Potensic P5 GPS Drone with 4K Camera User Manual

Potensic P5 GPS Drone with 4K Camera

Product Information

• Product Model: P5G
• User Manual: 2.7K / 4K User Manual
• Email Support: support@potensic.com
• Website: www.potensic.com
• Facebook: www.facebook.com/Potensic
• Support Email (DE): support.de@potensic.com
• Support Email (FR): support.fr@potensic.com
• Support Email (UK): support.uk@potensic.com
• Support Email (IT): support.it@potensic.com
• Support Email (ES): support.es@potensic.com
• Support Email (JP): support.jp@potensic.com

Product Usage Instructions

1. Read and keep the package and instruction manual for future reference.
2. Ensure that the aircraft does not cause injury to others or damage to property. Follow the instructions provided during debugging or assembling the aircraft.
3. Maintain a distance of 1-2 meters from the user or other persons during flying or landing to avoid injury to the head, face, or body.
4. Our company and distributors are not responsible for any loss, damage, or injury caused by incorrect operation.
5. This product is suitable for children aged 14 and above. Children under 14 years old are forbidden to use this product without adult supervision.
6. Assemble and use the product correctly as shown in the instruction manual or packing instruction. Some parts may require adult assembly.
7. Keep small parts out of reach of children to avoid choking hazards or accidental swallowing.
8. Do not play with the aircraft on the road or near high traffic areas to prevent accidents.
9. Dispose of packing material properly to prevent injury to children.
10. Do not disassemble or modify the aircraft, as it may cause breakdowns during flight.
11. Use only the original charging cable provided.
12. The remote control requires 1.5V/AAA batteries (not included).
13. Only use the original charger made by the factory.
14. The charger is not a toy. Charge the battery under adult supervision and keep it away from combustible objects.
15. Avoid short-circuiting or squeezing the battery to prevent explosions.
16. Do not mix the lithium battery with a different type of battery.
17. Avoid short-circuiting, decomposing, or throwing the batteries into fire. Keep batteries away from high temperatures or heated areas.
18. Maintain distance from other electric compliance or equipment, as well as magnetic objects, to avoid interference.
19. Keep a safe distance from the high-speed rotating rotor to prevent injuries.
20. Avoid touching the heated engine to prevent burns or injuries.
21. Do not shoot the light beam directly at someone and avoid staring directly at the Light Emitting Diode, as it can emit laser radiation.

Disclaimer and Note

Dear Customers:
Thank you for purchasing this product. In order to operate the drone conveniently and safely, please read all instructions and warnings carefully before operating. Please also keep the instruction manual for future reference and maintenance.

IMPORTANT

1. This product is not a toy. It is a precision device, integration machinery and electronics with air mechanics and high frequency transmission. It requires correct assembly and debugging to avoid any accident. The user should operate and control this product in a safe manner. In case of incorrect operation, it may cause serious injury or property damage. It can also be lost due to incorrect operation. We should assume no responsibility, because we can not control the process of assembly, use and operation of the aircraft.
2. This product is suitable for experienced UAV pilots aged 14 and above.
3. Flying place must be a locally legal flying site for R/C model.
4. Once the product is sold, we will assume no safety responsibility arising from using, operation and control of the aircraft.
5. In the event of a problem during using, operating of maintenance, please contact us by email, we will respond to you within 24 hours.

SAFETY PRECAUTIONS
The R/C aircraft model can be dangerous when in use, please make sure you keep it far away from any person or spectators when flying. Artificial incorrect installation or body damage, poor electronically-controlled device, or unfamiliarity with operation may cause damage to the aircraft or injure people or cause an unexpected accident. Please pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an accident due to your own negligence.

PREFLIGHT PRECAUTIONS

1. Check if the battery levels of transmitter and receiver are saturated.

2. Check if throttle Joystick and throttle of the transmitter are trimmed at the centre position before power-on.

3. Be sure to follow the ON/OFF sequence of power source upon power-on. Be sure to turn on the power of transmitter upon power-off. Incorrect ON/OFF sequence may cause the uncontrolled status of aircraft, thereby influencing personal safety. Please develop correct ON/OFF habit.

4. Check if the connection between the battery and such parts as motor is firm and reliable.
   The continuous vibration of aircraft may cause loose of power connector, thereby resulting in uncontrolled status of aircraft.

5. Keep it far away from any structures or crowds. The R/C aircraft may danger. Therefore, please keep it far away from crowds, buildings, trees, structures, high voltage wire, etc. Please also avoid flying in adverse weather conditions such as rain, electrical storms, and high winds to ensure safety of the user, any spectators, and surrounding property.

6. Keep it away from any moist environment. The inside of the aircraft is composed of many precision electronic and mechanical parts. Therefore, please try to avoid any moisture or water content from entering the main body of the aircraft as it may cause a breakdown of the electronic and mechanical parts and thus cause an accident!

7. Only operate with included parts for intended use. Please use the original parts for any upgrade, re-equipping or maintenance to ensure flying safety. Please operate and use only under the scope of the product function permitted. DO NOT use for any illegal purpose or use beyond the scope of which your local laws and regulations have stipulated.

8. Avoid controlling it independently. New users may have certain difficulties during the early stages of learning to operate the aircraft. Please try to avoid operating the aircraft alone. When available always operate the aircraft under the guidance of a more experienced user.

9. Safe operation
   Please operation the R/C aircraft according to your own state and flying skill. Any fatigue, bad mental state, or incorrect operation may increase the probability of accidental risk.

10. When the operator is flying in high speed, please keep the aircraft far from the pilot and any surrounding persons or objects so as not to cause danger or damage.

11. The R/C aircraft is composed of materials such as metal, fiber, plastic, electronics, etc.
    Therefore, please keep it away from any heat source and avoid prolonged exposure to direct sunlight. Excessive heat exposure can cause distort and damage.

WARNING

1. There is important information contained in this package and instruction manual, please keep it for future reference.
2. You have the responsibility to make sure that this model of aircraft won’t cause injury to others’ body or cause any damage to property.
3. Please operate strictly as shown on the instruction manual when debugging or assembling this aircraft. During the process of flying or landing, be sure to keep a distance of 1-2 m away from the user or other persons so as to avoid injuring the head or face or body.
4. Our company and distributors won’t be responsible for any incorrect operation, which may cause loss or damage or injury to the body.
5. Children aged 14 and above should use this product under the guidance of an adult. This product is FORBIDDEN to be used by children under 14 years old.
6. Please correctly assemble and use this product as shown on the instruction manual or packing instruction. Some parts should be assembled by an adult.
7. Small parts are included with this product. Please place it beyond the reach of the children to avoid a CHOKING HAZARD or parts being mistakenly swallowed.
8. Playing on the road or near high traffic areas is strictly FORBIDDEN so as not to cause an accident.
9. Please dispose of the packing material timely so as not to cause injury to children.
10. Please DO NOT disassemble or re-equip the aircraft as it may cause a breakdown of the aircraft during flying.
11. Please use the original charing cable.
12. The remote control uses 1.5V/AAA batteries (not included).
13. Only the original charger made by our factory can be used.
14. Charger is not a toy.
15. When charging the battery, please conduct it under the surveillance of an adult. Please also keep it far away from any combustible object when charging. Please keep this aircraft within eyesight when charging.
16. Please DO NOT made it short-circuited or squeeze the battery so as not to cause an explosion.
17. DO NOT mix the lithium battery with a different type of battery.
18. Please DO NOT make the batteries short-circuited or decompose the batteries or throw the batteries into the fire; DO NOT place the batteries near the high temperature or heated area (such as near the fire or near the electric heating device.)
19. Aircraft should be kept far away from any other electric compliance or equipment as far as possible or kept far away from the place where there is a magnetic object nearby as they may cause interference with each other.
20. Please keep the safe distance from the high-speed rotating rotor so as not to cause the danger of being twisted, wounded or cut.
21. Engine will heat up. Please DO NOT touch it to avoid being burned or injured.
22. The Light Emitting Diode can send out laser radiation. Please DO NOT shoot the light beam directly at someone and do not stare directly at it.
23. Please DO NOT close this product to your ear as it may cause injury to your hearing.
24. USB charging cable equipped.
25. To comply with the command of the magnetic environment requirement formulated by the related national authorities, during the regulated period in certain areas, please stop using the transmitter of this model when such regulation command is issued.

