SIKO SATBSFU268KPN Fusion Shower Mixer Without Shower Set Instruction Manual

SIKO SATBSFU268KPN Fusion Shower Mixer Without Shower Set

Product Information

The product mentioned in the user manual is a set of different models of SATBSFU fittings and showers. The specific models mentioned are SATBSFU271, SATBSFU285, SATBSFU222, and SATBSFU268. The manual also mentions NDSIKOBSEL, NDSATFU, NDSIKOBSELNB, and NDSATFUNB as components or accessories related to the product. The manual provides cleaning recommendations and important information regarding the proper usage and maintenance of the product.

Product Usage Instructions

1. Cleaning Recommendation: To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning the fittings and showers.
   Follow these guidelines:

   • Do not use cleaning powders or sponge pads with an abrasive effect.
   • Avoid using microfiber cloths.
   • Use a specified cleaner dosage and contact time that is object-related and adapted to the needs.
   • Rinse the fittings and showers with clean water after using liquid soaps, shampoos, and shower foams to remove any residues.
   • If the surfaces are already damaged, they should be exchanged to prevent further damage.

2. Guarantee Terms: Damage caused by improper treatment will not be covered by guarantee. It is necessary to install filtration equipment distribution (corner valve filter) as per the guarantee terms.

3. Contact Information: For any further inquiries or assistance, you can contact SIKO KOUPELNY a.s. through the following channels:

   • Email: info@siko.cz
   • Website: www.siko.cz
   • Phone: +150 150 Please note that the provided usage instructions are based on the information extracted from the user manual. For precise and detailed instructions, it is recommended to refer to the complete user manual provided by the manufacturer.

DIMENSION

MOUNTING Instruction

Assembly

SATBSFU271

SATBSFU285

SATBSFU222

SATBSFU268

Cleaning Recommendation

To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning. At the cleaning of the fittings and showers, in principle, it must be pointed out:

• Only use cleaning material which is explicitly provided for this type of application.
• Never use cleaning materials, which contain hydrochloric acid, formic acid, chlorine pale lye or acetic acid, as they cause considerable damage.
• Phosphorus acidic cleaners are only conditionally applicable.
• Mixing cleaning agents is not permitted, generally.
• Never use cleaning materials or appliances with an abrasive effect, such as unsuitable clearing powders, sponge pads or micro fiber cloths.
• The instructions of the cleaning agent manufacturers have to be followed absolutely.
• Cleaning has to be carried out with a specified cleaner dosage, contact time, object-related and adapted to the needs.
• The building up of calcifications has to be removed by cleaning regularly.
• When using spray cleaners, spray first onto a soft cloth or sponge never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.
• After cleaning rinse thoroughly with clean water to remove any cleaner residue.
• The use of steam cleaners is not permitted. The high temperatures can damage the products.

Important
Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after using.
The damage of already damaged surfaces will deteriorate under the effect of the cleansers. Components with damaged surfaces must be exchanged, otherwise there could be an injury danger.

Damage caused by improper treatment will not be covered by guarantee.
Under terms of the guarantee is necessary to install filtration equipment distribution (corner valve filter).

Precaution

Contact
SWISS AQUA TECHNOLOGIES CZ S.R.O.
SKORKOVSKA 1310, KYJE, 198 00 PRAHA 9
ICO: 08028834

References

• cleaning.at

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>