Potensic ATOM SE Foldable GPS Drone User Manual
- June 11, 2024
- Potensic
Table of Contents
Potensic ATOM SE Foldable GPS Drone
Product Information
The ATOM SE is a drone that is only suitable for ages 14 and above. It is
important to read the user manual before using the product. The package and
manual contain important information that should be kept properly. The product
should be assembled by an adult, and users aged below 14 should not handle the
product alone.
The battery should be handled with care to avoid scratch or injury. The
product should not be used in places with strong magnetic fields, near high-
voltage cables, buildings which contain metals, automobiles and trains, and
other no-fly zones.
Disclaimer & Precautions
The user manual contains important information that should be read before
using the product. The company and dealers are not liable for any personal or
property losses due to users. The product should be debugged and installed in
strict accordance with the manual’s steps. A distance of over 1-2m should be
kept with others while using the product to avoid injuries. Local laws and
regulations should be mastered to avoid violation of regulations.
Reading Tips
The user is suggested to watch the tutorial video and Quick Operation Guide
before consulting the manual. The Disclaimer & Precautions section should be
read first when consulting the manual. The tutorial video and PotensicPro app
can be used for better understanding of the product.
Usage Instructions
- Assemble the product by an adult.
- Read the user manual carefully before using the product.
- Keep a distance of over 1-2m with others while using the product to avoid injuries.
- Avoid using the product in places with strong magnetic fields, near high-voltage cables, buildings which contain metals, automobiles and trains, and other no-fly zones.
- Master local laws and regulations to avoid violation of regulations.
- Stop using the remote control within the radio control period and region of national departments as specified.
- Avoid low-altitude flight above water surface.
- Keep the product away from airport, airline, and other no-fly zones.
- If anything needs help, please contact the support team at support@potensic.com. When requesting an after-sales service, submit the order ID and details of the issues.
ATOM SE
DANGER
Only suitable for ages 14+
User Manual
V01. 23. 03
Email: support@potensic.com Email: support.uk@potensic.com Email: support.de@potensic.com
Email: support.fr@potensic.com Email: support.it@potensic.com Email: support.es@potensic.com
Email: support.jp@potensic.com Web: www.potensic.com FB: www.facebook.com/Potensic
Disclaimer & Precautions
Disclaimer
Drones are products that are potentially dangerous and relatively complex to
operate. Please be sure to read the full User Manual to ensure that you
understand the basic knowledge of the drone and are familiar with the basic
functions before using the product. It is recommended to use it in GPS mode in
an open outdoor area for the first time to get familiar with the operation.
Please follow the Manual’s operation instructions and precautions strictly, in
order to use the product safely and correctly. Users aged under 14 must be
accompanied by an adult while using the product. Please keep the product out
of children’s reach. For any direct or indirect loss (including but not
limited to property loss and personal injury) due to user’s failure in
following the Manual’s safety operation, the Company does not bear any
liability or offer warranty services. Do not dismantle any part except for
propeller blades, or refit the product and attach other items on it;
otherwise, user should undertake the consequences arising therefrom. For any
problem in use, handling and maintenance, please feel free to contact our
local dealer or the Company. Potensic reserves the final interpretation right
of this document and related product documents, and is subject to change
without notice. Please visit https://www.potensic.com for the latest
information.
1.2 Safety Precautions
Keep away from obstacles and crowds Keep the product away from crowds, high-
rise buildings and high-voltage cables, and avoid using it in severe weather
such as wind, rain and thunder, in order to keep the safety of the user and
the crowds, for the product may have uncertain flying speed, status and
potential hazards. Keep off moisture Keep the product off moisture to avoid an
anomaly or damage due to humidity of precise electronic components and
mechanical parts inside it. Safe operation The product may be exposed to
higher risk when user feels tired or lacks of energy and experience. Please
refit or repair the product with the original parts to keep safety. Please
operate and use the product within the allowed range and make sure to follow
the local safety rules. Keep away from high-speed revolving parts While the
product’s propellers are revolving at a high speed, keep it away from the
crowds and animals to avoid scratch or disturbance. Do not touch the revolving
propellers with hands. Keep away from heat source Keep the product away from
heat and high-temperature exposure to avoid the anomaly, deformation and even
damage, for it is made of metal, fiber, plastic and electronic elements.
1.3 Warning & Prompts
01. Please properly keep the package and manual which contain important
information. 02. User should avoid personal and property losses when using the
product. 03. Neither the Company nor our dealers bear any liability for the
proper losses and personal injuries due to users. 04. Debug and install the
product in strict accordance with the Manual’s steps. Keep a distance over
1~2m with others while
using the product, to avoid injury when the product crashes into people’s
head, face and body. 05. The product should be assembled by an adult. Users
aged below 14 should not handle the product alone. The battery
should be charged under the supervision of an adult and by avoiding
inflammables. 06. Keep the product out of children’s reach to avoid eating it
by mistake, for it contains small parts. 07. Do not use the product on the
road or in water to avoid an accident. 08. It is forbidden to dismantle or
refit the product, except for the propellers; otherwise, an anomaly may occur.
09. Please recharge the intelligent battery with USB charger that conforms to
FCC/CE standard. 10. The remote controller has a built-in 3.7V lithium battery
which needs no replacement. 11. Do not short-circuit or squeeze the battery to
avoid explosion. 12. Do not short-circuit, break down or throw battery in fire
or place it in hot place (in fire or near electric heater). 13. Keep a safe
distance from the propellers which are revolving at a high speed; do not use
the product in the crowds to
avoid scratch or injury. 14. Do not use the product in places with strong
magnetic field, such as near high-voltage cable, buildings which contain
metals, automobiles and trains; otherwise, the product can be disturbed. 15.
Please do master local laws and regulations, to avoid violation of
regulations. 16. Stop using the remote control within the radio control period
and region of national departments as specified, in order to
conform to the requirements for magnetic environment of aeradio. 17. Avoid
low-altitude flight above water surface. 18. Keep it away from airport,
airline and other no-fly zone.
Symbols
Prohibited
Important
2. Reading Tips
Operation & use prompts
Technical Terms and reference information
2.2 Suggestions of Use
1. User is highly suggested to watch the tutorial video and Quick Operation
Guide before consulting the Manual.
2. Make sure to read Disclaimer & Precautions first when consulting the
Manual.
