B C SPEAKERS WGX980TN 1.4 Inches Line Array Sources User Manual
- June 4, 2024
- B C SPEAKERS
Table of Contents
WGX980TN
8Ω
Line Array Sources – 1.4 Inches
User Manual
- Line Array optimized Waveguide with DE980TN driver
- 120° max horizontal coverage
- 220 W continuous program power capacity
- 75 mm (3 in) CCAW voice coil
- Titanium diaphragm
- 500 – 18000 Hz response
- 108.5 dB sensitivity
- Neodymium magnet assembly with shorting copper cap
Waveguide horns are not sold separately
SPECIFICATIONS
Horizontal Coverage
Active Radiating Factor1
Recommended Crossover
Waveguide Material
Nominal Impedance
Minimum Impedance2
Nominal Power Handling3
Continuous Power Handling4
Sensitivity5
Frequency Range
Voice Coil Diameter
Winding Material
Diaphragm Material
Flux Density
Magnet Material| 120 ° Max
93.7 %
0.8 kHz
Cast Aluminium
8 Ω
8.0 Ω
110 W
220 W
108.5 dB
1.0 – 18.0 kHz
75 mm (3.0 in)
CCA
Titanium
2.05 T
neodymium Ring
---|---
MOUNTING AND SHIPPING INFO
Exit Size
Driver Diameter
Dimensions
Net Weight
Shipping Units
Shipping Weight
Shipping Box| 153×25 mm (6×1 in)
131 mm (5.16 in)
163x130x235 mm (6.4×5.1×9.3 in)
3.3 kg (7.28 lb)
1
3.4 kg (7.5 lb)
245x140x175 mm (9.6×5.5×6.9 in)
---|---
- 12 dB/Oct. Or higher slope high-pass filter.
- 2-hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Waveguide mounted on 90°x10° bell horn
B &C Speakers s.p.a.
Via Poggiomoro, 1 – Loc. Vallina, 50012 Bagno a Ripoli (FI) – ITALY – Tel.
+39 055 65721 – Fax +39 055 6572312 –
[email protected]
Documents / Resources
| B C
SPEAKERS WGX980TN 1.4 Inches Line Array
Sources
[pdf] User Manual
WGX980TN 1.4 Inches Line Array Sources, WGX980TN, 1.4 Inches Line Array
Sources, Line Array Sources, Array Sources, Sources
---|---