B&C Speakers 10NW64-8 Studio Woofer User Manual
- June 13, 2024
- B&C Speakers
Table of Contents
B&C Speakers 10NW64-8 Studio Woofer
When it comes to delivering exceptional audio experiences, one name that stands out is B&C Speakers. Renowned worldwide for their professional loudspeaker transducers, B&C Speakers has consistently raised the bar in the realm of audio technology. Their 10NW64-8 Studio Woofer is no exception, offering a powerhouse of sound in a compact package.
Introduction
The B&C Speakers 10NW64-8 Studio Woofer is a testament to the brand’s dedication to audio excellence. Whether you’re a professional sound engineer, a car audio enthusiast, or simply someone who appreciates top-notch sound quality, this woofer will elevate your audio experience to new heights. Unleash the power of sound with B&C Speakers.
Specifications
- Brand: B&C Speakers
- Model Name: B&C Speakers
- Speaker Type: Subwoofer
- Special Feature: Waterproof
- Subwoofer Diameter: 10 Inches
- Continuous Program Power Capacity: 600 Watts
- Voice Coil Diameter: 64 mm (2.5 in)
- Impedance: 8 Ω
- Minimum Impedance: 6.5 Ω
- Nominal Power Handling: 300 W
- Sensitivity (1W/1m): 96.0 dB
- Frequency Range: 60 – 2500 Hz
- Winding Material: Copper
- Former Material: Glass Fibre
- Winding Depth: 16.0 mm (0.62 in)
- Magnetic Gap Depth: 8.0 mm (0.31 in)
- Flux Density: 1.25 T
- Surround Shape: Double Roll
- Cone Shape: Exponential
- Magnet Material: Neodymium Inside Slug
- Spider: Single
- Pole Design: Straight Pole
- Woofer Cone Treatment: TWP Waterproof Both Sides
- Recommended Enclosure: 26.0 dm3 (0.92 ft3)
- Recommended Tuning: 59 Hz
- Overall Diameter: Double Roll
- Bolt Circle Diameter: Exponential
- Baffle Cutout Diameter: Neodymium Inside Slug
- Flange and Gasket Thickness: Straight Pole
- Air Volume Occupied by Driver: TWP Waterproof Both Sides
- Net Weight: 26.0 dm3 (0.92 ft3)
- Shipping Units: 59 Hz
- Shipping Weight: Copper
- Shipping Box: Glass Fibre
- Date First Available: August 2, 2023
- Speakers Maximum Output Power: 600 Watts
- Number Of Items: 1
Features
- High Power Handling: The woofer boasts a continuous program power capacity of 600 watts, ensuring robust and dynamic sound reproduction.
- Large Voice Coil Diameter: With a 64 mm (2.5 in) copper voice coil, this woofer can handle high power levels while maintaining excellent heat dissipation.
- Wide Frequency Range: The woofer offers a broad frequency response ranging from 60 to 2500 Hz, making it versatile for various audio applications.
- Impressive Sensitivity: With a sensitivity of 96.0 dB (1W/1m), this woofer efficiently converts power into sound, delivering clear and loud audio.
- Neodymium Magnet: The woofer features a neodymium magnet inside a slug, which provides a powerful yet lightweight motor assembly, enhancing overall performance.
- Extended High-Frequency Response: Equipped with a shorting copper cap, this woofer extends its high-frequency response, ensuring clarity in audio reproduction.
- Reduced Power Compression: The ventilated voice coil gap design minimizes power compression, allowing the woofer to handle continuous high-power output without distortion.
- Durable Construction: Designed with a double roll surround shape and an exponential cone shape, the woofer is built to withstand demanding conditions while maintaining sound quality.
- Waterproof Woofer Cone Treatment: Both sides of the woofer cone are treated with TWP waterproofing, making it suitable for various environments and applications.
- Recommended Enclosure and Tuning: The woofer comes with recommendations for enclosure size (26.0 dm3 or 0.92 ft3) and tuning (59 Hz), providing guidance for optimal performance.
- Easy Installation: The woofer’s design is suitable for a range of applications, from motorcycles to car audio systems, making it versatile and easy to integrate into your setup.
- Proven Brand: B&C Speakers is a renowned name in the audio industry, known for producing high-quality transducers and components for professional audio systems.
The B&C Speakers 10NW64-8 Studio Woofer combines power, precision, and durability, making it an excellent choice for audiophiles, musicians, and professionals seeking exceptional sound quality in their audio systems.
Product Usage Instructions
The B&C Speakers 10NW64-8 Studio Woofer is designed to deliver exceptional audio performance in a variety of applications. To ensure that you get the best results from this woofer, follow these usage instructions:
- Selecting the Right Enclosure: Before installation, choose or build an enclosure that matches the recommended specifications provided by the manufacturer. The recommended enclosure for the 10NW64-8 is 26.0 dm3 (0.92 ft3), and the recommended tuning frequency is 59 Hz. Building or selecting the right enclosure is crucial for achieving optimal sound quality.
- Handling and Installation:
- Handle the woofer with care to avoid damaging the cone, voice coil, or other components. When installing, ensure the speaker is positioned securely within the enclosure.
- Make sure that the woofer is mounted correctly, following the instructions provided in the user manual or by the manufacturer.
- Wiring and Connections:
- When connecting the woofer to an amplifier or other audio source, ensure that the wiring is secure and the connections are tight.
- Pay close attention to the polarity of the connections, ensuring that the positive (+) terminal of the woofer is connected to the positive terminal of the amplifier, and the same for the negative (-) terminals. Incorrect polarity can affect sound quality.
- Power Handling: Be mindful of the power handling capacity of the woofer. The 10NW64-8 is capable of handling 600 watts of continuous program power. Avoid exceeding this power limit to prevent damage to the speaker.
- Sound Tuning: Adjust the settings on your amplifier or audio system to optimize the sound output of the woofer. Experiment with equalizer settings to achieve the desired sound quality.
- Environmental Considerations: While the woofer features a waterproof cone treatment, it’s still essential to protect it from excessive moisture and direct exposure to the elements.
- Regular Maintenance: Periodically inspect the woofer for any signs of wear or damage. Clean the speaker grille and cone gently to remove dust or dirt that may accumulate over time.
- Break-In Period: Like many high-quality speakers, the 10NW64-8 may benefit from a break-in period where the speaker is used at moderate volumes for several hours. This can help improve the speaker’s performance over time.
- Enjoy the Audio Experience: Finally, sit back and enjoy the exceptional audio experience that the B&C Speakers 10NW64-8 Studio Woofer provides. Whether you’re using it for professional sound applications or enhancing your car audio system, this woofer is designed to deliver powerful and clear sound.
Troubleshooting Guide
If you encounter issues with your B&C Speakers 10NW64-8 Studio Woofer, use the following troubleshooting guide to identify and potentially resolve common problems. Remember to exercise caution and consult the manufacturer’s guidelines before attempting any repairs.
Issue 1: No Sound or Low Sound Output
Possible Solutions:
- Check Wiring Connections:
- Ensure that the wiring connections between the woofer and your amplifier or audio source are secure and correctly connected. Verify that the polarity (positive and negative) is correct.
- Amplifier Settings:
- Review your amplifier or audio system settings to ensure they are configured correctly. Check volume levels, balance, and equalizer settings.
- Verify Power Supply:
- Ensure that your amplifier or audio source is providing adequate power to the woofer. Make sure the amplifier is powered on and functioning correctly.
- Speaker Damage:
- Visually inspect the woofer for any visible damage to the cone, voice coil, or other components. If damage is present, contact the manufacturer or a professional technician for repair or replacement.
Issue 2: Distorted Sound or Clipping
Possible Solutions:
- Power Management:
- Avoid overdriving the woofer with excessive power. Exceeding the recommended power handling capacity can cause distortion and damage. Adjust your amplifier settings accordingly.
- Equalizer Adjustments:
- Experiment with the equalizer settings on your amplifier or audio system. Reduce any extreme boost or cut levels in the frequency response that may lead to distortion.
- Enclosure Tuning:
- Ensure that the woofer is installed in an enclosure that matches the recommended specifications. Incorrect enclosure tuning can lead to distortion. Adjust the enclosure if necessary.
