CPXTW LED PANEL Tunable White Configurable User Manual

CPXTW LED PANEL Tunable White Configurable

FEATURES & SPECIFICATIONS

INTENDED USE
 The CPXTW Series LED is a low-glare back-lit panel featuring an external driver. This cost-effective, reliable flat panel is visually comfortable and can be recessed mounted. Suitable for many applications such as schools, offices, retail, convenience stores, hospitals, healthcare facilities and other commercial spaces. Certain airborne contaminants can diminish the integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. U.S. Patent No. 10,681,784.

CONSTRUCTION
The extruded aluminum frame with satin white lens provides excellent shielding and uniform luminance. CPX’s low-profile design provides increased installation flexibility, especially in restricted plenum spaces. The back plate includes integral T-bar clips for installation into T-grid ceilings.

ELECTRICAL
Direct-lit Panel with Long-Life LEDs, coupled with a high-efficiency driver, provide superior illumination for extended service life. Greater than 70% LED lumen maintenance at 60,000 hours (L80>60,000). CPXTW offers 6 different lumen packages ranging from 2000 to 6000 lumens.
This fixture offers flicker free dimming with capability to dim to 1%. Driver disconnect provided where required to comply with US and Canadian codes.
Tunable white nTune™ is an all-digital light color temperature control within an nLight enabled luminaire. This brings tunable white lighting control into the mainstream with repeatable, consistent results in an economical luminaire form and system already familiar to schools. Designers and facility operators are granted the freedom to tie scenes to specific activities or to complement colors or materials within a visual environment. nTune™ allows color temperature settings through the Productivity Range of 3000K-5000K and the Rhythm Range of 2700K to 6500K. Refer to the Programming User’s Guide for instructions on customizing to your application with SensorView.
Integrated Sensor (nLight Wired Networking): This sensor is nLight-enabled, meaning it has the ability to communicate over an nLight network. When wired, using CAT-5 cabling, with other nLight-enabled sensors, power packs, or WallPods, an nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software.

LISTINGS
CSA certified to meet US and Canadian standards. Damp location listed. IC rated. IP5X Rated.

BUY AMERICAN ACT
Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please refer to www.acuity-brands.com/buy-american for additional information.

WARRANTY
5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and- conditions

Note : Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Tunable White GPHD

• Gamut: One dimensional
  Warm-Cool

• Path: Direct 3000K to 5000K
  (Productivity Range) or 2700K to 6500K (Rhythm Range)

• Handle: Two Natural Language
  Handles: Intensity and CCT

• Data: nLight with nTune technology for both handles of control

Embed nLight controls today. Prepare for tomorrow.

Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control networks when ordered with drivers marked by a shaded background*
• This luminaire is part of an A+ Certified solution for nLight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus

ORDERING INFORMATION

Series| Fixture Dimension| Dynamic Feature| Dynamic Range| Lumen Output| CRI| Diffuser
---|---|---|---|---|---|---
CPXTW LED Panel

Tunable White

| 1X4 ** 1′ X 4′| TUWH ** Tunable White| PROR Productivity range (3000-5000K)

RHYR Rhythm range

(2700-6500K)

| 2000LM Nominal 2000 lumens 3000LM Nominal 3000 lumens 4000LM Nominal 4000 lumens 5000LM ** Nominal 5000 lumens| 80CRI 80 CRI| SWL ** Satin White

A12 **** Prismatic A12 Pattern

2X2 ** 2′ X 2′| 2000LM Nominal 2000 lumens 3000LM Nominal 3000 lumens 4000LM ** Nominal 4000 lumens
2X4 ** 2′ X 4′| 3000LM Nominal 3000 lumens 4000LM Nominal 4000 lumens 5000LM Nominal 5000 lumens 6000LM ** Nominal 6000 lumens
Voltage| Emergency Option| Control Interface Type| Networked Controls| Options
---|---|---|---|---
MVOLT 120

277

347

| 120-277V

120V

277V

347V ‡

| (blank) E10WLCP

E7W GTD

| no battery

EM Self-Diagnostic battery pack, 10W Constant Power, CEC compliant

7W, noncompliant with CA T20

Generator Transfer Device

| NLT **** nLight no constant lumen management

NLTEMG nLight no constant

lumen management. For use with generator supply EM power.

| (blank)

PIR

PDT

APIR

APDT

| No sensor

Occ sensing with passive infrared – on/off functionality

Occ sensor dual tech (passive infrared & microphonics)

Occ sensing with passive infrared

– on/off functionality and auto dimming photocell

Occ sensor dual tech (passive
infrared & microphonics) and auto
dimming photocell

| BAA GLR GMF

PWS1836 PWS1846

DWAM NPLT

| Buy America(n) Act Compliant Fast-blowing fuse ‡

Slow-blowing fuse ‡

6′ pre-wire, 3/8″ diameter, 18 gauge, 1 circuit ‡

6′ pre-wire, 3/8″ diameter, 18 gauge, 2 circuit ‡

Anti-Microbial paint Narrow Pallet

NOTE : ‡ indicates option chosen has ordering restriction or note. Please reference restrictions/notes chart below. Restriction notes are sorted in the sequence they appear in the order tree.