FCC ID: 2AUYR-DSDR01A-11D
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.

FLY SAFE

Avoid leaping or getting near to the crowds, trees, high voltage power lines, buildings, airports or territorial waters, as well as high-intensity power line base stations as it may affect the drone’s compass.

Do not use the product under bad weather conditions, such as rain, snow, fog or when the wind speed exceeds 5m/s or 10mph.

Accessories List

Drone Overview

Replace the blades

1. Replace with a new blade at the corresponding position. Blade A should be installed on position A, while blade B should be installed on position B. If the blades are installed on the wrong position, the drone will be unable to be operated or controlled.
2. Bland A rotates clockwise and blade B rotates anticlockwise while flying.

TF Card Slot

1. Insert the TF card into the slot of the camera. The minimum capacity of TF card is 4GB and the maximum is 128GB. All images and video files will only be recorded on the TF card, not saved in the App or your phone. You can manually upload from the gallery to your phone. The package list does not tcontain TF card.
2. Before using TF card, please format it in FAT32 format on the computer. The drone only supports TF card in FAT32 format.

Under the Normal Situation

Attitude mode| Headlights (red lights) and rear lights (blue lights) keep on
---|---
GPS search condition| Headlights (red lights) keep on
Rear lights (blue lights) blink slowly and alternatively
GPS mode (default)| Headlights (red lights) keep on
Rear lights (blue lights) blink slowly at the same time
Headless mode| Headlights (red lights) blink slowly
Rear lights (blue lights) keep on (Attitude mode) Rear lights (blue lights) keep on (GPS mode)

Warning and Abnormal

slowly, right lights keep on
Vertical calibration: left lights keep on, right lights blink slowly
Emergency Stop or Rollover (Motor stopped)| Four lights blink quickly

Remote Control Diagram

Push the phone holder upwards as shown in the figure, insert one side of the phone into the bottom slot of the phone holder, and then pull the phone holder lever upwards until the phone is inserted.
After taking out the mobile phone, the stretching part of the mobile phone clip will automatically retract the mobile phone clip, and then put the mobile phone clip into the remote controller.

Three AAA batteries required in the remote controller (Please purchase the battery separately).

• The remote control uses 3 “AAA” non-rechargeable batteries, or “AAA” rechargeable batteries. (sold separately)
• Pay attention to the polarity of the battery when installing or replacing the battery.
• Non-rechargeable batteries are not rechargeable and can only be used with the same or the same battery as the recommended battery.
• Do not mix old and new or different types of batteries.
• Exhausted batteries should be removed in time, and discarded batteries should not be thrown.
• If you do not use it for a long time, please remove the battery to avoid damage to the product caused by battery leakage.

Charging the Aircraft’s Battery

Press the battery clip and pull the battery out then the battery can be taken out from the aircraft.

Lithium battery charging instructions

1. Taking out the USB charging cable, connecting the battery port to the charging head, then plug the USB terminal into the USB port on the computer (or USB power adapter) to charge the battery. The USB charger light stays red when charging, and the light stays green when charging is completed.
2. Aircraft’s lithium battery charging period is 240 minutes(depends on the charging power source ).

Notices for charging

1. Do not place the charged battery in a place of high temperature and heating, such as a flame or an electric heating device, otherwise damage or explosion will occur.
2. Do not strike or hit a hard surface with a battery.
3. Do not disassemble the battery.
4. Do not put the battery in water, the battery should be stored in a desiccative place.
5. Personnel must not leave when charging.