2.3 Tutorial Video / PotensicPro APP
Scan the QR Code at the right side to watch Potensic Atom SE (Atom SE)
tutorial video and download PotensicPro APP (APP)
Please do watch the tutorial video in order to use the product correctly and
safely.
User can also watch the tutorial video of Atom SE in the menu column of APP
homepage.
2.4 Registration & Help
Make sure to register personal account in APP before the first flight, in
order to get better use experience.
Steps of Registration Please fill your E-mail, password, check the protocol
and click “Register”. You can login the system after registration. (Note: Keep
the mobile phone online during registration) Help Thanks for purchasing Atom
SE drone. Please read the Manual carefully. Please contact our support team at
support@potensic.com if anything needs help, when requesting an after-sales
service, it is required to submit order ID and details of the issues.
2.5 Technical Terms
IMU TOF (Time of Flight) Lower visual system
IMU (inertial measurement unit), the most important core sensor of the drone.
TOF (time of flight), the period from transmission and receiving of detection
infrared signal, in order to determine the target distance.
The sensor system, which lies at the bottom of the drone and consists of
camera and TOF module.
Visual orientation Compass Barometer
Lock/unlock
High-accuracy positioning, which is realized through lower visual system. Identify direction for geomagnetic sensor and the drone. Atmospheric pressure sensor, which enables the drone to determine the altitude through atmospheric pressure. Switch the drone motor from static status to idle running.
Idling Auto return
EIS
Drone head Throttle control stick
Pitch control stick Roll control stick
Once unlocked, the motor will start revolving at a fixed speed, but it has insufficient lifting force to take off. The drone will return to HOME point automatically based on GPS positioning. Electronic Image Stabilization; the camera will detect the data of high-frequency vibration and eliminate picture flutter through algorithm. Position of the drone camera. Ascend or descend the drone. Fly the drone to front or back. Fly the drone to left or right.
Yaw control stick
Enable self-rotation of the drone to left or right.
02
01 Disclaimer & Precautions Disclaimer Safety & Precautions Warning & Prompts
02 Reading Tips Symbols Suggestions of Use Tutorial Video/Download APP
Registration & Help Technical Terms
03 Contents
04 Overview Introduction Drone Diagram Remote Controller Diagram Preparing the
Drone Preparing the Remote Controller Charging/Startup and Shutdown
Contents
13 Remote Controller Overview Control Stick Mode Function Introduction Antenna
Angle
17 PotensicPro APP APP Homepage Flight Interface
20 Flight Requirements of Flight Environment Flight Precautions Connection
Flight Level Compass Calibration Beginner Mode Takeoff/Landing/Hovering Smart
Flight Return(RTH) Emergency Stop
08 Drone Positioning Downward Vision System Drone Status Indicator Smart Battery Propeller Flight Data Single Axis Gimbal Camera
25 Appendix Specification & Parameters Authentication Introduction
03
Overview
EN
This chapter introduces the functional characteristics of Atom SE, as well as
the component name of the drone and the remote control.
3.1 Introduction
With foldable arms and weight below 250g, the product is portable, and can
also be used without real-name registration in most countries. The product is
fitted with a visual positioning system, to realize precise hovering at low
altitude indoor and outdoor environment. Meanwhile, the product is fitted with
a GPS sensor to realize positioning and auto return. Based on 1/3 ” Sony CMOS
image sensor, the product can shoot 4K/30FPS HD video and 1.2-megapixel
pictures. Atom SE uses self-developed ShakeVanish electronic stabilization
technology to make the picture clear and stable. By using the brand new
PixSync 2.0TM 2.4G digital image transmission technique, the Atom SE remote
control can realize 4 km communication distance and 720P HD image transmission
maximally at ideal conditions. Open the pull-type and the foldable remote
control to contain your mobile device. Connect the remote control and mobile
device with USB data cable, to operate and set the product through APP and
display HD image transmission picture. The built-in lithium battery of the
remote control can work for approx. 2h maximally. Atom SE uses proprietary
SurgeFlyTM flight control technology, with a maximum horizontal flight speed
of 16m/s (52ft/s), a maximum flight time of about 31 minutes, and the ability
to withstand winds of up to level 5.
Test method of the max. flight period: Fly at an even speed of 5m/s at 25°C and in breezeless condition. Test method of the max. distance: Measured at an open and no-interference environment, with a flight height of 120m, and without considering the return of the drone.
Necessary tools for one flight: 1. Drone 2. Fully-charged smart battery 3. Remote Controller 4. Smartphone 5. Adaptive USB cable of mobile phone
3.2 Drone Diagram
1
1. Charging indicator 2. TYPE-C charging port 3. Battery buckle 4. SD card slot 5. Tail indicator 6. Monocular visual module
2 3
4
5 6
7 8
16
9
10
11
7. TOF module 8. Bottom cooling hole 9. Power indicator 10. Power/frequency
pairing button 11. Integrated single-axis gimbal camera 12. Brushless motor
04
12 13
14
15
13. Propeller 14. Arm 15. Antenna tripod 16. Arm shaft
3.3 Remote Controller Diagram
7 1
2
6
8
3
5
4
9
10
11
1. Power button Long press it for 2s to power on/off.
2. Power indicator Indicate the power level or other status of the remote
controller
3. Control stick slot One slot respectively at the left and right side, which
are used to store the sticks
4. TYPE-C interface To charge the remote controller/connect mobile device
5. RTH / Pause button Long press for 1s to return to HOME point automatically
Short press it to pause auto flight
05
6. Control stick 7. Foldable double antennas 8. Installation position of
mobile device
To place mobile device.
9. Shoot button Short press it to shoot one picture
10. Record button Short press it to start/stop recording
11. Left thumbwheel Dial the thumbwheel horizontally to control the tilt of
the gimbal.
3.4 Preparing the Drone
EN
The product is delivered under folded status. Please unfold it as follows:
1. Unfold the front arm before the rear arm
2. Unfold the propeller blades.
3.5 Preparing the Remote Controller
Installation of mobile phone and control stick
7
4 6
1. Unfold the antenna. 2. Connect your mobile phone to the USB cable. 3.
Insert the part of your mobile phone with the USB
cable into the slot of the remote controller. 4. Pull and open the remote
control with both hands
and fix your mobile phone stably. 5. Connect the other end of the USB cable to
the
remote controller. 6. Take out the sticks. 7. Screw in both control sticks
clockwise. 8. Installation completed.
06
1 2 3
5
8
3.6 Charging / Startup and Shutdown
When receiving a new drone battery, it is required to charge it to wake it up,
otherwise the drone wouldn’t start. Connect the TYPE-C charging port of
battery and a USB charger to the AC power supply to finish one-time charging
(USB charger is not included in the package. User can use the charger that
conforms to FCC/CE specification to charge the battery). The red indicator
will stay on during charging, and turn off automatically after charging is
done. User can charge the battery with the Parallel Charging HUB if fly
expansion kit is purchased. For more details, please refer to User’s Manual of
Parallel Charging HUB. The Parallel Charging HUB can also charge the remote
controller.
Mode 1
Mode 2
The shortest charging period is approx. 1h 25min through the type-C charging
port. Make sure your charger supports 5V/3A output in order to achieve this
charging speed. User is suggested to charge the battery through the Parallel
Charging HUB, in order to charge 3 batteries quickly at the same time. It is
suggested to remove the battery from the drone to charge for the sake of
safety; otherwise, the drone won’t power on if the battery is being charged in
the drone. If the charging cable is connected while the drone is on, it will
power off automatically and the charging will continue. The battery may become
too hot after use; do not charge it until it cools down; otherwise, charging
can be rejected by the smart battery. Charge the battery on a trimonthly basis
to maintain the activity of the cell. Please connect the original cable or any
cable that supports over 3A current to the type-C port; otherwise, it may
cause charging failure or battery damage.
Startup Drone: Make sure the battery is inserted in battery bin, short press
and then long press the power button until all indicators are on, and then
release the button to start up. Remote controller: Long press the “Power”
button until all indicators are on, and then release the button to finish
startup. Shutdown Drone: Short press and then long press the power button of
the drone until all indicators are on, and then release the button to shut
down. Remote controller: Long press the power button until all indicators are
off, and then release the button to shut down.
07
4. Drone
EN
The product consists of a flight control system, a communication system, a
positioning system, a power system and a smart flight battery. This chapter
sets down the functions of all parts of the drone.
4.1 Positioning
Atom SE adopts Potensic’s new SurgeFlyTM flight control technology, which
supports the following two positioning modes: GPS positioning: Provide precise
positioning and navigation to the drone; support precise hovering, smart
flight and auto return. Visual positioning: It can realize high-precision
positioning at a low altitude based on the Downward Vision System. The visual
positioning can be realized without GPS signal, so that the product can be
used indoors. How to switch: The flight control system will switch
automatically according to the environment of the drone. If both GPS and lower
visual system fail, the flight control will be switched to attitude mode,
under which, the drone fails to realize stable hovering and user needs to
correct the flight gesture manually through the control stick. The difficulty
of drone handling will be increased greatly in the attitude mode; make sure to
master the behaviors and operation of the drone in this mode before using this
mode; avoid flying the drone at a long distance, to avoid risks due to failed
judgment of drone gesture.
User can also switch to attitude mode in APP.
In visual positioning, smart flight is not supported and flight speed will be restricted.
The difficulty of controlling the drone will increase dramatically in ATTI Mode so make sure to master the operation of the drone in this mode. Always keep the drone within sight in order to avoid risks in case of failed judgment of the drone’s attitude and direction.
4.2 Downward Vision System
The Atom SE is equipped with a downward vision system, it is located beneath
TOF Module
the drone. The Downward Vision System consists of a monocular camera and
a TOF module. The TOF module includes a transmitter tube and a receiver tub,
it can precisely calculate the fly height above the ground by calculating the
infrared signals transmission and receiving time. In combination with the
monocular camera, the system can help achieve high-precision positioning at
low altitudes.
Detection Fileds
Monocular Camera
The Downward Vision System works best when the drone is at an altitude of 0.3 to 5 m, and its operating
range is 0.3 to 10 m.
When GPS is unavailable, the Downward Vision System is enabled if the surface has a discernable surface
and sufficient light. The Downward Vision System works best when the drone is at an altitude of 0.3 to 5 m. If the drone’s altitude is above 5 m, the Vision System may be affected, so extra caution is required
How to use
The Downward Vision System has enabled automatically if the positioning conditions are satisfied. The drone
tail indicator blinks cyan twice, which indicates the Downward Vision System is working.
Speed limit: To ensure positioning accuracy and flight safety during visual positioning flight, the drone will
actively limit its flight speed.
Visual positioning is only an auxiliary flight function, please always pay
attention to the changes in the flight environment and positioning mode, and
do not rely too much on the automatic judgment of the aircraft. Users need to
control the remote at all times and be prepared to operate the aircraft
manually at any time. The Vision System cannot work properly in any of the
following situations 1. Pure-color surface 2. Surface with strong reflection,
such as smooth metal surface 3. Transparent object surface, such as water
surface and glass 4. The moving texture, such as running pets and moving
vehicles.
08
5. Scenarios with drastic change of light; For example, the drone flies to
outdoor space with strong light from indoor space.
6. Places with weak or strong light. 7. The surface with highly repetitive
texture, such as floor tile with the same texture and small size, and highly
consistent strip pattern. For the sake of safety, please check the camera and
TOF transceiver tube before the flight, and clean it with a soft cloth if
there is any dirt, dust, or water on it; Contact Potensic Support if there is
any damage to the Vision System.
4.3 Drone Status Indicator
Start-up/Shut-down
Startup / Shutdown in progress: Green indicator is solid on
Flight status
Warning & Error
Upgrade & calibration
GPS positioning
Indicator flashes slowly in green
Remote control has no connection with the drone
(communication lost)
Indicator is in solid blue
Compass calibration (horizontal)
Indicator has alternative flashing between red and green
Visual positioning
Indicator flashes slowly in cyan
Attitude mode
Indicator flashes slowly in blue
Return Indicator flashes slowly in red
Low battery
Sensor error
Emergency stop of propeller
Indicator flashes quickly in red
Indicator is in solid red
Indicator has long-extinguishing and short-illuminance
Compass calibration (vertical)
Frequency pairing mode
Upgrade mode
Indicator has alternative flashing between blue
and green
Indicator flashes quickly in green
Indicator flashes quickly in blue
4.4 Smart Battery 4.4.1 Function
Atom SE smart battery is mounted with high-energy cell and advanced BMS. The
details are as follows:
Basic Parameters
Model: DSBT02A
Cell Qty.
