Vesoi Tratto 50-100-Pl Hanging Lamp Instruction Manual
- June 17, 2024
- Vesoi
Table of Contents
Vesoi Tratto 50-100-Pl Hanging Lamp
Product Information
- Product Name: Vesoi Luminaire
- Model: Tratto 50-100/PL
- Year: 2023
- Power Source: LED
- Voltage: 230V
General Instructions
- Connect the base only to properly grounded outlets. Verify that the voltage reported on the appliance is the same as the power supply voltage.
- Do not place the cable with sharp edges, fix it, or let it hang. Hold the cable away from heat and water sources.
- Do not place the cable with sharp edges, fix it or let it hang. hold the cable away from heat and water sources
- To avoid possible damage, never place the appliance near or on hot surfaces such as heaters, hobs, gas stoves or similar
- DDo not use the appliance if the cable or plug is damaged or if the appliance has fallen, is damaged or has malfunctioned. if damaged, the appliance, the cable, and the plug can cause discharges electrical, burns and fires
Assembly Instructions
- Fix the support A in the direction and at the distance indicated.
- Connect the conductors from the ceiling to the box/terminal C through the supplied sheath H (see fig.1).
- Install structure S on support A (see fig.2).
- Mount the side caps with screws G and fix the stops N (see fig.3).
Specifications
| Model | Power | Voltage | Luminosity | Colour Temperature |
|---|---|---|---|---|
| Tratto 50/PL | 11W | 24V (with built-in driver) | 1400lm | 3000K |
| Tratto 100/PL | 22W | 24V (with built-in driver) | 3000lm | 3000K |
VESOI EUROPEAN GUARANTEE
we produce innovative illumination devices and original designs, and we are always pledged to improve the quality and reliability of our products. for product installation, utilisation and maintenance we invite you to read and follow carefully instructions below. the consumer is granted some rights law 99/44/ce as assimilated in the different national regulations, and this warranty does not derogate from those according to law. Vesoi guarantees that the product lacks any fault of manufacture. This guarantee is valid exclusively in Europe. In case of any lack of manufacture, you may ask for the guarantee enforcement on the product or one of its components within two years of the purchase date.
- the lack of conformity of the product is denounced within two months of its discovery;
- the lack is recognised as such by vesoi, a retailer or from an authorized assistance centre.
tratto 50/pl dim 0 – 10 driver a Bordo
- 11w 24V 14001m 3000K – 230V
- fornito con driver e modulo led-strip driver built-in
- luminaire contains a driver and led-strip
tratto 100/pl dim 0 – 10 driver a Bordo
- 22w 24V 30001m 3000K – 230V
- fornito con driver e modulo led-stripdriver built-in
- luminaire contains the driver and led-str ip
WHAT TO DO IN CASE OF FAULTY ITEM
- contact the vesoi retailer either the closer authorised assistance centre (this information is available at the site www.vesoi.com);
- supply to above said operators a descriptive note of the lack;
- Do not forget to enclose the proof of purchase or the invoice or the fiscal ticket; in lack, we will not be able to allow reparation either by substituting the product in the guarantee;
- shipped or delivered the defective product to the Retailer or Assistance Center, possibly in the original packaging or however using a suitable pack.
Vesoi is reserving the right not to operate the intervention in guarantee in the absence of proof of purchase and case insufficient information is supplied or they are compatible with the product. Vesoi does not guarantee the integrity and/or the functioning of possible appliance bulbs included.