touch and other soft and/or textured surfaces.
- For best results, Klock Werks recommends the use of a smooth plastic, non-silicone case.
- Each iOdisc™ utilizes permanent adhesive and is very difficult to remove once applied. Klock Werks and/or iOmounts™ are not responsible for any damages caused by the removal of the iOdisc™.
WARNING : When riding or driving, please follow your state laws regarding device use.
QUESTIONS?
DON’T HESITATE TO REACH OUT
WEBSITE
GetKlocked.com
EMAIL
info@getklocked.com
CALL
(605) 996-3700
CONNECT TO EVEN MORE
Connect to stands, wall mounts, car mounts and more. Find it all at:
GETKLOCKED.COM
SHARING IS CARING! LIKE, TAG OR SHARE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>