2 series
Battery Capacity
2500mAh
Rated Voltage
7.2V
Charge Completion Voltage 8.4V
Charging Mode
TYPE-C/Parallel Charging HUB Max. Charge Current
TYPE-C: 5V/3A Parallel Charging HUB: 8V/2.2A x 3
Function
Balance protection
Self-discharge protection
Overcharge protection
Temperature protection
Intelligent current limiting of charging
Overdischarge protection
Short-circuit protection
Battery health monitoring
Communication function
Description
Balance cell voltage automatically to guarantee battery health.
If the battery is fully charged and left idle, it will slowly self-discharge
to 50%-70% after 5 days to protect the battery cells.
Charging will stop once battery is fully charged, for the battery can be
damaged by overcharging.
Please pay attention to your charging environment, for charging will be
stopped automatically when battery temperature is below 0°C or above 50°C.
When charging current is too high, the battery will restrict current
automatically in order to protect the battery.
In non-flight status, the battery will cut off power supply automatically to
avoid over-discharge when battery is discharged to a certain level; at this
time, the battery will enter sleep status. It is suggested to charge the
battery ASAP.
When the drone short-circuit is detected by the battery, the power supply will
be cut off automatically to protect the battery and the drone. The BMS will
monitor the battery health condition, prompt battery damage in APP in case of
cell damage, cell voltage unbalance or other battery errors, to remind user to
replace the battery in time. The battery can communicate with the the drone in
real time. User can view the information in APP, such as battery circulation
times and real-time electric quantity.
If the battery is not used for a long time, it needs to be charged every three
months to ensure its health. Please store the battery in a cool, dry place
where children cannot touch it.
09
4.4.2 Battery Installation & Removal
Installation: Push the battery into the product’s battery bin horizontally as
shown in picture below, the battery buckle is bounced and locked when hearing
“click” sound.
EN Removal:
Firstly, press the buckle of smart battery, hold
the upper cover of battery to pull out the battery.
Once the battery is inserted, make sure the battery buckle is bounced properly. This step is highly important and related to flight safety.
Make sure to power off the product before removing the battery.
Buckle is in position, safe
Buckle is not in position, which may result in the battery falling during flight.
4.4.3 Charging See 3.6 for charging method
4.4.4 View Power Level Once the battery is inserted in the drone, short press the power button to view the power level of smart battery, as shown in the picture below:
Power Button
LED 1 LED 2 LED 3 LED 4
LED 1
LED 2
Indicator is on
LED 3
LED 4
Indicator is flashing
Current power level 0%~25% 25%~30% 30%~50% 50%~55% 55%~75% 75%~80% 80%~97%
97%~100% Indicator is off
4.4.5 Operation Instructions of Smart Battery at High/low Temperature
When the battery temperature is 5°C, the APP will prompt a low temperature
warning of the battery, and the battery needs to be preheated before flying.
When the battery temperature is 60°C, the APP will prompt a high temperature
warning of the battery, and the drone will not be able to fly.
The discharge capacity will be weakened greatly and flight duration will
reduce at a low temperature, which is normal. Avoid long-term running at a low
temperature, otherwise, the battery life can be shortened.
10
4.5 Propellers
There are two types of ATOM SE propellers, which are designed to spin in
different directions. Marks are used to indicate which propellers should be
attached to which motors, the two blades attached to one motor are the same.
Propeller
Installation Instructions Schematic Diagram of Installation
Marked propeller
Install the marked propeller blades on marked arm
Unmarked propeller
Install the unmarked propeller blades on unmarked arm
Use the the screwdriver from the package to mount the propellers. Hold the motor to remove the propeller blades easier.
Make sure you attach the marked propellers to the motors of the arm with marks
and the unmarked propellers to the motors of the arm without marks. Or the
drone will be unable to fly. If a propeller is broken, remove the two
propellers and screws on the corresponding motor and discard them. Use two
propellers from the same package. DO NOT mix with propellers in other
packages. Propeller blades are sharp. Handle with care. DO NOT squeeze or bend
the propellers during transportation or storage. Purchase the propellers
separately if necessary. Stay away from the rotating propellers and motors to
avoid injuries. Please check the propeller blades immediately if there are any
jitters or speedless in flight, and timely replace the propellers if it’s
damaged or deformed. Make sure the motors are mounted securely and rotating
smoothly. Land the drone immediately if a motor is stuck and unable to rotate
freely. Stop flying the drone and contact support if there is any abnormal
sound with the motor. Make sure that the propellers are installed securely
before each flight. Check to make sure the screws on the propellers are
tightened.
When mount or remove the propellers, do not put the screwdriver or other
foreign materials inside the motors, or the motor may be damaged.
4.6 Flight Data
Atom SE supports recording of flight data. User can view the data in APP.
“Flight record” can display the basic data for each flight of user. “Flight
log” can record the detailed flight data of user. For any abnormal
circumstance in flight, user can report it in APP and, if necessary, upload
the flight log to seek for assistance.
All flight data are stored in user’s mobile device. No flight data will be
acquired by the Company, except for the data uploaded by user to the cloud
platform.
11
4.7 Single Axis Gimbal Camera 4.7.1 Single Axis Gimbal
The Atom SE camera is mounted with a single-axis gimbal, to adjust pitch angle
freely from +20° to -90° (horizontal direction is 0°).
The angle of the gimbal can be adjusted by scrolling the left thumbwheel of
the remote controller.
EN
20° 0°
-90°
The gimbal will be recovered to -9° automatically after each startup.
Avoid collision and moving the lens by force, for the gimbal contains precise
parts. Make sure the gimbal has no foreign matters and lens is free from dirt
before takeoff. The gimbal is connected to the drone through elastic and shock
absorption support, to eliminate camera vibration. Do not pull the gimbal by
force. For any damage of shock absorption support, please timely contact the
after-sales department for repairing.
Do not bind or paste any object on the gimbal. Otherwise, it may damage the
drone.
4.7.2 Camera
Basic Parameters
Sensor brand: SONY
Sensor size: 1/3″
Effective pixel: 1200W
Aperture: F2.2
FOV: 118°
Focus range: 3m ~
ISO range: 100~6400
Shutter range: 1/30~1/25,000s
Memory: Micro SD card
Shooting distortion: < 1% (after calibration)
Picture size: 12M (4,608*2,592)
Picture format: JPG/JPG+RAW(DNG)
Video format: MP4
Code: H.264
Video specification: 4K30 2.7K30 1080P60 1080P30
Do not touch the lens after recording for a long period of time to avoid scald. Do not record video when the drone is not flying; otherwise the drone will trigger overheat protection. The sensor will crop out the edges at 1080P/60fps, it’s simply capturing a central section of what the full-frame sensor would capture, and FOV is about 66°.
