Vesoi 12-LP Table Lamp Idea Instruction Manual

May 21, 2024
Vesoi

12-LP Table Lamp Idea
Instruction Manual

12-LP Table Lamp Idea

with compliments of vesoi-italia.
graze per aver svelte un apparecchio vision! thank you for choose vision luminaire!

errata 12/lp on/off 2016

Vesoi 12 LP Table Lamp Idea
assembly time 1 person executable assembly

VESOI EUROPEAN GUARANTEE

we produce innovative illumination devices and original in the design, and we are always pledged to improve the quality and reliability of his products. for product installation, utilization and miniatous we invite you to read and follow  carefully instructions below. the consumer is granted some rights law 99/44/ce as assimilated in the different national regulations, and this warranty does not derogate from those according to law.
Visio guarantees that the product is lacking any fault of manufacture.
This guarantee is valid exclusively in Europe.
In case of any lack of manufacture you may ask for the guarantee enforcement on the product or on one of its components within two years from the purchasing date.
– the lack of conformity of the product is denounced within two months from its discovery;
– the lack is recognized as such by vision, a retailer or from an authorized assistance center.

Vesoi 12 LP Table Lamp Idea - fig

errata 12/lp on/off
E27 max 60w
compatible con lamped classed E→A+
compatible with lamps class E→A+ – 230V

CAUTION
– If you were in doubt during the installation, contact an electrician and/or vesoisrl.
– disconnect the mains power switch every time you work on the appliance.
– install the luminaire only indoors, in a dry place.
– the device carries no risk of photobiological emissions.
– does not covered with any object: the temperatures that might develop may cause fire.
– the appliance cannot be changed or tampered; any modification can compromise the security. vision declines all responsibility for damages caused by incorrect respect of these instructions.
– for the cleaning of steel / brass
we recommend using a cotton cloth slightly moistened (not wool); are avoid products containing solvents and / or alcohol.
  the symbol indicates that the product must be disposed of separately from urban waste.

  1. connect the base only to properly grounded outlets. verify that the voltage reported on the appliance is the same power supply voltage;
  2. accessories use not recommended for the appliance can cause fires, electric shock and personal injury;
  3. do not place the cable with sharp edges, fix it or let it hang. hold the cable away from heat and water sources.
  4. to avoid possible damage, never place the appliance near or on hot surfaces such as heaters, hobs, gas stoves or similar.
  5. do not use the appliance if the cable or plug is damaged or if the appliance has fallen, is damaged or has malfunctioned. if damaged, the appliance, the cable, and the plug can cause discharges electrical, burns and fires.

assembly instructions

  1. screw to structure B the two leveling feet A;
  2. position the luminaire at the desired point making sure that the power cable with plug-driver reaches an electric socket.
  3. install carefully L light bulb;

F.I. 04/2016 agog. 12/2020
consorziato N. 258 – ECO Contributor RAEE
ECR assort DLG 151 Art. 10.2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals