TCL LE Series LED HD TV User Guide

June 3, 2024
TCL

Series LED HD TV
User Guide

LE Series LED HD TV

Figures and illustrations in this User’s Guide are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice.
Important Information
Figures and illustrations in this User’s Guide are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice.
Important Information

CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
 This symbol indicates that this product incorporates double insulation between hazardous main voltage and user-accessible parts. When servicing, use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates “dangerous voltage” This symbol indicates the importance of the product that presents a risk of instructions accompanying the product. an electric shock or personal Injury.
WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the component.
WARNING The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the User’s Guide to ensure your safety.
WARNING The batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
Refer to the identification/rating label located on the back panel of your product for its proper operating voltage.
FCC regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code. Part 1) which provides guidelines for proper grounding and, in particular. specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.
Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft carpeting or a similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in a reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also. make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet.
The mains plug/appliance coupler is used as a disconnect device. the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner that allows you to disconnect the power cord when desired. Product Registration Please register your TCL purchase online at www.tclusa.com.
It will make it easier to contact you should It ever be necessary. Registration is not required for warranty coverage.
Product Information
Keep your sales receipt to obtain warranty pads and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product.
Model No………………………….
Serial No……………………………
Purchase Date……………………
Dealer/Address/Phone ……..
Important Safety Instructions:

Important Safety Instructions

  1. Read and follow all instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  6. Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where it exits from the component.
  7. Do not use this component near water.
  8. Only use the attachments/accessories specified by the manufacturer.
  9. Clean only with dry cloth.
  10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the component. When the TV is placed on a cart, use caution when moving the cart to avoid injury from tip-over.
  11. Warming: To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal.
  12. Unplug this component during lightning storms or when unused for long periods of time.
  13. Refer all servicing to qualified service personnel. Service is required when the component is damaged in any way, such as power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure, abnormal operation, or if the component has been dropped
  14. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See the following example:

TCL LE Series LED HD - FIg

Chapter 1 Connections and Setup

Before Initial Setup
protects Against Power Surges

  • Connect all components before you plug any power cords into the wall outlet or power strip.
  • NEVER plug your TV into an outlet that is controlled by a wall switch.
  • Turn off the TV before you connect or disconnect any cables.
  • Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions.

Safety Information

  • Protect components from overheating.
  • Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.
  • Don’t stack components.
  • If you place the component in a stand, make sure you allow adequate ventilation.
  • If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t harm other components.

Avoid Audio Interference

  • Position cables properly; insert each cable firmly into the designated jack.
  • If you place components above the TV, route all cables down one side of the back of the TV instead of straight down the middle.
  • If your antenna uses 300-ohm twin lead cables, do not coil the cables.
  • Keep twin lead cables away from audio/video cables.
  • Avoid Direct Light Don’t place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting. Check Supplied Parts Check that the following parts were packed with your product.
  • 1 Remote Control and 2 AAA Batteries
  • User’s Guide
  • Quick Start Guide
  • Parts for Table Stand
    Replacing your remote II If you need to replace your remote, visit winttelusa.com. A shipping and handling fee. and the appropriate sales tax. will be charged upon ordering.

Have your Visa or MasterCard ready.
Attaching Your TV to the Table Stand Your

The TV comes without the table stand attached so that you can choose to mount your N either to its table stand or to a wall (wall mount sold separately). If you want to mount your N to the wall, don’t attach the table stand. Follow the Mounting Your N to the Wall instructions.

TCL LE Series LED HD - FIg1

First, remove the N bag and place it on a large, flat surface such as a table or countertop. Remove the N from the carton and place it face down on the N bag. Be sure that the N is face-down to avoid scratching the screen.
Then follow the steps below:

Mounting Your TV to the Wall
If you are mounting your N to the wall, don’t attach the table stand.
To mount your TV to the wall, purchase a VESA wall mount.
Models of 32″ or larger size
Purchase a VESA 200 x 200, M6 screw
The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200×200 refers to the fact that the mounting measurements are 200mm horizontally and 200mm vertically.
Notes: Follow the directions included with the wall mount to mount the TV to the wall.
Caution: Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid causing damage.
Buttons on TV


If you cannot locate your remote, you can use the TV panel buttons on your TV to operate many TV features.
CH+/-: Selects channels stored in the channel list or acts as the up/ down arrow ( ) through the menu items.
VOL+/-: Increases/decreases the volume or acts as the right/left arrow ( ) through the menu items. VOL+ also acts as the OK button when in the menu system.
MENU Brings up the N’s main menu. INPUT Selects the signal source.
**** (POWER button) Turns the Non or to standby mode.

Explanation of Jack on TV

This section describes the jacks on the side/back panel of your N. There are several ways to connect components. COMPONENT IN (CMPT) Lets you connect a component that has component video jacks.
such as a DVD player or set-top box. ( Green jack for Y Blue jack for Pb and Red jack for Pr )

  • Y Pb Pr (Component Video) Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection
  • LJR AUDIO Provides left and right audio connection when using the CMPT VIDEO input. Red and white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources. be sure to use the L AUDIO input.) (Note: AUDIO/VIDEO IN and COMPONENT IN share the same UR AUDIO input jacks.)