Image Storage
The videos and pictures recorded by Atom SE will be stored in SD card, instead
of APP or user’s album. Make sure to insert SD card prior to flight.
Otherwise, it is unable to record and shoot. (SD card is not included in the
product’s pack list!) User can preview and download the videos and pictures
(the drone and the remote control should be connected) in APP. SD Card
Requirements File format: FAT32, exFAT Capacity: 4G-256G Speed requirements:
It is suggested to use SD card above U1 (UHS Speed Class 1) or C10 (Class 10)
The video downloaded from APP is just 720P image used in image transmission.
Please read SD card with computer or other device in order to acquire videos
of higher definition.
The recording can be terminated due to slow write-in when using the U1/C10 SD
cards of certain brands. If important data are stored in your SD card, please
backup them properly. Do not insert or unplug the SD card when the product is
powered on. It may lead to data damage or loss, or even SD card damage when
inserting or unplugging SD card during video recording. Potensic does not bear
responsibility for any loss due to user’s misoperation of SD card.
12
Remote Controller
Overview
Potensic ATOM SE is equipped with the DSRC02A Remote controller, which boasts
Potensic long-range Pixsync 2.0TM image transmission technology, offering a
maximum transmission range of 4km/13,123ft and 720p when displaying video from
the drone to Potensic Pro on your mobile device. Easily control the drone and
camera using the onboard buttons. The detachable control sticks make the
remote controller easier to store. Thanks to the 2.4Ghz dual band antenna, in
a wide-open area with no electromagnetic interference, Pixsync 2.0TM smoothly
transmits video links at up to 720p at a max altitude of 120m.
The built-in battery has a capacity of 2200mAh and a maximum run time of 2
hours. There is a USB C port for device connection. The remote controller
charges the mobile device with a charging ability of 500mA@5V.
Control Stick Mode Mode 1 (Left Hand Throttle)
Left stick
Up
Right stick
Forward
Down
Backward
Turn left
Turn right
Left
Right
Mode 2 (Right Hand Throttle)
Left stick
Right stick
Forward
Up
Backward
Turn left
Turn right
13
Down
Left
Right
5.3 Function
EN
5.3.1 Function List
Charge
1. Connect the USB Charger to the USB C charging port. 2. The battery is being charged when power indicator starts flashing. 3. Charging is completed when 4 LED indicators are solid on and data cable can be removed.
Recharge mobile phone
When a mobile device is connected, the remote controller automatically charges devices with a charging ability of 500mA@5V.
Indicator function See 5.3.2
Flight control
See 5.2
Low battery prompt
When power level of the remote controller is lower than 10%, the remote controller will have a “beep” sound every second.
Auto shutdown One-key return
Pause
The product will shut down automatically if the remote controller has no
connection and operation for 20mins.
See 7.9
If the drone is performing a Smart Flight like Circle Flight or auto landing,
press once to make the drone brake and hover in place. Press again to cancel
it and regain the control of the drone.
For any emergency situtaions during the flight, press “Shoot” and “Record” button for 2s at the same time till the remote controller beeps, the drone will stop running and fall down.
Emergency stop
Shoot Record video
Short press it to shoot one picture When camera is in video recording mode,
short press it to switch to shoot mode
Short press it to start/stop video recording When camera is in shooting mode,
shot press it to switch to video recording mode
Gimbal Dial
Dial it to the right to increase the pitch angle (head up) Dial it to the left to decrease the pitch angle (head down)
Remote controller frequency pairing
See 5.3.3
14
5.3.2 Indicator
As shown in the picture below, the remote control is fitted with 4 white LED
indicators to indicate the power level and other status.
Indicator is on
LED 1 LED 2
LED 4 LED 3
Indicator is flashing Indicator is off
Charging indication LED 1 LED 2 LED 3
LED 4
Current power level of battery 0%~25% 25%~50% 50%~75% 75%~99% 99%~100%
Power indication (in use) LED 1 LED 2 LED 3 LED 4
Current power level of battery 0%~10% 10%~25% 25%~50% 50%~75%
75%~100%
Status indication Frequency pairing Upgrade mode Start calibration
LED 1
LED 2
LED 3
Flashing slowly at the same time
Waterflow light
Flashing slowly at the same time
15
LED 4
5.3.3 Remote Controller Function
EN
The Atom SE drone and the remote controller can be used immediately after startup since they have passed
frequency pairing before delivery. If a new remote controller or drone is used for the first time, user must conduct
frequency pairing for them as follows prior to use:
1. Power on the remote controller and connect it with the mobile phone, launch PotensicPro APP, tap setting and
select “Rematch the drone” to enter the frequency pairing interface.
2. After powering on the drone, long press the”Power”button until the drone indicator flashes quickly in green; at
this time, the drone is ready for frequency pairing.
3. Wait for about 7s, the remote controller beeps once to indicate frequency pairing is successful and the flight
interface of the APP will show realtime image transmission.
Make sure the remote controller is within 1m of the drone during frequency pairing.
If frequency pairing fails, check if there are interferences nearby, or other drones are also in frequency pairing mode, or the remote control is too far away or blocked. Eliminate the problems above and try again. Do not relocate or handle the remote control and the drone during frequency pairing.
5.4 Antenna Angle
Adjust the antenna angle along with the changes of drone height and distance,
to ensure the best communication status of the remote controller.
Wider communication angle is ensured at a close distance in this mode.
Keep both antennas pointing directly towards the drone to acquire a longer transmission distance.
If the drone is right above user, this angle can ensure best communication effect.
Do not cross the antenna in any case.
Do not press the antenna on your mobile device in any case.
