itC T-S708 POE Ceiling Speaker Owner’s Manual
- October 30, 2023
- ITC
Table of Contents
POE Ceiling Speaker
T-S708
itC T-S708 POE Ceiling Speaker
Product Introduction:
- Professional integrated Ceiling-type network audio decoding speaker, built-in digital constant resistance power amplifier and high fidelity loudspeaker.
- It can installed in rooms, offices and guest rooms where music needs to be played at designated locations.
Features:
- Embedded computer technology and DSP audio processing technology are used in the equipment.
- Built-in 1-channel network hardware audio decoding module, supports TCP/IP, UDP protocol, realizes the network transmission of 16-bit CD audio signal.
- Supporting POE (IEEE 802.3af) power supply mode, only one network cable is needed to connect to POE switch. The construction is simple and convenient, and the maximum connection distance can reach 80 meters.
- Equipped with DC 24V standby power interface, it is suitable for power supply when power demand is greater than 10W or for non-POE network.
- Digital power amplifier with intelligent gain adjustment, adaptive power supply and automatic power adjustment is always in the state of performance optimization and efficiency maximization.
- Full-band, high-sensitivity amplifier unit, with abundant power, high fidelity sound quality, with flame-retardant metal rear cover, durable, fire-proof and safer.
- Support LAN and WAN applications, compatible with any network architecture such as router, switch, bridge gateway, Modem, Internet, 2G, 3G, 4G, etc.
- Supporting the broadcasting system to upgrade the terminal firmware remotely, without upgrading to the terminal locally, so as to reduce the work intensity of maintenance.
Specifications:
| Model | T-S708 |
|---|---|
| Network interface | Standard RJ45 input |
| Support agreement | TCP/IP, UDP |
| Audio format | MP3 |
| Sampling rate | 8KHz ~ 48KHz |
| Transmission speed | 100Mbps |
| Audio mode | 16-bit CD sound quality |
| Frequency response | 130Hz~16KHz +/-6dB |
| Harmonic distortion | Less than 1% |
| Signal-to-noise ratio | More than 68dB |
| Rated power | 8W (POE) / 8W |
| Power waste | 12W / 12W |
| Loaded horn | 8 ohm /6W |
| Speaker attribute | Woofer |
| Power Supply | POE (IEEE 802.3af)/DC24V 2A |
| Standby power | < 3W |
| Power Protection Circuit | Overvoltage and Overcurrent Protection |
| Working temperature | 5℃~40℃ |
| Working humidity | 20%-80% relative humidity, no condensation |
| Installation dimension | 152mm |
| Size | 180 x 98mm |
| Weight | 0.8Kg |
www.itctech.com.cn
info@itc-pa.com.cn
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>