FEELWORLD F970 F5 Pro V3 5.5 Inch Touchscreen Monitor User Manual
- June 11, 2024
- FEELWORLD
Table of Contents
F970 F5 Pro V3 5.5 Inch Touchscreen Monitor
Product Overview
The Touchscreen Monitor F970 Install and Power Kit is designed
with a Sony F970 external install and power kit at the back of the
monitor. This external kit can be used to install external
equipment like wireless transmitters, LED lights, and video
converters that can be powered by Sony F970 battery. The monitor
also comes with a battery plate, and you can use the power adapter
supply or external battery for power supply.
Features
-
Touch screen menu operation
-
IPS Full HD 1920×1080 LCD panel
-
Support 4K HDMI input and output
-
User custom 3D LUT import by Type-C to USB
-
All waves Histogram is a quantitative tool to inspect the image
brightness, to guide the exposure control -
Focus Assist (Focus edge can be Red, Green, Blue)
-
Embedded Audio
-
Zebra and False Color function, convenient to guide the using
light when shooting and the post-production -
Check Field (Red, Green, Blue, Mono)
-
Image Zoom-in function
-
Anamorphic Mode
-
Image Flip (H, V, H/V)
-
Image Freeze
-
Image Nine Grid, zoom one of the images to realize the full
screen -
Pixel to Pixel Ratio Marker, Safe Frames, and Center
Marker -
Brightness, Contrast, Sharpness, Tint, Saturation, and Color
Temp Adjustment -
3.5mm earphone output
-
DC 8.4V power out to power your DSLR camera or mirrorless
camera -
External sunshade, sunlight readable
Usage Instructions
To ensure the best use of the unit, please read the user manual
carefully. Please avoid heavy impact and dropping the product onto
the ground when moving it. The screen is made of glass, so please
do not drop the screen towards the ground to avoid injury if the
screen is broken. Keep the product away from heat sources and avoid
prolonged exposure to sunlight as the LCD screen can be
damaged.
To avoid damaging the product, do not take it apart or repair it
by yourself without adjustable components in the unit. The rear
cover of the monitor is equipped with an F970 battery plate.
Button Instruction
Button F1 and F2 are custom buttons that function when OSD is
not displayed. These buttons decrease or increase the volume or
backlight. The MENU button displays the OSD Main menu, and the
power on/off button turns the device on or off.
If OSD is displayed, F1 and F2 become buttons to decrease or
increase the value of the selected parameter. The MENU button
returns to the previous OSD menu, while / and / select the next or
previous menu item.
Port Instruction
The DC OUT 8.4V is a DC power output interface with polarity as
the output power. It has a barrel output for powering your camera
with a separately available DC coupler via adaptor (NP-FW50 Sony
& LP-E6 Canon&DMW-BLF19 Panasonic). The 3.5mm earphone port
output serves as an earphone output.
The DC IN 5V (Type-C) is a Type-C power input recommended for
local power supply only. It is not recommended to connect other
devices to provide loop-out power. The HDMI IN is a V1.4 HDMI
signal input that supports up to 4K@30Hz, while the HDMI OUT is a
V1.4 HDMI signal output that also supports up to 4K@30Hz. The DC IN
12V is a DC power input with polarity as the input power.
5.5 Touchscreen Monitor
F970 Install and Power Kit
User Manual
Product Overview
Thank you for purchasing our 5.5 inch Full HD touch screen monitor. This
monitor has HDMI input and output, auxiliary power output, touch screen menu
operation, support user 3D LUT upload, etc. It has small size, simple
operation, portable convenience and wide application range. Advanced features
include Histogram, Embedded Audio, Focus Assist, False Colors, Over Exposure,
Center Marker, Safe Frames, Ratio Marker, Check Field, Image Freeze, Zoom,
Anamorphic etc. It is an ideal, portable and lightweight viewfinder and video
monitor.
A Sony F970 external install and power kit design is added to the back of the
monitor. The external kit can be used to install and install the external
equipment, like wireless transmitter, LED light, video converter and others
which can be powered by Sony F970 battery. The monitor is equipped with a
battery plate; you can use the power adapter supply or use the external
battery for power supply.
To insure the best use of the unit, please read the user’s manual carefully
CAUTION
Please avoid the heavy impact and drop onto the ground when move the product.
The screen of this product is made of glass. Please do not drop the screen
towards the ground. Keep away from injury if the screen is broken.
Keep the product away from the heat source, and avoid the prolonged exposures
to the sun as the LCD screen will be damaged.
To avoid damaging the product, please do not take apart or repair the unit by
yourself without the adjustable components in the unit.
1
In order to better maintain the LCD screen and protect the cover, please
follow the following ways to avoid damages. 1. Please refrain from using the
hard objects to hit the screen. 2. Please do not force to wipe the screen. 3.
Please do not use the chemical solutions to clean the screen. 4. Please do not
spray any detergent on the screen. 5. Please do not write on the screen
directly. 6. Please do not stick on the screen. 7. Please simply wipe with a
clean soft cloth and make sure no water on the screen.
Features
Touch screen menu operation IPS Full HD 1920×1080 LCD panel Support 4K HDMI
input and output User custom 3D LUT import by Type-C to USB All waves
Histogram is a quantitative tool to inspect the image brightness, to guide
the exposure control Focus Assist (Focus edge can be Red, Green, Blue)
Embedded Audio Zebra and False Color function, convenient to guide the using
light when
shooting and the post production Check Field (Red, Green, Blue, Mono) Image
Zoom-in function Anamorphic Mode Image Flip (H, V, H/V) Image Freeze
2
Image Nine Grid, zoom one of the images to realize the full screen Pixel to
Pixel Ratio Marker, Safe Frames and Center Marker Brightness, Contrast,
Sharpness, Tint, Saturation and Color Temp
Adjustment. 3.5mm earphone output DC 8.4V power out to power your DSLR camera
or mirrorless camera External sunshade, sunlight readable
CONTENTS
1. Product Description —————————————– 4 1.1 Button Instruction
——————————————— 5 1.2 Port Instruction (Bottom) ———————————— 5 1.3 Port
Instruction (Left) —————————————- 6 1.4 Power Supply Way ——————————————- 7 1.5
Sony F970 Install and Power Kit ————————– 8 1.6 Mount Points ————————————————–
10 1.7 Sunshade —————————————————— 11 2. Menu Operation Instruction ——————————
12 3. Menu Function Instruction ——————————– 14 4. Technical Parameters
————————————— 19 5. Trouble Shooting ——————————————— 20
3
1. Product Description
Front Panel
Back Panel
4
1.1 Button Instruction
Button F1 F2
MENU
Function when OSD is not displayed Custom button F1
Custom button F2
Decrease the volume or backlight Increase the volume or backlight Display OSD
Main menu
/
/ Power On/Off button
Function when OSD is displayed /
/
Decrease or adjust value of selected parameter Increase or adjust value of
selected parameter Return to previous OSD menu
Select next menu item
Select previous menu item
1.2 Port Instruction (Bottom)
DC OUT 8.4V: DC power output interface, polarity as the output
power
Barrel output for powering your camera with a
separately available DC coupler via adaptor (NP-FW50 Sony &
5
LP-E6 Canon&DMW-BLF19 Panasonic). More adapters coming soon.
: 3.5mm earphone port output DC IN 5V (Type-C): Type-C power input. It is
recommended to be used for local power supply only. It is not recommended to
connect other devices to provide loop-out power. 1.3 Port Instruction (Left)
HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz. HDMI OUT: V1.4, HDMI signal
output, up to 4K@30Hz. DC IN 12V: DC power input, polarity as the input power
6
1.4 Power Supply Way (1) The rear cover of the monitor is equipped with a F970
battery plate,
which is applicable to F970 series of batteries. Sony F970 battery plate for
battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530
series.
It is recommended to use standard original F970 battery. When using battery
power supply: two power output interfaces (DC OUT 8.4V interface and external
install and power kit) can be connected to other device. When powering other
device, it is recommended to choose a battery with a larger capacity, so the
longer the use time.
Remark: Please take off the battery from the monitor if you don’t use the
monitor in a long time. (2) The left side of the monitor has a DC 12V input
power port (5.5mm outer, 2.1mm inner) and supports 7 ~ 24V wide voltage. The
DC power adapter needs to be purchased separately.
When using external adapter input: two power output interfaces (DC OUT 8.4V
interface and external install and power kit) can be connected to other
devices. When powering other equipment, it is recommended to equip at least 3A
power adapter.
(3) The bottom of the monitor has a Type-C 5V input power port.
This port can be connected to the power bank for power supply and is not used
for data transmission; it is recommended to be used only for local power
supply, and it is not recommended to connect other devices to provide loop-out
power.
7
1.5 Sony F970 Install and Power Kit A Sony F970 external install and power kit
design is added to the back of the monitor. The external kit can be used to
install and install the external equipment, like wireless transmitter, LED
light, video converter and others which can be powered by Sony F970 battery.
The kit has two cross grooves, you can adjust the position of the external
device by loosening 2 screws up and down / left or right, or install the kit
upside down. When you don’t need the kit, you can loosen the screws and remove
the kit. Note: Before disassembling the kit, make sure that the monitor is
turned off, and then remove the battery or power adapter. (1) Just move the
kit: Loosen 2 screws, and then adjust up / down / left / right. (2) Remove the
external device: After the plug-in device is installed on the kit, if
your plug-in device has a locking button, and it is more difficult to press it
to remove it by hand, then you can use our assisting tool to disassemble.
8
(3) Steps to remove the kit: . Loosen the 2 screws. . Use both hands to move
the kit up. . Move the round holes to the corresponding 2 screws.
(You can also install the kit upside down.)
. Then gently lift the kit upwards and carefully disassemble the 2P power
cord. . Then remove the 2 screws. (4) Install back to the kit: first screw the
2 screws back to the screw hole used to
install the kit on the back of the monitor, install the 2P power cable to the
cutout, then align the round hole of the kit with the screw, and then push the
kit to the screw at the center of the kit cross, then tighten the screws.
9
1.6 Mount Points (1) ¼-20 Thread Points
There are (4) ¼-20 thread points (top, bottom, right side & Back center) can
be easily connected to the hot shoe mount, tripod fixed installation.
(2) Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Arm via shoe mount
or 1/4″-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring
at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment
(like a microphone, LED light, or wireless receiver) that would otherwise be
displaced from the camera’s accessory shoe.
10
1.7 Sunshade Sunshade
Sunshade Frame
Fixed Frame
Sunshade Application
First lock the Sunshade Frame with the monitor tight . Open the sunshade , and
match the sticker on the sunshade inside to the marked part of the sunshade
frame , smooth and press 3 sides on the sunshade, and then complete the
sunshade
installation .
11
2. Menu Operation Instruction
After the monitor is correctly connected to the power supply, the indicator
light is on (red), long press , turn on the monitor, the indicator light turns
yellow, and after the HDMI signal is input, the indicator light turns green.
(1). Touch screen menu operation (default touch screen is on) Double-click on
the screen to open the main menu (on the left side of the
screen) and click on the corresponding menu to display the secondary menu. You
can enter the corresponding function option to select or set with the “<” or
“>” key of the option. To exit the menu, click outside the menu to exit. Swipe
up from the bottom of the screen to open the shortcut menu and click on the
corresponding menu to open or set the corresponding function. Double-click the
shortcut menu function and select the function setting with the “<” or “>”
key. On the left side of the screen (1/2 split screen), you can directly
adjust the brightness of the screen backlight; on the right side of the screen
(1/2 split screen), you can directly adjust the volume.
