KITSOUND KSBMCB Boomcube Wireless Speaker User Manual

BOOMCUBE WIRELESS SPEAKER
User Manual

Please read this manual carefully before use.

Box contents

• KS BoomCube Wireless Speaker
• Micro USB charge cable
• 3.5mm auxiliary cable
• User manual

Functions

1. Multi-function button (MFB)/LED indicator
2. Micro USB charging port
3. Aux-in port

Instructions for use

Charging the speaker
Give the speaker a full charge before its first use.

1. Plug the micro USB charge cable into the Micro USB charging port (2) and plug into a power source
2. The LED indicator (1) will be red whilst charging
3. A full charge will take up to 2 hours
4. Once fully charged the LED indicator (1) will turn off

Note: Allow up to 3 hours for the first charge.

Pairing the speaker to your device

1. Turn the BoomCube on by holding the MFB (1) for 2 seconds
2. The BoomCube will automatically enter pairing mode if a previously paired device is not detected
3. The LED indicator (1) will flash blue and green whilst in pairing mode
4. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
5. Select ‘KS BoomCube’. If asked for a passcode, enter ‘OO00’
6. Once paired, the speaker will play an audio tone and the LED indicator (1) will glow blue

Note: ‘Bluetooth’ is a trademark of Bluetooth SIG, Inc.
This product is in no way affiliated with or endorsed by Bluetooth SIG Inc.
Re-pairing or pairing new devices

1. Turn wireless off on any previously paired devices
2. Follow the ‘Pairing the speaker to your device’ instructions
   OR
   1. Turn off the speaker by holding the MFB (1) for 2 seconds
   2. Turn the speaker on again and re-enter pairing mode by holding the MFB (1) for 5 seconds
   3. Follow the ‘Pairing the speaker to your device’ instructions

Playing music on your speaker
Wireless
When connected wirelessly, play the music on your device and the sound will play through the speaker. Some devices may require you to select the audio output. When music is playing the LED indicator (1) will flash blue once every 3 seconds.

1. Short press the MFB (1) to Play/Pause the track
2. Double press the MFB (1) to skip to the next track

Note: The volume of the BoomCube is controlled using the connected device.
Auxiliary

1. Plug a 3.5 mm auxiliary cable into the speaker’s Aux-in port (3) and your device
2. The LED indicator (1) will flash green once every 3 seconds
3. The BoomCube will play an audio tone when the auxiliary cable is recognised
4. When in auxiliary mode, the speaker can be muted by pressing the MFB (1)

Note: Track controls will not be active during this mode.
Please note: Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted signal.
To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion.

Care for your BoomCube

Please DON’T:

• Get your BoomCube wet
• Drop the BoomCube as this will invalidate your warranty
• Open up the BoomCube. There are no user serviceable parts inside
• Expose the BoomCube to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO:

• Clean the BoomCube with a soft dry cloth and no detergents

Specifications

Works with Bluetooth® V4.1

Wireless connectivity distance| up to 10 m
S/N| 82 dB
Frequency response| 20 Hz – 20 kHz
Drivers| 45 mm
Output RMS| 3 W @ 4 ohm
Play time| up to 6 hours
Charging time| up to 2 hours

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at: support@kitsound.co.uk
Hereby, Kondor Ltd declares that the radio equipment type, KSBMCB BoomCuhe, is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents
The use and operation of this speaker is beyond our control. Warranty of the KS BoomCube is limited to defects caused by faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
This does not affect your statutory rights.
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.kitsound.co.uk
All trademarks are acknowledged as the property of their respective owners.
Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein.
Your product and batteries must be recycled or disposed of properly.
Please contact your local recycling centre for more information on proper disposal.
Do not dispose of Lithium Polymer batteries with general waste.
Please return it to battery recycling collection point

JB. 5376-b / KSBMCB /
Made in China.
© KitSound is a trademark of Kondor Limited, 2017.
Christchurch, Dorset, BH23 4FL, UK

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>