AUDIO VIDEO IN (AV) Lets you connect a component that has composite video jacks, such as a VCR. DVD player or set-top box. Yellow jack for VIDEO connection. red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources. be sure to use the L AUDIO INPUT) DVUPC AUDIO IN (used for DVI/PC only) Provides audio connection when using HDMI/DVI INPUT 1 jack for DVI or when using
PC VIDEO IN.
Note:
If using a DVI component. remember to connect the audio cable because the DVI cable carries only the picture signal. not the sound.
VGA (PC VIDEO IN) Connect your computer or another component with a VGA output to this jack using a 15-pin.D-sub cable.
SPDIF OUT DIGITAL AUDIO OUT (coaxial) Use a digital coaxial cable to connect your TV to a compatible audio receiver.
ANT/CABLE/SAT IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, cable box, or satellite receiver.

USB Allows you to connect a compatible mass storage device.
HDMI 1 /DVI IN (High-Definition Multimedia Interface/Digital Visual Interface) Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components.
HDMI 2 IN Lets you connect a component, such as a digital cable box, with an HDMI output for the best picture quality.
(HEADPHONE) Allow you to connect headphones to listen to the sound coming from the TV.
Choose Your Connections
There are several ways to connect components, such as DVD players and set-top boxes, to your TV. Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed HDMI cable is recommended for better compatibility. Input| Signal Gonipatability
---|---
Antenna/Cable| 4801, 480p, 720p, 10801 (NTSC, ATSC, and GAM formats)
Composite Video| 480
Component Video| 4801,480p, 720p/60Hz, 10801/60Hz
HDMI| 4801, 480p, 720p/60Hz, 10801/60Hz, 1080p/60Hz
PC| VGA SVGA XIA

Remote Control Functions

TCL LE Series LED HD - FIg7

INPUT Opens the Input list; then press INPUT repeatedly to select the video input, or press to highlight options, and press OK to select the desired option.
0-9 (Alphanumeric buttons) Enters a channel number, then press OK (or let the entry timeout). (dot) To enter a digital channel with a sub-channel, enter the main channel; then, press the dot (), the sub-channel, and then the OK button.
MENU Brings up the main menu or presses to return to the previous menu.
(arrows) Highlights different items in the TV menu and adjusts the menu controls.
Note: In USB mode, the up or down arrow (SIT) can also be used for rotating a photo when the photo is being displayed.
ZOOM+/- ( ) Selects the desired screen format.
SLEEP+/- ( ) Sets the TV to turn off after a given amount of time. PIC Selects the picture mode. INFO If no menus are currently active, press INFO to display the Channel information. VOL+/- Increases or decreases the TV volume.
MUTE Turns the volume on and off.
FAV Press the FAV button to browse the channels in your favorite list. Use to highlight options, then press OK to select.
MEDIA Goes to the USB menu.
** (POWER button) Turns the TV on or standby.
GUIDE Toggles the Electronic Programme Guide between on and off. Only available for digital channels.
CLEAR Removes any menu or display from the screen and returns to normal viewing.
OK , Displays Channel List menu. When the TV is in the menu system, press to confirm your selection.
GO BACK Returns you to the previously viewed channel.
CH+/- Selects channels and external input mode.
TV Press to access the TV mode.
MTS** Press to select your desired sound mode.
These buttons can be used for playing music.
■ photos in the USB menu.

Obtain the Signal

The first step in connecting your N is obtaining the signal. The back panel of your W allows you to receive analog and/or digital channels by using the ANT/CABLE/SAT IN. Connect the outside aerial or cable network to the ANT/CABLE/SAT IN on the back of the TV set to receive off-air channels or cable channels.

  • If you have a set-top box, you may need to call your cable company or satellite service provider. They may recommend special cables to allow you to view digital channels.

  • The aerial socket (75 OHM – VHF / UHF / cable) can be used for connecting an external aerial or other equipment fitted with a modulator (video recorder, satellite receiver, etc.). We recommend that you do not connect other equipment (video recorder, satellite receiver, etc.) to your TV set to begin with, so as not to complicate the set-up procedure with the additional steps involved. Connect them when you have finished setting up the channels.

  • Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local digital channels available to you. Enter your location, and the program will list local analog and digital stations available using your antenna.

Switching On
Follow the instructions on this page on how to switch on your TV set and use the remote control before going on to the following pages describing how to use the channel scan procedure.

  1. Insert two AAA batteries into the remote control. Precautions on using batteries: – Only use the battery types specified.
    – Make sure you use the correct polarity. – Do not mix new and used batteries.
    – Do not use rechargeable batteries.
    – Do not expose batteries to excessive heat such as sunshine, fire, or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode.
    – Remove the batteries from the remote control if you are not using them for a long period of time.

  2. Connect the power cable to the main socket. (If the power cable is not connected to the television, please first connect the power cable to the television.) Your N set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock.

  3. When powered on, if the TV set is in standby mode, press on the remote control or on the N set to turn on the TV.

Switching Off
To put the TV set into standby mode, press on the remote control or on the TV, and the TV set remains powered up, but with low energy consumption. To switch off the TV set, unplug the mains socket from the mains outlet.