‡ Option Value Ordering Notes/ Restrictions

Option value| Restriction
347| 347 not available with E10WLCP, E7W, and GTD options.
PWS1836| Not available with E10WLCP or E7W.
PWS1846| Only available with E10WLCP or E7W.
GLR, GMF| Must specify voltage. 120 or 277, with GLR and GMF fusing.

ACCESSORIES

Accessories: Order as separate catalog number.
ILBLP CP10 HE SD A| IOTA 10 Watt Constant Power, High Efficiency LED Emergency Driver for CA Title 20 ‡| PAC 4DF 36

PAC 2DNF 72

PAC 2DF 72

PAC 4DNF 72

PAC 4DF 72

RK8BDP 2P U RK8BDP 3P U RK8BDP 2P J10 RK8BDP 2P J40

| Panel Air Craft Kit, 4 cables, with Power Feed, 36 inches. Recommended for 2X4 or 2X2 or 1X4 Panel Fixtures. 1

Panel Air Craft Kit, 2 cables with Y splitter, No Power Feed 72 inches. Recommended for 2X2 or 1X4 Panel Fixture.

Panel Air Craft Kit, 2 cables with Y splitter, with Power Feed, 72 inches. Recommended for 2X2 or 1X4 Panel Fixture. 1

Panel Air Craft Kit, 4 cables, No Power Feed, 72 inches. Recommended for 2X4 or 2X2 or 1X4 Panel Fixtures.

Panel Air Craft Kit, 4 cables, with Power Feed, 72 inches. Recommended for 2X4 or 2X2 or 1X4 Panel Fixtures. 1

Disconnect Plug (BDP), 2 Pole, Package of 1 Disconnect Plug (BDP), 3 Pole, Package of 1 Disconnect Plug (BDP), 2 Pole, Package of 10 Disconnect Plug (BDP), 2 Pole, Package of 40

ELA PSDMT| Remote mount tray for ILBLP battery.
DGA14| Drywall grid adapter for 1×4 recessed fixture.
DGA22| Drywall grid adapter for 2×2 recessed fixture.
DGA24| Drywall grid adapter for 2×4 recessed fixture.
1X4SMKSH| Multi-Use Surface Mount Kit 1×4, Shallow Depth
2X2SMKSH| Multi-Use Surface Mount Kit 2×2, Shallow Depth
2X4SMKSH| Multi-Use Surface Mount Kit 2×4, Shallow Depth
1X4SMKSHP PAF| Multi-Use Surface Mount Kit 1X4 Post-Paint
2X2SMKSHP PAF| Multi-Use Surface Mount Kit 2X2 Post-Paint
2X4SMKSHP PAF| Multi-Use Surface Mount Kit 2X4 Post-Paint
PAC 2DNF 36| Panel Air Craft Kit, 2 cables with Y splitter, No Power Feed, 36 inches. Recommended for 2X2 or 1X4 Panel Fixture.
PAC 2DF 36| Panel Air Craft Kit, 2 cables with Y splitter, with Power Feed, 36 inches. Recommended for 2X2 or 1X4 Panel Fixture. 1
PAC 4DNF 36| Panel Air Craft Kit, 4 cables, No Power Feed, 36 inches. Recommended for 2X4 or 2X2 or 1X4 Panel Fixtures.

Emergency Battery Delivered Lumens
Use the formula below to determine the delivered lumens in emergency mode

Delivered Lumens = 1.25 x P x LPW

P = Output power of emergency driver (10W for PS1055)

LPW = Lumen per watt rating of the luminaire.

PERFORMANCE DATA

Fixture Size| Lumen Package| (PROR) LUMEN OUTPUT PER SCALING PROCEDURE, PER CCT
---|---|---
3000K| 3500K| 4000K| 4500K| 5000K

1X4

| 2000LM| 2102| 1994| 2128| 2076| 1983
3000LM| 3253| 3086| 3293| 3213| 3068
4000LM| 4262| 4043| 4315| 4210| 4020
5000LM| 5210| 4942| 5274| 5147| 4914

2X2

| 2000LM| 2114| 2077| 2077| 2142| 2173
3000LM| 3488| 3426| 3426| 3534| 3584
4000LM| 4159| 4085| 4085| 4213| 4274

2X4

| 3000LM| 3216| 3257| 3313| 3535| 3343
4000LM| 4312| 4367| 4442| 4740| 4482
5000LM| 5221| 5287| 5377| 5738| 5426
6000LM| 6464| 6546| 6658| 7105| 6718
(RHYR) LUMEN OUTPUT PER SCALING PROCEDURE, PER CCT

2700K| 3000K| 3500K| 4000K| 4500K| 5000K| 5700K| 6500K
1991| 1973| 1944| 1928| 2121| 2087| 2002| 1972
3065| 3037| 2992| 2968| 3265| 3213| 3083| 3036
4063| 4026| 3966| 3934| 4327| 4258| 4086| 4023
4883| 4838| 4766| 4727| 5200| 5117| 4910| 4835
1996| 1972| 1960| 1961| 1998| 2003| 2017| 2041
3295| 3255| 3235| 3237| 3299| 3307| 3329| 3370
3900| 3853| 3829| 3831| 3904| 3913| 3940| 3988
3143| 3163| 3206| 3224| 3215| 3169| 3170| 3222
4209| 4236| 4293| 4317| 4306| 4244| 4245| 4315
5072| 5105| 5174| 5203| 5189| 5115| 5116| 5200
6355| 6396| 6483| 6519| 6501| 6409| 6410| 6515
Fixture Size| Lumen Package| (PROR) POWER INPUT PER SCALING PROCEDURE, PER CCT
---|---|---
3000K| 3500K| 4000K| 4500K| 5000K

1X4

| 2000LM| 16.0| 14.5| 15.3| 15.2| 14.9
3000LM| 26.9| 24.3| 25.7| 25.5| 25.0
4000LM| 36.9| 33.3| 35.2| 34.9| 34.3
5000LM| 44.6| 40.3| 42.6| 42.2| 41.5

2X2

| 2000LM| 17.7| 16.0| 15.7| 16.4| 17.3
3000LM| 30.0| 27.2| 26.6| 27.9| 29.4
4000LM| 35.4| 32.1| 31.4| 32.9| 34.6

2X4

| 3000LM| 26.4| 24.2| 23.8| 26.5| 26.0
4000LM| 35.3| 32.4| 31.9| 35.5| 34.7
5000LM| 43.9| 40.2| 39.6| 44.1| 43.1
6000LM| 56.4| 51.7| 50.9| 56.7| 55.4
(RHYR) POWER INPUT PER SCALING PROCEDURE, PER CCT

2700K| 3000K| 3500K| 4000K| 4500K| 5000K| 5700K| 6500K
16.2| 16.4| 15.6| 15.2| 16.8| 16.6| 16.1| 16.1
25.3| 25.6| 24.4| 23.7| 26.2| 26.0| 25.1| 25.1
36.6| 37.0| 35.2| 34.3| 37.8| 37.5| 36.3| 36.3
44.0| 44.4| 42.3| 41.2| 45.5| 45.1| 43.6| 43.6
18.1| 17.0| 16.0| 15.7| 15.9| 16.1| 16.4| 17.0
30.1| 28.4| 26.8| 26.2| 26.6| 26.8| 27.3| 28.3
36.2| 34.1| 32.2| 31.5| 31.9| 32.3| 32.8| 34.0
26.1| 25.0| 24.1| 23.7| 23.7| 23.5| 24.0| 25.1
35.0| 33.5| 32.3| 31.8| 31.7| 31.6| 32.1| 33.7
43.6| 41.7| 40.3| 39.7| 39.5| 39.3| 40.0| 42.0
56.3| 53.9| 52.0| 51.2| 51.1| 50.8| 51.7| 54.2
Fixture Size| Lumen Package| (PROR) LPW PERFORMANCE PER SCALING PROCEDURE, PER CCT
---|---|---
3000K| 3500K| 4000K| 4500K| 5000K

1X4

| 2000LM| 131.0| 137.7| 138.8| 136.9| 132.9
3000LM| 120.8| 127.0| 128.1| 126.3| 122.5
4000LM| 115.6| 121.6| 122.5| 120.8| 117.3
5000LM| 116.7| 122.7| 123.7| 121.9| 118.4