Figure:
12
(2) Button Menu Operation
When the menu is not displayed, directly press the “<” or “>” button to
adjust the volume or backlight. You can set the left and right buttons in the
menu
Left Right Key Set to set the volume or backlight.
Press the “MENU” button to open the main menu (on the left side of the screen), press “” or “” to select the secondary menu, press “>” to enter the secondary menu, and then press “” or “” to select the secondary menu Menu options. After selecting the secondary menu option, press “<” or “>” to adjust the parameter value. After adjusting to the preset parameters, press the “” or “” button to enter the next adjustment. After adjustment, press “MENU” to exit.
After booting, you can choose to turn on or off the screen touch function in
the Touch Switch in the
(the touch screen is turned on by default).
In the closed state, you need to select the Touch Switch option according
to the step of the Button Menu Operation, and then press the “<” or
“>” button to turn on the touch function.
13
3. Menu Function Instruction
All Waves
Waveform
Vector Histogram Waves Trans. Focus Assist
Peaking Color
Off, On After turning on, waveform, vector, histogram and embedded audio will
be shown. Off, RGB, Y, YUV This essential feature assists with the calibration
of professional video cameras. It shows the overall brightness of the image
assisting the video professional in correcting exposure. The waveform feature
also checks the evenness of the lighting when lighting a chromakey or
background. Off, On shows how saturated the image is and where the pixels in
the image land on the color spectrum. Off, RGB1, Y, RGB2 Off, 25, 50, 75 Off,
On By sharpening the edge of images to help photography for focusing
operation. Red, Green, Blue Due to the image color is colorful when shooting
in natural light, so the user may react to the edge of the single line not too
sensitive, at this time to change the auxiliary focal edge line color will
improve the sensitivity of the image contour. It is convenient during filming
14
Embedded Audio
tracking in focus. The edge line color can be chosen according to the site situation to select red, green and blue. Off, On The Audio Level Meters provide numerical indicators and headroom levels. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
Nine Grid Safe Frames Center Marker Ratio Marker
Mark Color
Mark Width
Modified Mark
Off, On Off, 80%, 85%, 90%, 93%, 96%, 2.35:1 To select the screen marker. Off,
On Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1 Image display ratio
marker. Red, Green, Blue, Black, White To select the above high contrast mark
color according
to different image. 17 To select the above mark color display width. 05 Adjust
the brightness of the image outside tag line to
highlight the inside tag line of image.
15
Scan Mode Aspect Ratio Anamorphic Anamorphic nX
Image Flip OSD Flip Zoom Mode Zoom All
Nine Grid Zoom
Zoom Image Freeze
Under Scan, Over Scan
Auto., 4:3, 16:9, Just Scan, Panorama, P2P
Off, 1.3X, 2.0X, 2.0X MAG, User
Under the User, the Anamorphic nX can be
customized.
1.20X~2.00X
Off, H Flip, V Flip, H_V Flip
Off, On
Off, Mode1, Mode2
The Zoom All can be customized.
0500
Off, On
Open the Nine Grid function in the
to divide the
image into nine grid, then turn on the Nine Grid Zoom
function, select one of the screens by pressing the “<” or
“>” key, and then press the “” or “” key zoom in to
full screen. Press the “” or “” key to exit the local
zoom function. (To achieve this function, you need to
turn on the Nine Grid function first, and it can only be
operated by keys.)
Off, 4X, 9X, 16X
Off, On
16
Lut Switch
Lut Table
Lut Import (type C)
Color Temp.
Red Green Blue Backlight
Pic. Mode
Brightness Contrast Saturation Sharpness
Tint
OFF, ON
After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC,
VLOG).