Initial Setup

Initial setup involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter.
The first time you switch the set on, the Initial Setup Wizard opens, which guides you through the initial setup process.

  1. The first step of the setup requires you to select your preferred language for the menu system. Press ♦/♦ to select your language, then press OK/► to enter the next screen.

  2. A menu screen asks you to set the TV Location. • Choosing “Home” for the TV Location assigns the optimal picture settings for most home environments.
    • Choosing “Retail”, which is not ENERGY STAR compliant, sets the unit up with predefined settings for retail displays. In this setting, the power consumption may exceed the requirements of the ENERGY STAR ® qualification. Use ♦/♦ to select the desired location setting (Horne/ Retail); then press OK/► to continue to the next screen. Note: if you select Retail, a screen menu will display to ask you to go back to the previous menu to select Home again, or you can confirm to proceed to the next screen.

  3. Use ♦/♦ to select the current local time zone. Press OKI► to continue to the next screen.

  4. On the Tuner screen, select either Antenna or Cable/Sat. Press OK/► to continue to the next screen.
    Note: If you are using a satellite or cable set-top box, you do not have to complete the Channel Scan.

  5. The Channel Scan screen is now displayed. The default choice is to scan. Press OK/► to begin the channel scan for available channels to be stored in the TV’s memory. Note: If you do not want to scan for channels at this time, you can select Skip Scan or press OK/► to stop the scanning process, and perform the channel scan later in the Setup menu.

  6. The screen will change to show the progress of the process.

  7. When the scanning is finished, the unit has completed the Initial Setup.

  8. Press CLEAR to exit the Wizard and begin watching TV.

TCL LE Series LED HD - FIg9

The following are just illustrations of the menu display.

TCL LE Series LED HD - FIg10

Using Menu System
This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. To access the menu system:

  1. Press MENU to display the main menu.
  2. Press S/ V to highlight an option, then press OK/► to open the corresponding submenu.
  3. In the submenus, use ♦/♦ to select your desired item, then use . /► to set functions or change values or use /► to open the corresponding submenu.
  4. Press OK to confirm your selections.
  5. Press MENU to return to the previous menu or press CLEAR to close the menu.

Picture Menu
The menus for adjusting the picture are used to obtain the best picture settings according to your preference, the type of program you are watching, and the ambient lighting.
To access the Picture Menu, press the MENU button on the remote to open the Main menu. Presse /V to select Picture, then press OK/I■ to display options. (Refer to Figure 1.)
Note: some options may be not available for certain signal sources.
Picture Preset: displays a list that lets you select one of the preset picture settings: Natural, Sports, Personal or ENERGY STAR, Vibrant, Cinematic. Choose the setting that is best for your viewing environment.
Note: ENERGY STAR is the default setting. if you select some other options. the power consumption may change. Brightness: adjusts the brightness of the picture. Contrast: adjusts the difference between the light and dark areas of the picture. Sharpness: adjusts the crispness of the edges in the picture. Expert Settings Backlight: adjusts the backlight level. the menu line is grayed out by default. Only when “Dynamic Backlight” and ‘tight Sensor are both set to -OM the menu line can be adjustable.
Color: adjusts the richness of the color. Tint: This option adjusts the balance between the red and green levels. Color Temperature: adjusts the color temperature from cool to warm.
Note: Color and Tint are not available in PC mode.
Advanced Settings Light Sensor: when activated, this feature monitors the ambient light conditions in the room and adjusts the TV’s backlight for optimum viewing. It also serves as an energy-saving feature by lowering the backlight power level when appropriate (typically in darker conditions).
Dynamic Backlight: this option automatically adjusts the brightness of the backlight according to the content of the incoming signal. Dynamic Backlight optimizes the picture quality and decreases power consumption.
Note: when Light Sensor or Dynamic Backlight is set to Off the power consumption may exceed the requirements of the ENERGY STAR® qualification.
Noise Reduction: This setting reduces picture ‘static’ or any type of interference. This feature is especially useful for providing a dearer picture in weak analog signal conditions Choose between these
options: Low for a softer, smoother picture that retains picture sharpness and detail. The middle for a slightly softer picture than the Low setting. High for an even softer, smoother picture than the other settings (the picture detail is somewhat decreased). SABC (Scene Adaptive Brightness
Control: Option: On/Ott. If set to On mode, the distribution of brightness in every scene is picked out automatically, TV always adjusts appropriate brightness by full automation. PC Settings: this option allows you to adjust the PC settings when in PC mode. Reset
Picture Settings: This function allows you to reset all the picture settings to the factory default settings.
Sound Menu
The Sound Menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote, and then use ♦/♦ to highlight Sound from the Main Menu. Press /► to select. The following options will be displayed: (Refer to Figure 2.)
Equalizer: the five-band equalizer allows you to adjust the audio frequency settings. You can select one of the five preset options or create a custom preset.
Equalizer: allows you to choose a specific sound preset: Standard, Music, Voice, Movie, and Personal.
Frequency Range: displays the different graphic equalizer names set for each sound preset option. Choose a band and make adjustments. When making adjustments, the Equalizer option automatically changes to Personal. Press /► to select the desired frequency (100Hz, 300Hz, 1 kHz, 3KHz, 10KHz) you wish to adjust. Use ♦/♦ to adjust the level. When you have finished adjusting the levels, press MENU to exit.
Balance: adjust the amount of audio sent to the left and right speakers.
Surround option On/011. When turned on, this option enables a mode that simulates a surround sound effect.
Speaker: option On/Off. When you select the Ott option, the sound speaker on the TV will be turned off. SPDIF Type: This option controls the type of audio stream sent to the Digital Audio Output jack. Available options are Dolby Digital, PCM, or Off. Auto Volume Control: option On/Off. This option reduces the annoying blasts in volume that often occur during commercial breaks, and also amplifies softer sounds in the program material, eliminating the need for constant volume adjustment.
Analog TV Sound: This option controls the manner in which the sound comes through your speakers. Options available vary according to the input selected.
Note: The Analog TV Sound option is only available for analog channels.
Mono (available for regular TV viewing only): this option plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals.
Stereo: this option splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio. The word “Stereo” appears in the Channel Banner when you tune to a program that is broadcast in stereo.
Second Audio Program (SAP): this option plays the program’s audio in a second language, if available. The letters “SAP” appear in the Channel anner when you tune to a program that is broadcast SAP information. SAP audio is broadcast in mono only. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired. Default Audio Language: choose the language you prefer for dialog on digital channels. If the preferred
language is not broadcasted with the program, then the TV plays the default audio for the program (usually English in the US). There are 3 available default languages (English, French, and Spanish).
Note: The Default Audio Language option is only available for digital channels.
Current Audio Language: press /► to choose from the list of languages available for the program you’re watching. The language chosen becomes your preferred language for all digital channels until you turn the TV off. If the language chosen is not being broadcasted with a program, the TV plays the default language for the program (usually English in the US).
Note: The Current Audio Language option is only available for digital channels. Setup Menu The Setup Menu allows you to configure the TV with your preferences. Press MENU on the remote to open the Main Menu. Press A /V to select Setup: then press /► to display the following options: (Refer to Figure 3.)
Signal Type: choose the type of signal (Cable/Sat or Antenna) you have connected to the ANTI CABLE/SAT IN. Channel Scan When you perform a Channel Scan, your TV searches for channels with signals and stores the channel information in the Channel List. Then, as you watch TV and press CH+ or CH-. your TV goes to the next or previous channel in the Channel List and skips the channels that do not have signals. If the TV signal source changes — for example, if you change from an outdoor antenna to cable TV — you will need to rescan for channels. To automatically scan for channels:

  1. After choosing a signal type, press ♦/♦ to highlight Channel Scan.
  2. Press /► to start the scan. You can see the search progress and how many channels are found in the on-screen menu. (Note: If you wish to stop the search, press the CLEAR button.)
  3. After the scan is complete, press the MENU button to return to the previous menu, or press the CLEAR button to close the menu.

Channel Skip
You can hide channels in the Channel List. Then, when you press the CH+ or CH- button. the TV will skip the hidden channels. You can still tune in to these hidden channels by pressing the number of the channel on the numeric keypad. To hide specific channels:

  1. Select Setup > Channel Skip, and press /► to open the Channel Skip screen.
  2. Press ♦/♦ to highlight the channel you wish to skip; then press OK to check the highlighted channel. You can add the channel back into the Channel List by highlighting it and unchecking it.
  3. Repeat the process to hide additional channels.
  4. Press MENU to return to the previous menu or press CLEAR to close the menu.

Channel Edit
The Channel Edit function allows you to add or change a channel label, only for analog channels. You cannot change the name on digital channels.
To edit an analog channel name:

  1. Select Setup > Channel Edit, and press /► to open to enter the next screen.
  2. Press ♦/♦ to highlight the channel you wish to label or edit.
  3. Press OK to enter the Channel Edit screen.
  4. The Channel Name will be highlighted, press OK to start editing.
  5. Use 1/► to select the input field, then use ♦/♦ to enter the name for the channel.
  6. Press OK to confirm and save the new label.
  7. Press MENU to return to the previous menu or press CLEAR to close the menu.

Input Skip
You can hide video inputs in the Channel List. This option allows you to remove the inputs from the Channel List so you do not encounter them when channeling up or down. Once you have hidden inputs, the TV will skip these inputs when you press the CH+ or CH- button.
To hide video inputs:

  1. Select Setup > Input Skip, and press /► to display the Input Skip screen.
  2. Press ♦/♦ to highlight the video input you want to hide.
  3. Press OK to check the highlighted input. You can add an input by highlighting it and unchecking it.
  4. Repeat the process to hide additional video inputs.
  5. Press MENU to return to the previous menu or press CLEAR to close the menu.

Input Labels
You can add a label to a video input source to make it easier to identify.

  1. Select Setup > Input Labels, and press OM” to display the Input Labels screen.
  2. Press ♦/♦ to highlight the input source you wish to label.
  3. Press /► to select the label for this source.
  4. Press MENU to return to the previous menu or press CLEAR to close the menu.