16
6. PotensicPro APP 6.1 APP Homepage
Tap the icon to view the tutorials, flight tips, flight records, flight logs
and manual documents Tap to choose the corresponding model. The drone model
will be matched automatically if user has connected the remote control to the
mobile phone
Display connection status
Tap to enter the flight interface
Me: Report a problem, modify account info, browse User Agreement, find the
missing drone, close account and other settings Photo album in APP (Connect
the drone to see the contents in the drone SD card) Homepage of APP
17
6.2 Flight Interface
1
2
EN
4
6
8
3
5
7
9
19
10
18
11
17
12
13 14
16
15
1. Return button: Tap to return to the homepage
2. Navigation prompt bar: Display drone status and flight mode
5. Positioning mode: GPS positioning Visual positioning Attitude mode, no positioning
3. Flight mode: Video Normal Sport
4. Head / Headless mode: Head mode Headless mode
6. GPS status: Display GPS signal status and quantity of satellites searched
7. Signal quality of HD image transmission: Display the strength of image
transmission
connection signal between the drone and the remote control
8. Power level of the smart battery: Estimated Remaining Flight Time
9. System Settings Tap to view information about control, calibration, smart battery and other general settings. Control settings The beginner mode can be turned on or off, and the return height, flight fence, speed gear, and surround settings can be set. Calibration User can calibrate the compass and the remote controller manually. Remote controller settings Control stick mode: Mode 1 (Left Hand Throttle), Mode 2 (Right Hand Throttle) Rematch the drone: Rematch is required after the drone or the remote controller is replaced Smart battery User can view the status and health condition of smart battery General settings User can set measurement unit, decoding mode, view device serial number, firmware version and upgrades.
18
10. Display Shooting Information
In shooting mode, it will display picture size, exposure compensation and
remaining shooting number In video recording mode, it will display resolution,
exposure compensation and remaining video recording time
11. Shoot/record switch button: to switch from shooting to video recording
to switch from video recording to shooting.
12. Shoot/record button: Video recording mode, click it to start video recording Video recording in progress, click it to cancel Shooting mode, press it to shoot picture
13. Shooting setting menu
Shooting mode: Set grid switch, exposure compensation, picture format and SD
card formatting. Video recording mode: Set grid switch, flight data watermark,
exposure compensation, video segmentation, video format and SD card
formatting.
14. Album: Preview or download shot videos or pictures in SD card.
15. Display flight speed and distance
D Horizontal distance from the drone to takeoff point
Horizontal speed from the drone to takeoff point
H Relative height from the drone to takeoff point
Vertical speed from the drone to takeoff point
16. Attitude sphere/thumbnail map Click attitude sphere to switch to thumbnail map Click thumbnail map to switch to full-screen map
Wind Speed Scale Drone Drone tilt angle
Remote controller HOME point
17. Smart flight
Smart Mode: Head/headless mode, One-key lock/unlock, Attitude mode
Smart Flight: Circle flight, waypoint flight and follow flight
18. One-key takeoff, landing/return The APP will display different buttons based on drone status. Tap to initiate one-key takeoff, landing or return.
Tap to unlock, take off and hover at a height of 1.2m
Tap to land or auto return.
19. Display important information or status of drone
Make sure to fully charge the mobile device prior to flight, because the power
of the mobile device will be consumed even if it is charged by the remote
control. Mobile cellular data is required when using the PotensicPro APP.
Please contact your wireless carrier for data charges. While using the APP,
make sure to read and master the pop-up prompts and warning information of APP
to know the current status of the drone. It is recommended to replace any
outdated mobile device which may have a negative impact on user experience of
APP and lead to potential dangers. For any poor user experience and safety
problems due to the use of an outdated mobile device, Potensic does not bear
any liability.
19
7. Flight
EN
This chapter introduces safe flight practices and requirements.
7.1 Requirements of Flight Environment
1. Do not use the product in severe weather, such as gale, rain, snow and
fog. 2. Only fly in open areas. Tall structures and large metal structures may
affect the accuracy of the onboard
compass and GPS system and result in positioning failure. It is recommended to
keep the drone at least 5m away from structures. 3. Control the product within
your sight and keep away from the obstacles and crowds. 4. Do not use the
product in places with high-voltage power lines, telecommunication base
station or launching tower, to avoid interference of the remote control. 5.
Please use the product with caution when altitude is over 3,000m for the
flight performance can be affected when the performance of drone battery and
power system is weakened due to environment factor.
7.2 Precautions of Flight
1. Check if the remote control, intelligent flight battery and mobile device
are fully recharged. 2. Check if the drone is intact and propellers are
installed correctly. 3. Check if the camera is working normally after power-
on. 4. Check if APP is running normally. 5. Check if SD card is inserted and
make sure camera is clean. 6. Make sure the drone takes off on flat and hard
surface, instead of sandstone or bush; the drone may fail to
be unlocked if it has major vibration. 7. Please be careful when the done
takes off on surface of moving objects, such as running vehicle and ship. 8.
GPS positioning and waypoint flight will be disabled in the south and north
polar. 9. Do not use the product in extreme cold or hot place to avoid
hazards.
7.3 Connection
Please follow the steps below:
1. Please finish the steps in “3.5 Preparing the Remote Controller” and turn on the remote control.
2. Please finish the steps in “3.4 Preparing the drone” and turn on the remote control.
3. Launch APP to view the connection status. Connection is finished when it shows .
4. Tap
to enter the flight interface.
It is advised to tap and read for first-time users.
Follow the animated guide and operate
7.4 Flight Mode
ATOM SE has three flight modes-Video/Normal/Sport, which can be switched via
the APP. Video Mode Ascending: 2m/s, descending: 1.5m/s, horizontal movement:
6m/s The system will enter beginner mode by default when using the drone for
the first time, and the flight mode will be limited at beginner mode. Normal
Mode Ascending: 4m/s, descending: 3m/s, horizontal movement: 10m/s The
beginner mode can be quit after the flight operation is mastered, and the
normal mode will be entered by default. This is the common mode. Sport Mode
Ascending: 5m/s, descending: 4m/s, horizontal movement: 16m/s Video mode is
recommended in aerial photography. Sport mode is recommended if you would like
to get a. Please pay more attention in Sport Mode flights as the the
responsiveness of the drone significantly increases in Sport mode.
Be vigilant and maintain adequate maneuvering space during flight, as the
responsiveness of the drone significantly increases in Sport mode.
20
7.5 Compass Calibration 7.5.1 Scenarios Requiring Compass Calibration
1. Compass calibration is required for first time using. 2. Flying at a
location further than 31 miles (50 km) away from the location the drone was
last flown.