Operation Method

1| Ascend / Descend / Left / Right Turn| Use “left control stick” to control the altitude & rotation during flight.|
---|---|---|---
2| Forward / Backward / Left / Right| Use “right control stick” to control forward / backward / left / right during flight.|
3| Horizontal / geomagnetic calibration| Short press to enter horizontal calibration, long press 3S to enter geomagnetic calibration function.|
4| One key to take off / one key to land| Long press 1S as shown in the picture to enter one key to take off/one key to land function.|
5| One key to return| Short press the button shown in the picture to enter one key to return function.|
6| Speed thumbwheel| Three gear of high, medium and low speeds to adjust, turning thumbwheel to the left is downshift, turning thumbwheel to the right is shift up.|
7| GPS mode / Attitude mode| Long press 1S to switch GPS mode or attitude mode, the default is GPS mode. When entering GPS mode, the remote control makes a “beep” sound; when entering attitude mode, the remote control makes two “beep” sounds.|
8| Photo / Video| As shown in the picture, short press the camera button, the drone will take a photo. Long press the camera button, and the drone will record a video. Long press or short press the camera button again to exit the photo/video mode.|
9| Headless mode| In the headless mode, the operator does not need to recognize the position of the drone nose. It only needs to control the drone according to the direction of the joystick of the remote controller.|
10| Switch mode| Turn the switch to the left for Mode 1 (Left-hand throttle).
Turn the switch to the right for Mode 2 (Right-hand throttle)|
11| Emergency landing| When the drone encounters an obstacle or an emergency, press the speed button and the flip button on the remote controller at the same time as shown in the picture to make an emergency landing.|
12| Steering gear adjustment| Turn the thumbwheel left or right to adjust the angle of camera when the drone is in flight.|

About Aircraft

Flight Modes
P5G 2.7K / 4K adopts a new generation of flight control, which supports the following two flight modes.

GPS mode
GPS module can realize precise hovering, pointing flight and other intelligent flight modes. In the GPS mode, when the GPS signal is strong, GPS can be used for precise positioning; when the GPS signal is poor, the aircraft can not accurately locate, only provide attitude stabilization, and do not support intelligent flight function.

Attitude mode
Under this mode, the drone only provide attitude stabilization, which will produce drift in the horizontal direction. At this time, the operator needs to manually control the flight of the aircraft. This mode should be used with caution by novices. Please do not fly the aircraft too far (over the max flight range), so as to avoid the risk of losing aircraft and damage.

Circle Flight
Click the icon to enter circle flight mode.
Under normal flight conditions (flight altitude is greater than 5m), the drone will take the current position as the circling center by default, with a radius of 10m and a speed of 3m/s, and circle clockwise.

Follow Me Mode
Click icon to activate follow me mode.
When normal flight altitude is above 5m, and GPS signal is no less than 6, the drone will follow move position of mobile phone. In follow me mode, the drone can fly beyond the maximum distance limit of the fence.

Waypoint Flight Mode
Click the icon to start the waypoint flight mode.
Set multiple position points on the map, and the drone will fly in the order of set points (15 point at most). The map will identify the serial number of each point. The normal flight altitude is more than 5m, and the GPS signal is no less than 6. The drone flies to designated points on the map in the sequence of the number of points in the shortest path, and hovers at the last designated point.

Return to Home (RTH)
The aircraft has the function of automatic return. The takeoff point is the home point of the aircraft. The intelligent return function enables the aircraft to return to the home point. When the flight altitude is less than 20 meters, the aircraft rises to 20 meters before returning. When the flight altitude is more than 20 meters, and the aircraft will return with current altitude.
Note: The drone does not have automatic obstacle avoidance function. If the drone crashes into buildings or other obstacles on the way back, it will fall and break.

PotensicFly App

Search and download “PotensicFly” app.

P5G 2.7K / 4K operation guide (GPS version)

1. Long press the power switch of the drone for 1S to start the drone, and confirm that the camera’s WIFI  signal light (red light) enters the slow flashing state, indicating that the WIFI module is ready.

WIFI Connection (IOS)

• Go to the setting, swipe down to find the PotensicFly APP. Turn on the local network, WiFi and cellular network authorization.

• Enter the wireless settings of the mobile phone, click the WIFI name: Potensic_DSDR05x_xxxxxx.

Wifi connection (Android)
Enter the mobile phone WLAN settings, click to connect to the aircraft WIFI: Potensic_DSDR05x_xxxxxx, select in the mobile hotspot Internet network data detection prompt: Keep WLAN Connection.

• Open the PotensicFly APP, register and log in to enter the APP main page.

• After the connection is successful, click start to enter the APP flight interface to start your flight experience.

• If you need other help, please go to APP-Personal Center-Feedback and contact us.

Operation Interface

1. Home
2. Drone status
3. Transmission signal level
4. Drone power
5. Setting
6. Photo / Video switch
7. Photo Taking / Video Recording
8. Camera setting
9. Picture storage
10. Intelligent flight mode settings
11. One-key return
12. One-key take-off / One-key landing

Intelligent Flight Mode

1. Speed mode
2. Headless mode / Head mode
3. Horizontal calibration
4. Follow me mode
5. Geomagnetic calibration
6. GPS mode
7. Virtual joystick
8. Circling mode
9. Waypoint mode

Setting Interface

1. Main controller settings
2. Remote control settings
3. More

There are two remote control modes of this product, mode 1 and mode 2. Mode 1 is the default setting.

Malfunction Sloving Guideline

the drone
The remote controller’s battery is low and the power indicator will flash.| Change the remote controller’s battery
The frequencies of remote controller and the drone are not matched| Re-match the frequencies of the remote controller and the drone.
Response of control is not sensitive during flight| The remote controller’s battery is low or poor battery quality| Replace the battery with better quality
There are remote controllers with the same frequency is transmitting interference.| Change to a place that does not have devices with the same frequency to transmit interference.
Deflecting while hovering| No horizontal calibration| Do horizontal calibration again

Precautions

1. When the power supply (drone or transmitter) is insufficient, the remote-control distance will be shortened.
2. When the power of the drone is damaged, it will be not easy to take off or fly.
3. When the drone is damaged, please repair and stop using it in time, otherwise it may cause personal injury.
4. If you are not using the transmitter frequently, please remove the battery to avoid battery leakage.
5. Do not drop the transmitter from high or get it severely damaged, otherwise it will shorten the service lift of the transmitter.

Specification

Drone

• Maximum ascending speed: 3m/s
• Maximum descending speed: 2m/s
• Maximum horizontal flight speed: 5m/s
• Flight time: Max 18 minutes
• Working environment temperature: 0 ~ 40°C
• Working frequency: 2.402 ~ 2.483GHz
• Hovering precision (vertical): ±0.5m (when GPS works normally)
• Hovering precision (horizontal): ±1.5m (when GPS works normally)

Camera

• Photo shooting mode: Single photo
• Lens rotation range: +0° ~ 90°
• Image format: JPEG
• Video format: MP4(AVC/H.264)
• Micro SD card: 4-128GB with transmission speed of class10 and above.(not included) Working environment temperature: 0 ~ 40°C

Remote Control

• Working frequency: 2.402 ~ 2.483GHz
• Maximum effective distance of signal: Max 300m
• Working environment temperature: 0 ~ 40°C
• Battery: AAA batteries *3 (not included)

Battery

• Capacity: 1000mAh 7.4wh
• Voltage: 7.4V
• Battery type: Li Po 2S
• Working environment temperature: 0 ~ 40°C

Charging Cable

• Rated input: DC 5V/1A~2A
• Rated output: DC 7.4V/800mA
• Rated power: 8.88wh

Name| P5G 2.7K / 4K
Model| DSDR05C| DSDR05A
Resolution| 2.7K| 4K
Manufacturer| Shenzhen Deepsea Excellence Technology Co., Ltd.
Address| 5th Floor, Building 7, Hongfa High-tech Park, Keji 4th Road, Shiyan Street, Baoan District, Shenzhen
Battery information| Capacity: 1000mAh 7.4V 7.4wh
Adapter information| Input: 5V    1A~2A
Output: 7.4V    800mA
EC REP 1: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK
EC REP 2: Like Sun GmbH. Planckstr.59, 45147 Essen, Germany
www.potensic.com support@potensic.com MADE IN CHINA

CAUTION
This toy is recommended for children 14 years of age and older. To ensure that the child’s play is both safe and fun, please read the operating instruction and the general safety rules with your child.
Keep eyes, face, fingers and hair away from the rotor blade, tail blade and gear, as they will rotate at very high speed while the aircraft is flying.
Adult supervision is recommended when the aircraft is being operated.

WARNING
Warning: The product should only be used by adults and children over 14 years. Adult supervision is required for children under 14 years.

References

• Potensic Camera Drones-Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>