Closed Caption
Many programs are encoded with closed captioning information, which allows you to display the audio portion of a program as text on the TV screen.
Note: Closed caption settings are not available for HDM1. CMPT or PC inputs. These settings must be set in the connected component’s menu. Closed captioning is not available on all channels at all times. Only specific programs are encoded with closed captioning information. When a digital program is closed captioned. CC is displayed in the channel banner. The Closed Caption options are: (Refer to Figure 4.)
CC Setting: this option allows you to choose the way closed captioning information appears on the screen.
OFF – No captioning information displayed.
On Always- Chooses this option if you want captioning information to be shown whenever available.
On When Mute – This option allows the closed captioning to display (when available) whenever the TV’s sound is muted. The captioning information is not displayed when the sound is not muted.
Analog CC Type: this option lets you select the captioning mode used for displaying caption information, when available. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area.
Digital CC Type: if available, this allows you to select a closed caption service mode (1-6) for digital channels.
Digital CC Preset: if available, this allows you to select between Off and On options. On mode allows you to set the options below.
Digital CC Style: This option lets you customize the following display options. if available: Caption Style – Select either As Broadcaster or Custom options. If you choose Custom options, the setting changes according to the options you choose
Digital CC Size – Set the size of the digital closed caption text.
Digital CC Font -Select a character design for the digital closed caption text. A font is a complete assortment of letters and numbers. punctuation marks, etc. in a given design. You can choose from a variety of fonts. Digital CC Background Color lets you set the color of the area behind the digital closed caption text.
Digital CC Background Opacity – Set the appearance of the area behind the digital closed caption text.
Digital CC Color – Sets the color of the digital closed caption text.
Digital CC Opacity – Sets the appearance of the digital closed caption text.
Time Setup
Time Zone, You can set the correct Time Zone for your area. To choose a time zone:

  1. Select Setup > Time Setup > Time Zone. (Refer to Figure 5.) press /► to proceed to the next screen.
  2. Press /► to select the time zone for your area.
  3. Press the MENU button to return to the previous menu or press CLEAR to close the menu.

Time
To set the time:

  1. Select Setup > Time Setup > Time, and press /► to proceed to the next screen.
  2. Options on this screen include: Auto Synchronization Press 4► to choose On to acquire the time automatically from digital channels.
    Daylight Saving – Select Auto to set the daylight saving time for your area automatically.
    Date – When the Date is highlighted, use /► to set the date, and press OK to confirm. (Note: Use the same way to set the time below)
    Time – This lets you set the time manually. Power On Timer • Select Once/Dally/Off. Power On Time  Allows you to set the time you want the TV to turn itself on. Power Off Timer- Select Select Once/Daily/Off. Power Off Time – This allows you to set the time you want the TV to turn itself off. Sleep
    Timer: Press /► to set the TV to turn off after a given amount of time.

System Information
This option allows you to see the system information including Panel ID, SW Version, and Service Model No.
Reset All
This option resets all settings (except parental control settings) to the factory defaults. When you select this option, a confirmation box opens

  1. Press /► to select OK or Cancel.
  2. Press OK to confirm.

Parental Control Menu
The choices in the US V-Chip and Canada V-Chip menus involve software inside your TV, referred to as V-Chip, which allows you to block TV programs and movies. TV programs can be blocked by age-based ratings, such as TV-MA. If available, TV programs can also be blocked by content, such as adult language (L). Movies can only be blocked by age-based ratings. Once you block programs, you can unblock them by entering a password. By default, the software inside your TV is turned off or unlocked.
V-Chip reads the program’s age-based rating (TV-MA, TV-14, etc.) and content themes (Violence (V). Adult Language (L), etc.). If you have blocked the rating and/or content themes that the program contains, you receive a message that the channel is currently blocked. Change the channel or enter your password and temporarily deactivate the parental controls.
Broadcasters are not required to provide content themes, so programs received with no content themes are blocked only if you block their age-based rating. You can also block programs that have been given an Exempt rating, and programs that are considered unrated.
Change V-Chip Password
The first time you enter the Parental Control menu, you must set a password in order to adjust other parental control settings. To enter a V-Chip Password, follow these steps:

  1. Select Parental Control > Change Password. (Refer to Figure 6.) Press /► to enter the Change Password screen.
  2. Use the number buttons to enter the four-digit number for your password.
  3. Re-enter the same code to confirm the password.
    Note: The password must be entered before the TV will continue with Parental settings next time. The super password is 2458. If you forget your password. enter it to override any existing password.

Channel Block
To block a specific channel, follow these steps:

  1. Select Parental Control > Channel Block, and press /► to enter the next screen with the channel list on.
  2. Press ♦/♦ to select the channel you wish to block.
  3. Press OK to place a checkmark in the box to block that channel. When you tune in to that channel, you will need to enter a password to view the channel programming.

Button Block
This option allows you to block (disable) or unblock (enable) the TV panel buttons. The remote control still tunes to any channel. If you are using this to keep children from changing channels, be sure to remove access to any remote that is capable of operating the TV while you have the TV panel button blocked. To block the TV panel buttons, select Parental Control > Button Block, and press /► to choose the On option. To enable these buttons again, return to this menu and choose the Ott option.
V-Chip Press
MD- to display its submenus: (Refer to Figure 7.)
V-Chip Rating Enable Select Parental Control > V-Chip > Rating Enable. then press /► to turn this option on or off. You must remember to set Rating Enable to On mode to have the following V-Chip rating limits take effect.
US V-Chip TV Ratings
You can automatically block all program ratings above a specified age-based rating level.

  1. Select Parental Control > V-Chip > US V-Chip > US TV Ratings. Press /► to enter the US TV Rating screen. In the US TV rating panel, you can customize the program blocking of the following TV ratings:
    TV—Y All children
    TV—Y7 Children 7 years and older
    TV—G General audience
    TV-PG Parental guidance suggested
    TV-14 Parents strongly cautioned
    TV-MA Mature audience only
    You can also customize the TV ratings for the following content:
    D Sexual explicit dialog
    L Adult language
    S Sexual situations
    V Violence
    FV Fantasy violence

  2. Press to navigate through the TV rating options Press OK to block (locked) or allow (unlocked).

US V-Chip Movie Ratings
You can automatically block all program ratings above a specified age-based rating level.

  1.  Select Parental Control > V-Chip > US V-Chip > US Movie Ratings. Press OK/► to enter the US Movie Rating screen. In the US Movie Rating panel you can customize the program blocking of the following Movie ratings:
    G General audience
    PG Parental guidance suggested
    PG -13 Unsuitable for children under 13
    R Restricted, under 17 requires a companying parent or adult guardian
    NC-17 No one under 17 admitted
    X Mature audience only

Canada English or French V-Chip Ratings
If you receive Canadian programs, you can block Canadian English and French V-Chip by ratings only. When you block a particular rating, you automatically block the higher-rated programs as well. To block Canadian English and French program ratings, follow these steps:

  1.  Select Parental Control > V-Chip > Canada V-Chip. Press /► to enter the next screen.

  2. Press Si V to select Canadian English Ratings or Canadian French Ratings. Press /► to proceed. Canadian English Ratings:
    C Children
    C8+ Children 8 and older
    G General audience
    PG Parental guidance
    14+ Viewer 14 and over
    18+ Adult Canadian French Ratings:
    G General audience
    8 ans+ Viewer 8 and older
    13 ans+ Viewer 13 and older
    16 ans+ Viewer 16 and older
    18 ans+ Adult

  3. Press / to select the desired rating. Press OK to toggle between View and Block.

Open V-Chip: This allows you to select the downloadable rating level. In the event that a new rating system is provided by the broadcaster, the new rating options would appear within this menu.
Blocking Unrated/Exempt Programs
The Unrated/Exempt Rating option lets you decide if programs that the V-Chip recognizes as unrated or exempt can be viewed. Unrated N programs may include news, sports, political, religious, local, and weather programs, emergency bulletins, public announcements, and programs without ratings. The Exempt option applies to both US and Canadian unrated programs and Canadian programs rated E.

  1. Select Parental Control > V-Chip > UnRated/ Exempt Ratings.
  2. Press /► to toggle between View and Block. View All unrated programs are available. Block All unrated programs are not available.

Reset Downloadable Data

  1. Select Parental Control > V-Chip > Reset Downloadable Data. press OK/► to reset the downloadable V-Chip data.
  2. A confirmation box opens. Press /► to select.
  3. Press OK to reset the downloadable rating data, if present.

Input Block

  1. Select Parental Control > Input Block, and press /► to display the Input source list screen.
  2. Press ♦/♦ to place a checkmark in the box to block the input. When you tune in to that input, you will need to enter a password to view the channel.
  3. Press OK to confirm your selection. A locked/ unlocked icon appears next to the selected input.

Language Menu
To select the preferred language for all menus, follow the steps below. You can choose between English, Espanol. or Francais.

  1. Select Language, and press OK/► to display the Language Saeen. (Refer to Figure 8.)
  2. Press / to select the preferred language for the menu.
  3. Press /► to select On or Off.
  4. Press the MENU or CLEAR button to exit the menu.

USB Menu
You can connect a device with a USB to your Nor use a USB flash drive, which only supports the FAT format and unpartitioned USB devices. This connection allows you to insert a USB flash drive directly or connect a compatible mass storage device with a USB, such as a digital camera, a multi-format card reader, or an MP3 player. If you have a USB drive, plug it into the drive directly. If you have a device with a USB port, connect one end of the USB cable to the USB port and the other end to the USB jack on the side of the TV.
The USB feature on your N allows you to play audio files (format supported: MP3) or display pictures (format supported: JPEG). To utilize this feature, follow these steps:

  1. Press MENU on the remote control (the Main Menu appears).

  2. Use S/V to select USB.

  3. Press /► to proceed to the USB Screen. Or. you can press the MEDIA button on the remote control to display the USB screen directly; you can also press the INPUT button to display the input list and select USB. (Note: if no USB device is inserted. No Media” displays on the screen. only support the FAT format and unpartitioned USB devices) Media Brower: Select
    Media Brower. Press OK to enter, then press / to select a file or file folder, press OK, and use the following menus:
    Open – Select to display the folder/file list in the USB device.
    Thumbnai l – Select to display the thumbnail of the folders/files, only available for photo folders! files.
    Slideshow – Select to start the photo slideshow. The menu line is grayed out if there is no photo file in the root of the current USB device.
    Play Musi c – Select to playback the music. The menu line is grayed out if there is no music file in the root of the current U disk.
    Return – Select to return to the previous menu.
    Media Settings: select Media Settings. Press OK to enter, then use the following menus:
    Photo Settings – Select to display Photo Settings submenu.
    Slideshow interval – Select the Slideshow interval: 5 Seconds, 10 Seconds, 20 Seconds.
    Slideshow Effect – Select the Slideshow Effect.
    Slideshow Repeat – Select the options: Off/On.
    Thumbnail Size – Select to display the thumbnail size: 5X3 and 3X2. Music Settings: select to display the Music Settings submenu. Music
    Play Mode – Select the options: Once, Play All, Random. Music Play Repeat – Select the options: Off/On. Music Auto Play – Select the options: Off/On.

  4. Press MENU to go back to the previous menu. or press CLEAR to exit.

Frequently Asked Questions (FA0s)

What’s the quickest way to view High Definition (HD) video?****

– Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. Visit www.antennae.nrg for assistance in deciding what type of antenna to use to receive the local digital channels available to you. By entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna.

Are there other ways to view High Definition (HD) videos?****

– Besides using an off-air antenna as mentioned above, you can also use a set- top box to receive digital video. Contact your cable company or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels the best way.

How do I tell an analog channel from a digital channel?****

– Press the INFO button to display the Channel Banner. Look at the bottom right comer of the screen. The dot is displayed for a digital channel. If there is no dot, it is an analog channel.

Why are there bars on my screen and can I get rid of them?****

– Most digital video is sent in a 16/9 format which fills your screen but is sometimes sent in 4/3 which does not fill your screen. It depends on how the station or device connected to your TV is formatting the video. – If there are bars on the screen, press the ZOOM 4+ button to try a different format that may eliminate the bars. Some bars can’t be removed because of the way the format is sent by the broadcaster. The format changes as you press the ZOOM -/+ button and the format type is displayed at the bottom of the screen.

Why does channel search find a lot of channels, but when I try to tune to them, there’s nothing there?****

– Some channels enabled by the cable company don’t carry programming, such as video on demand. When channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these channels from your Channel List. Remove these in the Channel Skip Menu.

Why does the first channel search take a long time?****

– If you have both analog and digital channels, the TV is looking for all available channels in the Channel List. If you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel.

Troubleshooting

Most problems you encounter with your N can be corrected by consulting the following troubleshooting list.
TV Problems
The TV won’t turn on.

  • Make sure the N is plugged in.
  • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in another device.
  • The N panel controls may be locked (disabled). Use the remote control to unlock the N panel controls.
  • Select the Button Block feature on the Parental Control menu and press OK to uncheck the box.

There Is no picture and no sound but the TV Is on.

  • You may be tuned to input with no component connected to it. If you’re trying to view a connected component, press INPUT until the picture from that component appears.
  • The Signal Type option may be set incorrectly.
  • The channel may be blank. Try changing channels.
  • If you’re watching your VCR and it’s connected with coaxial cable to the ANT/CABLE/SAT IN jack, tune the N to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also, make sure the NNCR button on the VCR is in the correct mode (press the NNCR button on your VCR).

The sound is fine, but the picture is poor quality.

  • If you’re getting a black-and-white picture from a component you’ve connected to your TV, you might have your video cables connected to the wrong jacks. A yellow video cable connects to the yellow VIDEO INPUT jack on the side or back of your TV; three video cables or bundled component video cables (red, blue, and green) connect to the corresponding COMPONENT INPUT jacks on the back of your N
  • Check the antenna connections. Make sure all of the cables are firmly connected to the jacks.

There is no sound, but the picture is fine.

  • The sound might be muted. Try pressing the volume up button to restore sound
  • If using DVI or Y, PB, PR, remember to also connect the device’s left and right audio output jacks to the N’s L and R AUDIO INPUT jacks.
  • The sound settings may not be set correctly.
  • If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection into the L AUDIO INPUT jack on the N.

The screen Is blank.

  • Check your connections. If you used yellow, red, and white cables to connect, make sure they’re connected to the red, white, and yellow AUDIONIDEO INPUT jacks on the side or back of the N.
  • If you’re trying to watch something that’s playing on a component connected to the N (like a DVD), press INPUT until you get to the correct video input channel.
  • Make sure the component connected to the N is fumed on.
  • Try another channel.

The buttons on the TV panel don’t work.

  • The N panel controls may be locked (disabled). Use the remote control to unlock the N panel controls by selecting the Button Block feature in the Parental Control Menu and pressing /► to uncheck the box.
  • Unplug the N for 10 minutes and then plug it back in. Turn the Non and try again.

The TV turns off unexpectedly.

  • The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds, and then turn the Non again. If this happens frequently, the voltage in your house may be abnormally high or low.
  • Unplug. Wait 10 minutes. Plug in again.

You can’t select a certain channel.

  • The channel may be blocked or not approved in the Parental Control Menu.
  • If using a VCR, check to make sure the TVNCR button on the VCR is in the correct mode (press the TV/ VCR button on your VCR).
  • Press the TV button and then try to change the channels.

The stereo reception Is noisy.

  • It may be a weak station. Use the Sound Menu and Analog N Sound to choose mono.

A black box appears on the screen.