DO NOT calibrate the compass in locations where magnetic interference may
occur such as close to magnetite deposits or large metallic structures such as
parking structures, steel reinforced basements, bridges, cars, or scaffolding.
DO NOT carry objects that contain ferromagnetic materials such as mobile
phones near the drone during calibration. Make sure the drone is at least 1m
above the ground during the calibration. It is not necessary to calibrate the
compass when flying indoors.
7.5.2 Calibration Procedure
Choose an open area to carry out the following procedure. 1. When calibration
is required, the APP will pop up the calibration interface automatically, just
tap “Start
calibration”, and the tail indicator will alternatively flash in red and
green. 2. Hold the drone horizontally and rotate it 360° till the app shows
vertical calibration, and the tail indicator will
alternatively flash blue and green. 3. Hold the drone vertically and rotate it
360° around a vertical axis till the APP prompts the calibration
completed. Users can also trigger compass calibration manually in the APP
setting.
If the calibration has failed, change your location and try the calibration
procedure again. Please pay attention to the instructions of magnetic field
environment in calibration interface. Do not calibrate compass while arms are
folded.
7.6 Beginner Mode
The drone is automatically set to Beginner Mode for first-time use. In
beginner mode: 1. The flight distance and height will be restricted at 0~30m
2. The speed level will be restricted at Video mode 3. The beginners are
suggested to learn and master the drone in beginner mode
21
7.7 Takeoff/Landing/Hovering
EN
7.7.1 Manual Takeoff/Landing
Takeoff
Step 1: Start the motors
Use a combination stick command to start the motors. Push both sticks to the bottom inner or outer corner depending on your control stick mode to start the motors. Release both sticks simultaneously once the motors are spinning.
Left control stick
or
Right control stick
Left control stick
Right control stick
Step 2: Push throttle control stick to take off Push the throttle control stick upwards gently as shown in the picture, release the control stick when the drone leaves ground and it will keep hovering.
Landing
Throttle control stick
Pull the throttle control stick until the drone lands on ground. Release the throttle control stick when the motors
are no longer spinning.
It is not suggested to take off at low battery, for it may affect the battery service life. Please handle it with caution and undertake the corresponding consequences if compulsory takeoff is required. Keep the distance over 0.5m between the drone and ground, for it may fail to enter good hovering status due to air flow when it is close to the ground. If the drone fails to be locked after landing due to anomaly, pull down the throttle control stick to the limit position for 3s and the drone will be locked by force.
7.7.2 One-key Takeoff / Landing
One-key takeoff Tap one-key takeoff button in App, then swipe right in the
pop-up window to start the drone automatically then ascend to the height of
1.2m and maintain hovering.
One-key landing Tap one-key landing button in App, then swipe left in the pop- up window to land the drone, or swipe right to start returning.
7.8 Smart Flight 7.8.1 Headless Mode
Description
Drone’s head direction will not be considered in headless mode, pull the pitch control stick to make the drone leave or approach the HOME point; pull the roll control stick to make the drone fly clockwise or anticlockwise in circle along with HOME point; the functions of throttle control stick and yaw control stick remain unchanged.
Switch mode
When GPS signals are strong and horizontal flight distance is over 3m, Tap
Head mode
Headless mode
in App.
22
7.8.2 Circle Flight
Description
Start circle flight, the drone will fly forwards by taking the current position as circle center until it reaches the starting point of circle flight; When user tap GO in APP, the drone will fly around the circle at a set speed and direction.
Adjustable parameter User can set the flight radius, speed and direction of circle flight in setting menu.
How to start How to exit
When GPS signal is normal and flight height is 5m, tap and select in APP.
1. Quit flight automatically after finish circle flight. 2. In process of
circle flight, tap on the left in PotensicPro APP to exit circle flight.
When circle flight is enabled, the drone will ascend to 5m automatically if
its height is less than 5m.
Make sure there’s no obstacle in the radius of circle flight and use the
product with caution, for the drone does not support obstacle avoidance
function.
7.8.3 Follow Me Flight
Description How to start
Once follow me flight is enabled, the drone will follow User’s mobile device
at the current distance; The flight height and yaw can be adjusted during
follow me flight.
When GPS signal is strong and horizontal flight distance is 5-50m, tap and
select in APP.
How to exit
Tap on the left in PotensicPro APP to exit follow me flight.
When follow me flight is enabled, the drone will ascend to 5m automatically if
its height is less than 5m. The follow accuracy depends on the quality of the
drone GPS signal and positioning accuracy of user’s mobile device.
The follow me flight depends on the positioning of user’s mobile device. The
positioning authority of APP is required, or this function is disabled.
7.8.4 Waypoint Flight
Description
When waypoint flight function is enabled, User can freely set 1 or multiple waypoint coordinates in APP map, and the drone will fly over the corresponding coordinates according to the sequence of set waypoint coordinates.
When GPS signal is strong, tap and choose in App, then add a location mark in map and set it as waypoint, then tap GO to start waypoint flight. User can set 1-30 waypoints; The figure in waypoint icon indicates the flight sequence. Meanwhile, User can delete certain waypoints, save the data of the current waypoint flight, or choose from the saved waypoint flights.
How to start
How to exit
Tap on the left in PotensicPro APP to exit waypoint flight.
23
7.9 Return(RTH)
The return consists of three steps, as follows: 1. Ascent: The drone ascends
to the set return altitude (this step is skipped if the drone’s altitude is
already
higher than the return altitude). 2. Level flight: The drone maintains a
straight flight at the set altitude towards the home point. 3. Landing: Once
it reaches the home point, the drone will automatically land and stop its
propellers.
Return to Home (RTH) The drone must be in GPS mode
2 Return flight
Return altitude = Your settings
3 Landing H
20m
1 Return ascent
If Drone altitude return altitude, start from step 2
How to RTH One key RTH: Press and hold the RTH button on the remote controller
for 1s or tap in APP to pop up the menu, then swipe right to start the return
(see 7.7.2). Auto RTH: When either the drone battery level is low, the signal
between the drone and the remote controller is lost or the drone is
experiencing other abnormalities, Auto RTH will be triggered.
How to exit the RTH Method 1: Tap on the left of APP to exit RTH. Method 2:
Briefly press the return button on the remote controller to exit RTH.
RTH Requirements The drone must take off in GPS mode and successfully record
the HOME point. If the drone takes off in OPTI mode and switches to GPS mode
mid-flight, it will not be able to return to the takeoff point. Please pay
attention to the location of the HOME point on the map and the prompts in
PotensicPro APP.