2X2

| 2000LM| 119.6| 129.7| 132.4| 130.2| 125.6
3000LM| 116.2| 126.0| 128.7| 126.6| 122.1
4000LM| 117.5| 127.4| 130.1| 127.9| 123.4

2X4

| 3000LM| 121.8| 134.5| 138.9| 133.1| 128.8
4000LM| 122.1| 134.8| 139.2| 133.5| 129.1
5000LM| 119.0| 131.4| 135.7| 130.1| 125.9
6000LM| 114.6| 126.6| 130.7| 125.3| 121.2
(RHYR) LPW PERFORMANCE PER SCALING PROCEDURE, PER CCT

2700K| 3000K| 3500K| 4000K| 4500K| 5000K| 5700K| 6500K
122.7| 120.4| 124.4| 126.9| 126.4| 125.5| 124.5| 122.5
121.0| 118.6| 122.6| 125.0| 124.6| 123.7| 122.7| 120.7
111.1| 108.9| 112.6| 114.8| 114.4| 113.6| 112.6| 110.8
111.1| 108.9| 112.6| 114.8| 114.4| 113.6| 112.6| 110.8
110.6| 115.8| 122.1| 124.9| 125.4| 124.4| 123.3| 120.3
109.5| 114.7| 120.9| 123.7| 124.2| 123.2| 122.0| 119.1
107.8| 112.9| 119.0| 121.7| 122.2| 121.3| 120.1| 117.2
120.5| 126.6| 133.0| 135.8| 135.9| 134.6| 132.3| 128.2
120.3| 126.5| 132.8| 135.6| 135.7| 134.4| 132.1| 128.1
116.4| 122.3| 128.5| 131.1| 131.2| 130.0| 127.8| 123.9
112.9| 118.7| 124.6| 127.2| 127.3| 126.1| 124.0| 120.2

Intelligent Luminaire Technology Guide

Choose nomenclature from these columns

Tunable White Option (CAT5 wiring to nIO EZDL CCT & nPS 80)

Simple as 1, 2, 3

1. Install the nLight® Wired fixtures with embedded control
2. Install the nLight Wired wall switch
3. Connect the fixtures using standard CAT5e cables and the devices will automatically discover each other and work (plug and play)

requirements
Flexibility| Ease of fixture moves, adds and changes
Wireless Wall Switch (nLight AIR Only)| Ease and flexibility of placement
Astronomical and Time of Day Scheduling| Energy savings and building security
Scalable Solution| nLight controls to grow with your business
Future-Ready| nLight platform to set foundation for future upgrades and capabilities
Sensor Options

Option

| Automatic Dimming Photocell| Occupancy Sensing| nLight Wired Networking
PIR| PDT
PIR| | X| | X
APIR| X| X| | X
PDT| | | X| X
APDT| X| | X| X

nLight Wired Networking
The nES 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the nES7ADCX includes an integrated photocell, which enables daylight harvesting controls.

For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nES PDT 7 dual technology sensor is recommended. The nES PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy. Additionally, the nESPDT7ADCX includes an integrated photocell, which enables daylight harvesting controls which is ideal for areas where windows are present.

Sequence of OperSEQUENCE OF OPERATIONation (nES7 Sensor)

*The presetting on the automatic dimming photocell is 5fc (NES7).

Sensor Coverage Pattern Mini 360° Lens

• Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 20 ft (6.10 m)
• Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 15 ft (4.57 m) and 1.75x up to 20 ft (6.10 m).
• Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m)
• Initial detection will occur earlier when walking across sensor’s field of view rather than when walking directly at sensor

DIMENSIONS

• Length: 47.8″ 121.4cm

• Width: 11.8″ 30.0cm

• Depth: 2.3″ 5.7cm

• Weight:

  • Unit: 9.25 lbs
  • Unit Carton: 10.25 lbs

• Length: 23.8″ 60.5cm

• Width: 23.8″ 60.5cm

• Depth: 2.3″ 5.7cm

• Weight:

  • Unit: 9.45lbs
  • Unit Carton: 10.45lbs

• Length: 47.8″ (121.4cm)

• Width: 23.8″ 60.5cm

• Depth: 2.3″ 5.7cm

• Weight:

  • Unit: 17.25 lbs
  • Unit Carton: 19.25 lbs

References

• Brands.com High End Domains
• Acuity Brands | Lighting, Controls, and Building Management Solutions
• A+ Certified
• Lithonia Lighting® | Best Value in Lighting
• CPX - LED Panel

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>