Shenzhen FT02 Smart Watch User Manual

Shenzhen FT02 Smart Watch

The pictures are for reference only, please refer to the actual product (including but not limited to color, size, screen display, etc.)

Quick Start

1. Screen
2. Knob (on and off screen, return to
3. Button, wake up screen, return, enter menu)
4. Heart rate
5. SCharging POGO PIN
6. Buckle
7. Strap

• When using the watch for the first time, make sure that the watch is fully charged, if the battery is low and cannot be turned on Please fully charge the watch first, the charging time is about 2 hours.
• Make sure the charging pins on the charging cable are properly seated on the back of the smartwatch on the charging pin of the user cable, and then plug the other end of the user cable into the power source
• Scan the QR code below to install the APP, and install the “APP” application.

Use any browser to scan the code and download it directly

• Turn on Bluetooth on the smartphone, and then open the “APP” application on the phone
• Click “Connect Device” on the APP device interface, and a search interface will appear. Select the corresponding Bluetooth name of the watch to connect. (To unbind, you can directly click Unbind on the device page.)

Function

Dial
Press and hold on the watch face interface to choose to change the watch face

Steps
The watch will automatically record your daily activities, click on the touch screen to view more detailed data.

Heart rate/blood oxygen
Enter the heart rate/blood oxygen interface, and the watch will automatically test your heart rate/blood oxygen. Swipe to the right to exit.

Sports
The sports smartwatch has multiple sports modes, choose one sport to exercise, After completing the exercise, slide to the right to stop the exercise and save the exercise data. If you have connected your smartwatch to the app through Bluetooth, you can view your exercise data in the app.

If you want to pause or end the movement, you can swipe the screen left or right to pause or end the current movement.

Note: If the practice time is short, the data will not be saved.

Sleep monitoring

• When the watch generates sleep data, it will display the sleep data on the interface at this time. When sleep stops, the watch will display your total sleep, light sleep, and deep sleep time on the sleep interface. After syncing with the APP, you can view a more detailed sleep report.

Information
After connecting the APP to enable message push, unread messages will be displayed in the message interface, slide up and down to view the message list, and click the message list to enter the message details.

Alarm clock
In the “Alarm Clock” interface, click to add an alarm clock, and click the corresponding alarm clock to enter the alarm edit page, the watch will vibrate when the alarm time is up.

Stopwatch
In the “Alarm Clock” interface, click to add an alarm clock, and click the corresponding alarm clock to enter the alarm edit page, the watch will vibrate when the alarm time is un. Weather
After connecting the “app”, turn on the location permission, and the weather will be automatically pushed to the watch.

Sedentary reminder
Tum on or off the sedentary reminders you have set up in the app on this page.

Music controll
Click the music function icon to enter the music playback interface. In the music interface, you can control the music playback of the mobile phone, you can select the previous/next song or play/pause the song.

Set up
In the “Settings” interface, you can perform various settings on the watch, including finding phone numbers, screen brightness, screen on time, language, reset, shutdown, system, etc.

Find phone
Once connected to the app, click the Find Phone feature in the dropdown menu or settings and the phone will ring/vibrate.

Switch dial
Touch “Switch Watch Faces” on the screen to choose another watch face.

Language
Select the Multilingual feature on Settings, and then have the option to switch the watch to another language.

Reset
Reset to factory default settings.

Note : All user data will be deleted if factory reset Touching “Power Off” on the screen will turn off the watch.

System
On the system page, you can view the Bluetooth name and firmware version information of the watch.

Sleep mode
When the sleep mode is turned on, the system Bluetooth will be turned off, and the watch will not receive information

Audio setup
On this page, you can set the audio playback source of the watch

Warranty

Warranty Policy

• Thank you for purchasing our product. When you experience any non-human damage performance failure during the use of the product, you can enjoy the “guaranteed repair, return and replacement” (referred to as “three guarantees*) service of Busee, promise.
• To protect your rights and interests, please keep the three-guarantee certificate and the issued invoice properly after purchasing our product. The validity period of the three guarantees of the product will be calculated from the date you receive the product (hereinafter referred to as “receipt”), and the validity period of the three guarantees of the product is 12 months.

Three Guarantees Service Content

1. Within 7 days from the date of receipt, to ensure that the received goods are in good condition, the product packaging and accessories are complete, and there is no performance failure caused by artificial damage, the payment for the goods can be refunded at one time according to the invoice price, or the products of the same model and specification can be replaced. or free maintenance.
2. From the 8th day to the 15th day from the date of receipt, if the product has a performance failure that is not damaged by human beings, the product of the same model and specification can be replaced. Product replacement is the responsibility of the seller.
3. Within the validity period of the Three Guarantees, if the product still cannot be used normally after two product replacements, and confirmed by the noise test, you can choose
4. to repair or replace the same model and the same specification with the valid replacement record provided by the seller in the Three Guarantees. product. Product replacement is the responsibility of the seller.

How to Get Three Guarantees Service
To ensure your legitimate rights and interests, you need to go to the seller to enjoy the three-guarantee service.

When you request the Three Guarantees service, you need to provide:

1. The original of the purchased product;
2. The original invoice when purchasing the product or the proof of purchase record from the seller;
3. A valid three-guarantee certificate.

How to Get Three Guarantees Service
To ensure your legitimate rights and interests, you need to go to the seller to enjoy the three-guarantee service.
When you request the Three Guarantees service, you need to provide:

1. The original of the purchased product;
2. The original invoice when purchasing the product or the proof of purchase record from the seller;
3. A valid three-guarantee certificate.

Circumstances that are not covered by the warranty service

• The product exceeds the validity period of three packs;
• There is no Three Guarantees certificate and valid invoice, and it is impossible to prove that the purchased products are within the validity period of the Three Guarantees;
• The warranty certificate does not match the product model identification or the warranty certificate has been altered;
• Damage caused by not using, maintaining, and maintaining according to the requirements of the “Instruction Manual”, or using non-original accessories
• Unauthorized repair, alteration, misuse, bump, drop, crush, liquid entry, corrosion;
• Tearing, altering, or illegible product labels, seals, and serial numbers (SN);
• Dad, ire, ligening force majeure such as
• Defects due to normal wear or normal aging of the product;

Paid service guarantee

If the product does not meet the warranty conditions and needs to be charged, will calculate the appropriate maintenance fee according to the cost of parts and labor, and propose a suitable maintenance quotation to You for your product Procon mmountedpaying the services.

Warranty Card

The above information is filled in by the seller

FCC

FCC WARNING
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment is not installed and used in acceptance with Send, if instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general! RF exposure requirement. The device can be used in portable exposure conditions without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>