Show the 4 built-in Lut and the custom load Lut After copying the 3D LUT file
to the U disk and inserting it into the TYPE-C to USB Connector, you can click
the “<” or “>” key in the Lut Import(type C) to import the 3D LUT file. 5600,
6500, 9300, User Under the User, the red, green and blue of the image can be
adjusted. 0255 0255 0255 0100 Standard, Mild, User, Dynamic Under the User,
you can adjust the image Brightness, Contrast, Saturation, and Sharpness. 0100
10100 0100 0100 0100
17
Left Right Key Set
Language OSD Trans. OSD Time No Signal
Volume
Touch Switch
USB Upgrade
Reset
Volume, Backlight You can set the Left Right Key Set as shortcut keys for volume or backlight adjustment. After setting, when the menu is not displayed, you can directly press the “<” or “>” key for quick adjustment. English, , Español, Português, Français, Nederlands, Deutsch,, Off, Low, Middle, High Off, 10Sec, 20Sec, 30Sec Blue Screen, Red Screen, Green Screen, Gray Screen, Black Screen, White Screen 0100 On, Off When the touch screen is closed, you need to select the Touch Switch option according to step of the Button Menu Operation, and then press the “<” or “>” key to turn on the touch function. Copy the file to the U disk, insert the Type-C to USB female adapter, and then connect to the Type-C interface of the monitor, press the “>” button to confirm the upgrade. After the upgrade is complete, the monitor will automatically restart. Press “” button to confirm, back to original setting.
18
F1/F2
Safe Frames, Check Field, Focus Assist, Aspect Ratio, Image Flip, Image
Freeze, Histogram, False Colors, Over Exposure, Embedded Audio, Nine Grid,
Zoom, Anamorphic, Waveform, Vector, Center Marker To set the 2 shortcut custom
button F1, F2 on the panel. e.g. Tap the menu ” “, select F1, then tap “” or
“” to pop-up function items to select one of them, such as
“Focus Assist”. So when you exit menu, you could press
F1 directly on the front of panel to turn on “Focus Assist”
function. Same setting for F2
4. Technical Parameters
Panel Size Resolution Dot Pitch Pixel Density Aspect Ratio Brightness
Contrast Viewing Angle
Backlight Adjustable Backlight
5.5″ touch screen 1920 × 1152 pixels 0.0639 (H) × 0.0213 (W) mm 400PPI 16:9 500cd/m2 1000:1 80°/80°(L/R) 80°/80°(U/D) LED Yes
19
Input
HDMI V1.4
Output
HDMI V1.4, 3.5mm stereo headphone jack
Power In Power Out
DC IN 12V, Barrel (5.5mm outer, 2.1mm inner) DC IN 5V (Type-C) Note: please
use 5V/2A or more than 2A Type-C power supply
DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner
HDMI Input/ Output Support Format
Power Input Voltage Power Consumption
D48S0Li/R57o6ri/m48ir0ropr/l5e7s6spcamera) 720p
(60/59.94/50/30/29.97/25/24/23.98) 1080i (60/59.94/50) 1080p
(60/59.94/50/30/29.97/25/24/23.98) 3840×2160p (30/29.97/25/24/23.98)
4096×2160p (24Hz) 724V
9W
Unit Size (mm)
148Lx93Hx20D (mm)
Unit Weight
245g (with F970 install and power kit)
Mount Points Working Temperature Storage Temperature
¼-20 thread points -2050 -3060
5. Trouble Shooting 5.1 Only black and white or monochrome picture:
please check saturation, brightness & contrast adjustment. Please check “Check
Field” is in black, white or monochrome
image or other condition.
5.2 NO Image after put on the power Check if signal cable connecting is in
good condition.
20
Check signal cable connecting, and make sure to use the standard adapter to
connect the monitor. If power is supplied by battery, please check if the
battery is fully charged.
5.3 Earphone No sound Check if Volume control do not open, press the volume
button, and try to increase the volume. If there are still other problems,
please contact with our related technologists. As we are improving product
features and product performance,
so if there is any change on the specification without prior notice.
21