The default return altitude is 30m, which can be modified in PotensicPro APP.
During the return course, users can still adjust the flight altitude by
adjusting the throttle. The drone will return when it is within 20m of the
HOME point, and the return height will be 5m. Please pay attention to safety.
Tall buildings or obstacles can block the transmission signal and cause signal
loss. Do not fly behind buildings beyond the return height, otherwise the
drone will collide with obstacles and crash during the return. If the drone
enters ATTI mode due to GPS failure or GPS signal interference, it will not be
able to return. During the return process, strong headwinds may be
encountered. Lowering the flight altitude appropriately can help reduce power
consumption. If the power is insufficient, the drone will perform a forced
landing in place. Please pay attention to the prompts in PotensicPro APP. Do
not initiate the return when there are obstacles overhead, such as tall trees,
otherwise the drone may crash during the climb.
Please pay attention to return safety, because the drone does not support
obstacle avoidance and may crash when colliding with obstacles during the
return course. For any GPS signal anomaly in communication loss return, the
drone will maintain hovering at ATTI mode, until GPS signal is strong enough
and the return will resume.
7.10 Emergency Stop
See 5.3.1 Emergency stop for the detailed operation method.
Emerency stop function is designed for preventing injuring pedestrians or
damaging the valuables by propeller blades in case of drone failure. Please
use it with caution, because stopping the motors mid-flight will cause the
drone to crash.
24
8. Appendix
8.1 Specification & Parameters
Drone
Takeoff weight: < 249 g (the takeoff weight includes battery and propeller
blades)
Fold size: 88x143x58 mm
Unfold size (propeller blades included): 300x242x58 mm
Unfold size (propeller blades excluded): 210x152x58 mm
Diagonal Distance: 219 mm
Max flight speed(Sport Mode): Ascending: 5m/s; Descending: 4 m/s; Horizontal
flight: 16 m/s
Max flight time: 31 min (measured at breezeless condition and even speed of
5m/s) Max wind speed resistance: Level 5
Maximum flight altitude: 120m/393.7ft
Operating temperature: 0 °C ~ 40 °C
GNSS: GPS + GLONASS
Operating frequency: 2.400 ~ 2.4835 GHz
Transmission power: 2.4 GHz: < 24 dBm
Hovering Accuracy Range: Vertical: ±0.1m (with Vision Positioning), ±0.5 m
(with GPS Positioning) Horizontal flight: ±0.3 m (with Vision Positioning),
±1.5 m (with GPS Positioning)
Extra payload: Not supported
Downward Vision System
Hovering range: 0.3-5m(ideal environment); Available at 0.3-10m.
Unavailable scenarios of visual positioning:
1. Pure-color surface
6. The places with weak or strong light
2. Surface with strong reflection, such as smooth metal surface 3. Transparent object surface, such as water surface and glass 4. Moving texture, such as running pets
7. The surface with repeating identical patterns or textures, such as floor
tile with the same texture and size
8. The surface with highly consistent strip pattern
5. Scenarios with drastic change of light; for example, the drone flies to outdoor space with strong light from indoor space
Camera
Lens tilt range: +20 ° ~ 90 ° CMOS: 1/3″ Effective pixel: 1200 W ISO range:
100 ~ 6400 Electronic shutter speed: 1/30 s ~ 1/25000 s FOV: 118 ° Aperture:
F2.2 Photo resolution: 4,608*2,592
Image format: JPG/JPG+RAW(DNG)
Video resolution: 4K @ 30fps; 2.7K @30fps; 1,080P @60fps; 1,080P @30fps;
Video format: MP4 (H.264)
Max Video Bitrate: 40 Mbps
Supported file system: FAT 32, exFAT
Type of supported storage card: Micro SD card; 4 ~ 256GB SD card transmission
speed class10 or U1 standard
Remote controller
Operation frequency: 2.402 ~ 2.483 GHz
Charging interface: TYPE-C
Max Transmission Distance(unobstructed, free of interference): 4km Operating temperature: 0 °C ~ 40 °C Battery: 2,200 mAh, lithium battery, 1 S Transmitter Power (EIRP): 2.4 GHz: 20 dBm
Charging specification: 5 V/1 A Video Transmission System: PixSync 2.0TM Image transmission quality: 720 P Latency (depending on environment and mobile device): 200 ms
Supported Mobile Device Size: Length: 160mm, Width: 100mm, Thickness: 6.5mm-8.5mm
Smart flight battery
Model: DSBT02A Capacity: 2,500 mAh Voltage: 7.2 V Battery type: Li-ion 2S
Energy: 18 Wh Battery weight: 103 g Working temperature: 0 °C ~ 40 °C
25
DANGER
Only suitable for ages 14+
Warning: The product should only be used by adults and children over 14 years.
Adult supervision is required for children under 14 years. Hinweis: Dieses
Produkt ist für die Erwachsene und die Kinder ab 14 Jahren. Die Kinder unter
14 Jahren müssen von Erwachsenen beaufsichtigt werden. Avertissement: Ce
produit est destiné aux adultes et aux enfants de plus de 14 ans. Les enfants
de moins de 14 ans doivent être surveillés par des adultes. Avvertimento:
Questo prodotto è destinato all’uso per i adulti e bambini di età superiore ai
14 anni. I bambini di età inferiore ai 14 anni devono essere sorvegliati da un
adulto. Advertencia: Este producto es para adultos y niños mayores de 14 años.
Los niños menores de 14 años deben ser supervisados por adultos. 1414
NOT SUITABLE FOR
CHILDREN UNDER 3 YEARS
WARNING:
DUE TO SMALL PARTS
COUNTRY OF ORIGIN: CHINA
Drone FCC ID: 2AYUO-DSDR04B Remote controller FCC ID: 2AYUO-DSRC02A Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation. Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Manufacturer: Shenzhen Deepsea Excellence Technology Co., Ltd.
Address: 5th Floor, Building 7, Hongfa High-tech Park, Keji 4th Road, Shiyan
Street, Baoan District, Shenzhen EC REP: E-CrossStu GmbH. Mainzer
Landstr.69,60329 Frankfurt am Main UK REP: DST Co.,Ltd. Fifth Floor 3 Gower
Street, London, WC1E 6HA, UK
214-113197
MADE IN CHINA