Syvecs Volkswagen Golf R32 Plug and Play ECU Kit Owner’s Manual
- June 1, 2024
- Syvecs
Table of Contents
Syvecs Volkswagen Golf R32 Plug and Play ECU Kit
Contents
This Kit is Designed for Vw R32 and Audi 32 using the VR6 Engine
The kit come with the following:
1 x Syvecs S7Plus or S7-I
1 x Wiring Adaptor
Installation
-
Remove the Negative Terminal from the battery on the Vehicle
-
Remove the OEM Engine control modules found in the engine bay under the Window Panel
-
Replace with the Syvecs kit
-
Wire in Map Sensor and connect to the following pins:
C3 – Map Sensor Ground
C6 – Map Sensor 5v
C19 – Map Sensor Signal
Specific Software Options
Car Coding Setup
I/O Configuration ‐ Pin Assignments – Car Code 1
DSG = 0
Manual = 1
IMPORTANT:
The Mk4/Mk5 come with two different types of Lambda sensor. Some use the
LSU4.2 and others use the LSU4.9.
We suggest to always check which sensor you have fitted and to externally
check the reading is correct to ensure the correct linearization is used in
scal.
Injector Size is set in Fuel Consumption – Injector Consumption Scaling for
MPG Gauge Injector Size / 60 = ml/s value OEM Injectors is 5.5
FAQ and Help
Q) Do you control the OEM Intake Flap
A) Yes, This is set in Output Functions – Engine Speed Controlled Output As default in the strategy, Valve is turned on at 1500rpm and then off at 4000rpm
Q) What of the original features will no longer work?
A) All original features will function properly Cruise Control switch is present on Slave AN28
Q) Can you change Calibration Switch Position from inside the car
A) If the car comes with Cruise Control then the Cal up and Cal Down can be assigned to Slave AN26,
Q) Can we use the OBD port still to Log, Read Codes and Clear them on other ecus on the car like ABS?
A) Yes via the Use on VagCom – https://www.ross-tech.com/vag-com/
Email [email protected] for a base map to suit your setup
A| DESCRIPTION| CONNECTOR A|
---|---|---|---
| PART NUMBER| 4-1437290-0|
NOTES:| 34 Way – Key1|
Sieve’s Description| Sieve’s Pinout| Function|
R32 Golf
---|---|---|---
PWR CTR OUT| A1| MAIN RELAY OUTPUT| Main Relay
H-Bridge1 / SlaveOut1| A2| H-Bridge1| DBW
H-Bridge2 / SlaveOut2| A3| H-Bridge2| DBW
H-Bridge3 / SlaveOut3| A4| H-Bridge3|
H-Bridge4 / SlaveOut4| A5| H-Bridge4|
H-Bridge5 / SlaveOut5| A6| H-Bridge5|
H-Bridge6 / SlaveOut6| A7| H-Bridge6|
H-Bridge7 / SlaveOut7| A8| H-Bridge7|
H-Bridge8 / SlaveOut8| A9| H-Bridge8|
FUEL1| A10| INJECTOR or PWM OUTPUT| Primary Injector 1
FUEL2| A11| INJECTOR or PWM OUTPUT| Primary Injector 2
FUEL3| A12| INJECTOR or PWM OUTPUT| Primary Injector 3
FUEL4| A13| INJECTOR or PWM OUTPUT| Primary Injector 4
FUEL5| A14| INJECTOR or PWM OUTPUT| Primary Injector 5
FUEL6| A15| INJECTOR or PWM OUTPUT| Primary Injector 6
FUEL7| A16| INJECTOR or PWM OUTPUT|
FUEL8| A17| INJECTOR or PWM OUTPUT|
PWM1 /FUEL9| A18| PWM OUTPUT| Fuel Pump
PWM2 / FUEL10| A19| PWM OUTPUT| FAN
PWM3 / FUEL11| A20| PWM OUTPUT| Boost Solenoid
PWM4 / FUEL12| A21| PWM OUTPUT| Intake Flap
PWM5| A22| PWM OUTPUT|
PWM6| A23| PWM OUTPUT|
PWM7| A24| PWM OUTPUT| VVT In
PWM8| A25| PWM OUTPUT| VVT Ex
IGN1| A26| CYL 1 IGNITION OUTPUT| CYL 1 IGNITION OUTPUT
IGN2| A27| CYL 2 IGNITION OUTPUT| CYL 2 IGNITION OUTPUT
IGN3| A28| CYL 3 IGNITION OUTPUT| CYL 3 IGNITION OUTPUT
IGN4| A29| CYL 4 IGNITION OUTPUT| CYL 4 IGNITION OUTPUT
IGN5| A30| CYL 5 IGNITION OUTPUT| CYL 5 IGNITION OUTPUT
IGN6| A31| CYL 6 IGNITION OUTPUT| CYL 6 IGNITION OUTPUT
PWRGND| A32| POWER GROUND| PwrGnd
PWRGND| A33| POWER GROUND| PwrGnd
PWRGND| A34| POWER GROUND|
B| DESCRIPTION| CONNECTOR B|
---|---|---|---
| PART NUMBER| 3-1437290-7|
NOTES:| 26 Way – Key1|
PWRGND| B1| POWER GROUND|
CAN2L| B2| |
CAN2H| B3| |
KNOCK| B4| KNOCK|
KNOCK 2| B5| KNOCK 2|
PVBAT| B6| CONSTANT 12V|
IVBAT| B7| 12v|
LAM1A| B8| Lamv / LamD1+/ LamLun1| LSU4.9 – PIN6
LAM1B| B9| Lami / LamD1- /LamIP1| LSU4.9 – PIN1
LAM1C| B10| LamLIA1|
LAM1D| B11| LamGND / LamLVM1| LSU4.9 – PIN2
LAM1HEATER| B12| LAMBDA HEATER| LSU4.9 – PIN3
IVBAT| B13| 12V|
LAM2A| B14| Lamv / LamD1+/ LamLun1|
LAM2B| B15| Lami / LamD1- /LamIP1|
LAM2C| B16| LamLIA1|
LAM2D| B17| LamGND / LamLVM1|
LAM2HEATER| B18| LAMBDA HEATER|
IVBAT| B19| 12V|
KLINE| B20| RS232RX|
RS232RX| B21| RS232RX|
RS232TX| B22| RS232TX|
LANRX-| B23| Cat5 Pin2|
LANRX+| B24| Cat5 Pin1|
LANTX-| B25| Cat5 Pin6|
LANTX+| B26| Cat5 Pin3|
