Potensic Dreamer Mini P5 FPV Drone with 2.7K Camera Live Video for Adults and Kids User Manual

Potensic Dreamer Mini P5 FPV Drone with 2.7K Camera Live Video for Adults

and Kids

Disclaimer and Note

Dear Customers:
Thank you for purchasing this product. In order to operate the drone conveniently and safely, please read all instructions and warnings carefully before operating. Please also keep the instruction manual for future reference and maintenance.

• IMPORTANT

1. This product is not a toy. It is a precision device, integration machinery, and electronics with air mechanics and high-frequency transmission. It requires correct assembly and debugging to avoid any accident. The user should operate and control this product in a safe manner. In case of incorrect operation, it may cause serious injury or property damage. It can also be lost due to incorrect operation. We should assume no responsibility, because we can not control the process of assembly, use, and operation of the aircraft.
2. This product is suitable for experienced UAV pilots aged 14 and above.
3. Flying place must be a locally legal flying site for R/C model.
4. Once the product is sold, we will assume no safety responsibility arising from using, operating, and control of the aircraft.
5. In the event of a problem during use, operating of maintenance, please contact us by email, we will respond to you within 24 hours.

• SAFETY PRECAUTIONS
  The R/C aircraft model can be dangerous when in use, please make sure you keep it far away from any person or spectators when flying. Artificial incorrect installation or body damage, poor electronically-controlled device, or unfamiliarity with operation may cause damage to the aircraft or injure people or cause an unexpected accident. Please pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an accident due to your own negligence.

• PREFLIGHT PRECAUTIONS

1. Check if the battery levels of transmitter and receiver are saturated.
2. Check if throttle Joystick and throttle of the transmitter are trimmed at the center position before power-on.
3. Be sure to follow the ON/OFF sequence of power source upon power-on. Be sure to turn on the power of transmitter upon power-off. Incorrect ON/OFF sequence may cause the uncontrolled status of aircraft, thereby influencing personal safety. Please develop correct ON/OFF habit.
4. Check if the connection between the battery and such parts as motor is firm and reliable. The continuous vibration of aircraft may cause loss of power connector, thereby resulting in uncontrolled status of aircraft.
5. Keep it far away from any structures or crowds. The R/C aircraft may danger. Therefore, please keep it far away from crowds, buildings, trees, structures, high voltage wire, etc. Please also avoid flying in adverse weather conditions such as rain, electrical storms, and high winds to ensure safety of the user, any spectators, and surrounding property.
6. Keep it away from any moist environment. The inside of the aircraft is composed of many precision electronic and mechanical parts. Therefore, please try to avoid any moisture or water content from entering the main body of the aircraft as it may cause a breakdown of the electronic and mechanical parts and thus cause an accident!
7. Only operate with included parts for intended use. Please use the original parts for any upgrade, re-equipping, or maintenance to ensure flying safety. Please operate and use only under the scope of the product function permitted. DO NOT use for any illegal purpose or use beyond the scope of which your local laws and regulations have stipulated.
8. Avoid controlling it independently. New users may have certain difficulties during the early stages of learning to operate the aircraft. Please try to avoid operating the aircraft alone. When available always operate the aircraft under the guidance of a more experienced user.
9.  Safe operation Please operate the R/C aircraft according to your own state and flying skills. Any fatigue, bad mental state, or incorrect operation may increase the probability of accidental risk.
10. When the operator is flying at high speed, please keep the aircraft far from the pilot and any surrounding persons or objects so as not to cause danger or damage.
11. The R/C aircraft is composed of materials such as metal, fiber, plastic, electronics, etc. Therefore, please keep it away from any heat source and avoid prolonged exposure to direct sunlight. Excessive heat exposure can cause distortion and damage.

WARNING

1. There is important information contained in this package and instruction manual, please keep it for future reference.
2. You have the responsibility to make sure that this model of aircraft won’t cause injury to others’ bodies or cause any damage to property.
3. Please operate strictly as shown on the instruction manual when debugging or assembling this aircraft. During the process of flying or landing, be sure to keep a distance of 1-2 m away from the user or other persons so as to avoid injuring the head or face, or body.
4. Our company and distributors won’t be responsible for any incorrect operation, which may cause loss or damage, or injury to the body.
5. Children aged 14 and above should use this product under the guidance of an adult. This product is FORBIDDEN to be used by children under 14 years old.
6. Please correctly assemble and use this product as shown on the instruction manual or packing instruction. Some parts should be assembled by an adult.
7. Small parts are included with this product. Please place it beyond the reach of the children to avoid a CHOKING HAZARD or parts being mistakenly swallowed.
8. Playing on the road or near high traffic areas is strictly FORBIDDEN so as not to cause an accident.
9. Please dispose of the packing material timely so as not to cause injury to children.
10. Please DO NOT disassemble or re-equip the aircraft as it may cause a breakdown of the aircraft during flying.
11.  Please use the original charging cable.
12. The remote control uses 1.5V/AAA batteries (not included).
13. Only the original charger made by our factory can be used.
14.  Charger is not a toy.
15.  When charging the battery, please conduct it under the surveillance of an adult. Please also keep it far away from any combustible object when charging. Please keep this aircraft within eyesight when charging.
16. Please DO NOT make it short-circuit or squeeze the battery so as not to cause an explosion.
17. DO NOT mix the lithium battery with a different type of battery.
18. Please DO NOT make the batteries short-circuited or decompose the batteries or throw the batteries into the fire; DO NOT place the batteries near the high temperature or heated area (such as near the fire or near the electric heating device.)
19. Aircraft should be kept far away from any other electric compliance or equipment as far as possible or kept far away from the place where there is a magnetic object nearby as they may cause interference with each other.
20. Please keep a safe distance from the high-speed rotating rotor so as not to cause the danger of being twisted, wounded, or cut.
21. Engine will heat up. Please DO NOT touch it to avoid being burned or injured.
22. The Light Emitting Diode can send out laser radiation. Please DO NOT shoot the light beam directly at someone and do not stare directly at it.
23. Please DO NOT close this product to your ear as it may cause injury to your hearing.
24. USB charging cable equipped.
25. To comply with the command of the magnetic environment requirement formulated by the related national authorities, during the regulated period in certain areas, please stop using the transmitter of this model when such regulation command is issued.

FCC ID: 2AUYR-DSDR01A-11D

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FLY SAFE

Accessories List

Drone Overview

• Replace the blades

1. Replace with a new blade at the corresponding position. Blade A should be installed on position A, while blade B should be installed on position B. If the blades are installed on the wrong position, the drone will be unable to be operated or controlled.
2. Bland A rotates clockwise and blade B rotates anticlockwise while flying.

• Micro SD Card Slot (Only for DSDR05B model)
  Insert the micro SD card into the slot of the camera. The minimum capacity of SD card is 4GB and the maximum is 128GB. All images and video files will only be recorded on the SD card, not saved in the App or your phone. You can manually upload from the gallery to your phone. The package list does not contain SD card.

Drone Light Status

• Headless mode
  Front lights (Red) blink slowly
  Rear lights (Blue) on stably

• Drone Low Power
  Four lights blink slowly

• Drone Disconnected
  Four lights blink quickly

• Emergency Stop or Rollover (Motor stopped)
  Four lights blink quickly

Remote Control Diagram

Push the phone holder upwards as shown in the figure, insert one side of the phone into the bottom slot of the phone holder, and then pull the phone holder lever upwards until the phone is inserted. After taking out the mobile phone, the stretching part of the mobile phone clip will automatically retract the mobile phone clip, and then put the mobile phone clip into the remote controller.

Three AAA batteries required in the remote controller (Please purchase the battery separately).

1. The remote control uses 3 “AAA” non-rechargeable batteries or “AAA” rechargeable batteries. (sold separately)
2. Pay attention to the polarity of the battery when installing or replacing the battery.
3. Non-rechargeable batteries are not rechargeable and can only be used with the same or the same battery as the recommended battery.
4. Do not mix old and new or different types of batteries.
5. Exhausted batteries should be removed in time, and discarded batteries should not be thrown.
6. If you do not use it for a long time, please remove the battery to avoid damage to the product caused by battery leakage.

Charging the Aircraft’s Battery

Press the battery clip and pull the battery out then the battery can be taken out from the aircraft.

Lithium battery charging instructions

1. Taking out the USB charging cable, connect the battery port to the charging head, then plug the USB terminal into the USB port on the computer (or USB power adapter) to charge the battery. The USB charger light stays red when charging, and the light stays green when charging is completed.
2. Aircraft’s lithium battery charging period is 150 minutes(depending on the charging power source ).

Notices for charging

• Do not place the charged battery in a place of high temperature and heating, such as a flame or an electric heating device, otherwise, damage or explosion will occur.
• Do not strike or hit a hard surface with a battery.
• Do not disassemble the battery.
• Do not put the battery in water, the battery should be stored in a desiccative place.
• Personnel must not leave when charging.

Operation Method

PotensicFly App

Search and download “PotensicFly” app.

• For smartphones with Android 5.0+: Search and download “PotensicFly” from Google Play.
• For smartphones with iOS 9.0+: Search and download “PotensicFly” from App Store.

Operation Interface

1. Home
2. Drone status
3. Transmission signal level
4. Drone power
5. Setting
6. Photo / Video switch
7. Photo Taking / Video Recording
8. Camera setting
9. Picture storage
10. Intelligent flight mode settings
11. One-key take-off / One-key landing

Intelligent Flight Mode

1. Speed mode
2. Headless mode / Head mode
3. Horizontal calibration
4. Virtual joystick
5. Gravity mode
6. Trajectory flight

There are two remote control modes of this product, mode 1 and mode 2. Mode 1 is the default setting.

Specification

• Drone
  Maximum ascending speed: 3m/s
  Maximum descending speed: 2m/s
  Maximum horizontal flight speed: 5m/s
  Flight time: Max 20 minutes
  Working environment temperature: 0 ~ 40°C
  Working frequency: 2.402 ~ 2.483GHz

• Camera
  Photo shooting mode: Single photo
  Lens rotation range: +0° ~ 90°
  Image format: JPEG
  Video format: MP4(AVC/H.264)
  Micro SD card: 4-128GB with a transmission speed of class10 and above(not included) Working environment temperature: 0 ~ 40°C

• Remote Control
  Working frequency: 2.402 ~ 2.483GHz
  Maximum effective distance of signal: 1080P Max 100m / 2.7K Max 200m
  Working environment temperature : 0 ~ 40°C
  Battery: AAA batteries * 3 (not included)

• Battery
  Capacity: 1500mAh 5.55wh
  Voltage: 3.7V
  Battery type: Li Po 1S
  Working environment temperature: 0 ~ 40°C

• Charging Cable
  Rated input: DC 5V/1A
  Rated output: DC 3.7V/850mA
  Rated power: 5.55wh

Name Dreamer mini
Model| DSDR05D| DSDR05B
Resolution| 1080p| 2.7k
Manufacturer| Shenzhen Deepsea Excellence Technology Co., Ltd.
Address| 5th Floor, Building 7, Hongfa High-tech Park, Keji 4th Road, Shiyan Street, Baoan District, Shenzhen
Battery information| Capacity: 1500mAh, 3.7V 5.55wh

Adapter information

| Input: 5V    1A
Output: 3.7V    850mA

EC REP 1: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

EC REP 2: Like Sun GmbH. Planckstr.59, 45147 Essen, Germany

www.potensic.com support@potensic.com MADE IN CHINA

CAUTION
This toy is recommended for children 14 years of age and older. To ensure that the child’s play is both safe and fun, please read the operating instruction and the general safety rules with your child. Keep eyes, face, fingers and hair away from the rotor blade, tail blade and gear, as they will rotate at very high speed while the aircraft is flying.
Adult supervision is recommended when the aircraft is being operated.

WARNING
The product should only be used by adults and children over 14 years. Adult supervision is required for
children under 14 years.

DSDR05D :214-113197
DSDR05B :214-113196

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>