- Check Source Material:
- Verify that the audio source material you are playing is of good quality and not inherently distorted. Test the woofer with different audio sources to rule out source-related issues.
Issue 3: Rattling or Vibrations
Possible Solutions:
- Loose Mounting:
- Inspect the mounting of the woofer within its enclosure. Ensure that it is securely fastened and that there are no loose parts or screws causing vibrations.
- Enclosure Design:
- Review the design of the enclosure to ensure it is structurally sound and properly constructed. Weak or poorly designed enclosures can lead to rattling.
- Inspect Cone and Surround:
- Visually inspect the woofer cone and surround for any signs of damage or wear. Replace the woofer if you notice any issues.
- Enclosure Padding:
- Consider adding damping materials within the enclosure, such as acoustic foam or polyfill, to reduce vibrations and resonances.
Issue 4: Uneven Sound Balance
Possible Solutions:
- Check Wiring Polarity:
- Verify that the positive and negative wires are connected correctly. Inverted polarity can lead to uneven sound balance.
- Speaker Placement:
- Ensure that the woofer is properly positioned within the room or vehicle. Experiment with its placement to achieve balanced sound distribution.
- Room Acoustics:
- If using the woofer indoors, consider room acoustics. The uneven sound may be caused by acoustic reflections and absorption in the room. Adjust room layout or use acoustic treatments if needed.
- Amplifier Balance:
- Check the balance settings on your amplifier or audio system. Ensure that the balance control is centered.
FAQs
What sets the B&C Speakers 10NW64-8 Studio Woofer apart from other woofers on the market?
The 10NW64-8 Studio Woofer stands out due to its exceptional power handling (600 watts), wide frequency range (60 - 2500 Hz), and neodymium magnet inside a slug, which provides both power and lightweight performance.
Can this woofer be used in car audio systems?
Yes, absolutely! Its versatile design makes it suitable for various applications, including car audio systems. Ensure proper installation and enclosure for optimal performance.
Is the woofer waterproof?
Yes, the woofer features a waterproof cone treatment on both sides, making it suitable for use in various environments, including marine applications.
What is the recommended enclosure size and tuning frequency for this woofer?
The recommended enclosure size is 26.0 dm3 (0.92 ft3), and the recommended tuning frequency is 59 Hz. Following these guidelines will help you achieve the best sound quality.
How should I handle and install the woofer to prevent damage?
Handle the woofer with care to avoid damaging the cone, voice coil, or other components. When installing, ensure the speaker is securely positioned within the enclosure and mounted correctly.
What should I do if I encounter distorted sound or clipping while using this woofer?
Avoid overdriving the woofer with excessive power and experiment with equalizer settings on your amplifier or audio system. Also, ensure that the enclosure is correctly tuned to prevent distortion.
Can I use this woofer in outdoor environments with exposure to moisture?
While the woofer features waterproof cone treatment, it's essential to protect it from excessive moisture and direct exposure to the elements for long-term durability.
How can I optimize the sound output of this woofer?
Adjust the settings on your amplifier or audio system to optimize the sound output. Experiment with equalizer settings and consider a break-in period to enhance performance gradually.
What do I do if I encounter uneven sound balance when using this woofer?
Check wiring polarity to ensure correct connections, experiment with speaker placement, consider room acoustics, and verify amplifier balance settings to achieve balanced sound distribution.
What is the purpose of the neodymium magnet inside the woofer, and how does it affect performance?
The neodymium magnet provides a powerful yet lightweight motor assembly, enhancing the woofer's overall performance. It contributes to better efficiency and power handling, allowing for clear and dynamic sound reproduction.
Can I use this woofer for professional sound applications, such as live events or studio recording?
Yes, the 10NW64-8 Studio Woofer is designed for professional use and is suitable for live events, studio recording, and other professional sound applications.
Are there any specific amplifier recommendations for this woofer, or is it compatible with a wide range of amplifiers?
This woofer is compatible with a variety of amplifiers. However, it's essential to ensure that your amplifier's power output matches the woofer's specifications to avoid underpowering or overpowering.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>