  • Closed captioning might be on. Check Closed Caption in the Setup menu.

You are having problems with the HDMI Connection.

  • Make sure the HDMI or DVI component is turned on and the cables are firmly connected. If problems still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord and plugging it back in.
  • If you are tuned to HDMI 1, or other HDMI INPUT and you’re receiving an Unusable Signal message screen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner, the HDMI or DVI device isn’t responding. Contact the manufacturer of the HDMI or DVI device for further assistance.
  • If you tune to the HDMI 1, or other HDMI INPUT and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI component is having trouble sending video information to the N. Reconnect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks if they are available, or contact the manufacturer of the HDMI or DVI component for further assistance.
  • If you have black bars on each side of your picture, the component you connected might have a switch or a menu option allowing you to change the picture quality output which will fix this. Choose either 720p or 1080i.

The remote control doesn’t work.

  • Something might be between the remote and the remote light sensor on the front of the N. Make sure there is a clear path.
  • The remote may not be aimed directly at the N.
  • The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote.

The Universal Remote control doesn’t work.
This N utilizes new remote control signals and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, generic universal remotes, etc.). Over time, newer universal remotes will become available that should pick up the new N codes.
You are experiencing problems with V-Chip/Parental Controls.
If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select Parental Control > V-Chip > Rating Enable. Rating Enable is highlighted. Press /► to select On to have the rating limits take effect.
What else can I do?
If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your N. Note that after a reboot, you may need to run your N through the setup process again. To do a reboot, unplug the power cord from the wall outlet or power strip. Keep your N unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then please visit www.tclusa.com for updated FAQs or contact TCL Customer Support at the support number provided in your Warranty under “How To Get Service.”

Care and Cleaning

Caution: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation.
IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV. The N’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning, do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of fire, shock hazard or damage to the TV.

Television Specifications

Broadcasting system
Receiving Channels
Tuner type
Screen refresh rate
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity| US System NTSC-M
ATSC standard (8VSB), QAM
VHF2-13
UHF14-69
CATV
14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Frequency synthesized
60Hz
5ºC to 35t (41°F to 95°F)
20% to 80%,non-condensing
-15t to 45t (5°F to 113°F)
10% to 90%,non-condensing
---|---

TTE Technology, Inc. (“TTE”) Limited Warranty

All LCD/LED Models
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND AS DESCRIBED BELOW TTE EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES).
What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased from an Authorized Dealer of TCL brand products and packaged with this warranty statement.
New LCD/LED Televisions
For how long after your purchase:

  • Two (2) years from the date of purchase for parts.
  • Two (2) years from the date of purchase for labor.

What we will do:

  • At TTE’s discretion, pay an Authorized TCL Service Center for both labor charges and parts to repair your television or replace your television with a new or refurbished/remanufactured unit. See “How to get service”.

How to get service:

  • Call 1477-300-8837. Please have your unit’s date of purchase, place of purchase, and model/ serial number ready. The model/serial number information can be found on the back of your unit.
  • A representative will troubleshoot your problem over the phone. If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based on the TTE Limited Warranty statement.
  • At the sole discretion of TTE, television screen sizes 32″ and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/remanufactured unit. At the sole discretion of TTE, television screen sizes 33″ through 55″ will either be repaired at an Authorized TCL Service Center or repaired in-home. If repaired at an Authorized TCL Service Center, TIE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will provide instructions for packaging and shipping the unit. Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service.

What your warranty does not cover:

  • Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer.)
  • Installation and related adjustments.
  • Damage resulting from non-approved installation methods.
  • Signal reception problems are not caused by your unit.
  • Damage from misuse or neglect.
  • Batteries.
  • A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes (including but not limited to rental purposes).
  • A unit purchased or serviced outside the USA.
  • A unit sold as is or with all faults

Product Registration:
Please register your TCL purchase online at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage.
Limitation of Warranty:

  • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION WAS GIVEN BY TTE TECHNOLOGY. INC. ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTEE OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY.
  • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. LTE TECHNOLOGY. INC. SHALL NOT BE LIABLE FOR SPECIAL. INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE.

How State Law relates to this warranty:

  • Some states do not allow the exclusion nor limitation of incidental or consequential damages or limitations on how long an implied warranty lasts. so the above limitations or exclusions may not apply to you.
  • This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information.
Service calls that do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser.
This product incorporates HDMI technology. HDMI, the HDMI logo, and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA).
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy-efficient products and practices.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are registered trademarks of Dolby Laboratories.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Please do not send any products to the California address listed in this manual or on the carton. This will only add delays in service for your product.
Figures and illustrations in this User’s Guide are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice.

TTE
TTE Technology, Inc.
555 S. Promenade Ave., Suite 103, Corona, CA 92879
TCL and associated marks are trademarks of TCL S.A.used under license to TTE Corporation.
Part No.: 72-E30008-XNA1 B

Documents / Resources

| TCL LE Series LED HD TV [pdf] User Guide
LE32HDE3000 LE39FHDE3000 LE40FHDE3000, LE32HDE3000, LE39FHDE3000, LE40FHDE3000, LED HD TV, LED TV, HD TV, TV, LE Series LED HD TV
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals