Potensic ATOM Series Parallel Charging HUB User Manual

: June 14, 2024
: Potensic

Table of Contents

Important Information
Disclaimer
Precautions
Part Name
Introduction
Charging
Check Battery Power
Fault Reminder
Specifications
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Potensic ATOM Series Parallel Charging HUB

Potensic ATOM Series Parallel Charging HUB

Important Information

DANGER
Only suitable for age 14+

Disclaimer

To ensure the safe and correct use of this product, please strictly follow the operating instructions and precautions in this manual.
Kids under the age of 14 should play this product under the supervision and guidance of adults. Keep this product out of the reach of children when not in use.
The company is not responsible for direct or indirect losses (including but not limited to property damage and personal injury) caused by the user’s violation of the safety operation instructions in this manual, and does not provide warranty services.
When using the Potensic Atom series parallel charging HUB (hereinafter referred to as “Charging HUB”) to charge the battery, the original adapter must be used, and Potensic is not responsible for the consequences of using non-original chargers.
Please do not disassemble or modify this product without authorization. If there is any violation, the user will be responsible for the consequences.
If you have any problems with use, operation, maintenance, etc., please contact the local dealer or the relevant personnel of the company.
Potensic reserves the final interpretation right of this document and related product documents, and is subject to change without notice. Please visit www.potensic.com for the latest information.

Precautions

When using, please place the charging HUB stably and away from heat sources.
Please do not touch the battery terminals or power plug with your hands or metal.
Please do not stack items on the adapter and charging HUB, and keep them away from water and flammable materials when using.

Part Name

Battery compartment
Battery terminals
Charging indicator
Battery Power Check Button
USB interface (OUT)
Power interface (IN)

Introduction

The Potensic Atom series parallel charging HUB can charge three Atom intelligent batteries at the same time, and the
USB interface can be used for the remote control or other devices charge .
The box-like design makes it easy to carry and protect the battery.
Press the Battery Power Check Button, the indicator will light on to help you know the battery power before flying.

Charging

As Figure A, insert the battery and press it until you hear a “click”, the battery is installed correctly. Then connect the adapter with the charging HUB and plug in.
Users can insert 1-3 batteries at will, and the charging HUB will automatically identify the batteries and charge it. When charging, the charging indicator lights of each battery keep flashing in sequence.
After fully charged, the corresponding indicator lights will be always-on. Remove the battery as shown in Figure B.
The USB interface can charge the remote control or other USB devices (5V/1A).

The charging HUB supports hot swapping of batteries without turning off the power. After fully charged, it is recommended to wait for the red power indicator of the battery to go out before unplugging the battery.

Check Battery Power

After a battery is inserted or unplugged from the charging butler, the corresponding battery indicator will turn on.
Displays the battery level and turns off after 5 seconds. Or check by short pressing the button Check the power.

LED 1

|

LED 2

|

LED 3

|

LED 4

| Corresponding Battery Power
---|---|---|---|---
| | | | 0%~25%
| | | | 25%~50%
| | | | 50%~75%
| | | | 75%~97%
| | | | 97%~100%
Always-on Flickering Off

Fault Reminder

When the battery is inserted, the corresponding indicator light is shown in the figure, indicating that there is a fault.

Abnormal battery temperature: Indicates that the battery temperature has exceeded the safe charging temperature range. The charging HUB will prevent charging until the battery temperature returns to normal.

Battery failure: It may caused by battery communication failure, battery cell failure, device short road.

LED 1	LED 2	LED 3	LED 4	Fault Type
			Abnormal battery temperature

			Battery failure

Always-on Flickering Off

Specifications

Model	DSBC02A
Weight	About 137g(Without battery)
Working Temperature	5℃-40℃
Adaptable Battery	DSBT02A (2500mAh)

(3450mAh)
Output| 8V/2.2A 3| 8V/2.0A 3| 8V/1.6A * 3
USB Output|

5V/1A

Charging Time| ≈1.5 hours| ≈1.3 hours| ≈2.6 hours
Adapter Specifications| Input: 100-240V, 50/60HZ Output: 12V/5A-60W

The charging HUB can charge 3 batteries at the same time, and supports mixed use of 3 adaptable battery in the above table.

FCC Requirement: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CE compliance: This device complies with EN55032&EN55035&EN62368 standards, which means this device will not do harm to the user or products as following situations:

Electric shock
High temperature
Radiation
Explosion from inner
Mechanical Harm
Fire Hazard
Chemical burns.

EU Conformity Statement : This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EC, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863.

WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info

2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Symbols
EC REP: E-CrossStu GmbH. Mainzer Landstr.69,60329 Frankfurt am Main
UK REP: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK