D-Link 10 Gigabit Ethernet Connection User Guide
- June 7, 2024
- D-Link
Table of Contents
DXS-1210 Series
10 Gigabit Ethernet Smart Managed Switches
Highlights
10 Gigabit Ethernet Connection
10 Gigabit Ethernet ensures that high-bandwidth demands can be fulfilled
easily and allows for device flexibility across your network
Save Energy, Save Money
D-Link Green technology conserves energy by powering down unused ports, saving
you money while reducing your carbon footprint
Layer 3 Lite Functions
Wired speed inter-VLAN routing helps by reducing the pressure of routers and
backbone networks, improving the overall network efficiency
Features
Green Technology
- Power saving via the following features:
- Link Status detection
- LED Shut-Off
- Port Shut-Off
- System Hibernation
Security Features
- Access Control List
- IP-MAC-Port Binding
- Clientless MAC/Web access control
- D-Link Safeguard Engine
- Port Security
- ARP Spoofing Prevention
Intuitive Management
- D-Link Network Assistant Utility or Web-based GUI
- Built-in SNMP MIB for remote NMS (D-View 7)
- Full CLI through console and Telnet
Advanced Features
- Auto Surveillance VLAN
- Auto Voice VLAN
- Loopback Detection
- Cable Diagnostics
- Static Route
- LLDP/LLDP-MED
The D-Link DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switches are a cost-effective 10 Gigabit switch series capable of servicing a range of network needs in any business. Supporting 10GBASE-T/SFP+ combo ports, this series provides connection flexibility across a network allowing easier network integration. With high performance and low latency, the DXS-1210 Series fulfills the needs for virtualization, cloud services, and server-to- server applications, making it perfect for Small-to-Medium-Business (SMB) customers.
Energy Efficient
By incorporating D-Link Green technology, this series of switches is capable
of saving power without sacrificing operational performance or functionality.
The switches feature built-in smart fans with internal heat sensors that
monitor and detect temperature changes and react accordingly by utilizing
different fan speeds for different temperatures.
At lower temperatures, the fans will run slower, reducing the switch’s power
consumption and noise. Link tatus drastically reduce power consumption by
automatically putting ports without a link into asleep mode. The DXS-1210
Series takes the approach to green IT one step further by incorporating a
special chipset with advanced
silicon technology for efficient use of energy.
Extensive Management and Layer 2 Features
The DXS-1210 Series comes with a complete lineup of L2 features, includes port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). network maintenance features include loopback detection and cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting and shutting down difficult-to-diagnose switching loops. The cable diagnostic feature, designed primarily for administrators and customer service representatives, determines the cable quality and quickly discovers errors, allowing hassle-free diagnostics and maintenance.
Quality of Service and Bandwidth Control
The DXS-1210 Series supports Auto Surveillance VLAN (ASV) and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN is a new, industry-leading technology that consolidates data and surveillance video transmission through a single DXS-1210 Series switch, thus sparing businesses the expense of dedicated hardware and facilities. ASV also ensures quality real-time video monitoring and control without compromising the transmission of conventional network data. Auto Voice VLAN technology enhances the VoIP service by automatically placing voice traffic from IP phones to a designated VLAN. With higher priority and an individual VLAN, these features guarantee the quality and security of VoIP traffic. The Differentiated Service Code Point (DSCP) markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with bandwidth control, network administrators can reserve bandwidth for important functions that require higher priority or more bandwidth.
Seamless Integration
The DXS-1210 Series comes with both RJ-45 and SFP+ ports capable of connecting to Cat. 6 and fiber for 10G Ethernet. The DXS-1210-10TS has 8 10GBASE-T ports and 2 SFP+ ports, the DXS-1210-12TC has an additional 2 10GBASE-T/SFP+ combo ports, while the DXS-1210-12SC has 10 10G SFP+ ports and 2 10GBASE-T/SFP+ combo ports. The DXS-1210-16TC also has 12 10GBASE-T ports, 2 SFP+ ports, and 2 10GBASE-T/SFP+ combo ports. This means the DXS-1210 Series can provide a flexible solution for upstream or downstream server connections, making network administration easy.
Versatile Management
The DXS-1210 Series comes with the D-Link Network Assistant (DNA) utility that
simplifies the configuration of devices that support the D-Link
DiscoveryProtocol. The D-Link Network Assistant utility easily allows
customers to discover multiple D-Link Smart Managed Switches within the same
L2 network segment and displays them on-screen for instant access. With this
utility, users do not need to change the IP address of their PC. This utility
further allows simultaneous configuration and basic setup of all discovered
devices, including password changes and firmware upgrades. The DXS-1210 Series
also supports D-View 7 and a full Command Line Interface (CLI) through the
console port and Telnet. D-View 7 is a network management system that allows
for the central management of critical network characteristics such as
availability, reliability, resilience, and security.
Secure your Network
D-Link’s innovative Safeguard Engine™ protects the switches against traffic
flooding caused by malicious attacks. The DXS-1210 Series supports 802.1Xport-
based and host-based authentication, allowing the network to be authenticated
through external RADIUS servers. The Access Control ListACL) the feature
enhances network security and helps to protect the internal network. The
DXS-1210 Series also features Address Resolution Protocol (ARP)spoofing
prevention, which protects from attacks on the network that may allow an
intruder to sniff data frames, modify traffic, or bring traffic to a halt
altogether by sending fake ARP messages. To prevent ARP spoofing attacks, the
switch uses packet control ACLs to block invalid packets that contain fakeARP
messages. For added security, the DHCP server screening feature filters DHCP
replies on unauthorized ports to prevent them from being assigned an IP
address.
Technical Specifications
General|
---|---
Model| •DXS-1210-10TS| •DXS-1210-12TC| •DXS-1210-12SC| •DXS-1210-16TC
Interfaces| •8 x 10GBASE-T ports
•2 x SFP+ ports| •8 x 10GBASE-T ports
•2 x SFP+ ports
•2 x 10GBASE-T/SFP+ combo
ports| •10 x 10G SFP+ ports
•2 x 10GBASE-T/SFP+ combo
ports| •12 x 10GBASE-T ports
•2 x SFP+ ports
•2 x 10GBASE-T/SFP+ combo
ports
Console Port| •121-45 console port
Port Standard & Functions| •IEEE 802.3u 100BASE-TX Fast Ethernet
•IEEE 802.3ab 1000BASE-T Gigabit Ethernet
•IEEE 802.3az compliance
•IEEE 802.3an 10GBASE-T 10 Gigabit Ethernet
•IEEE 802.3ae 10GbE over fiber
•IEEE 802.3z 1000BASE-X
•Auto MDI/MDIX support for 1000/10GBASE-T
Network Cables for 10GBASE-T| •Cat. 6 (30 m max)
•Cat. 6A or Cat. 7 (100 m max)
Media Interface Exchange| •Auto MDI/MDIX adjustment for all twisted-pair ports
Performance
Switching Capacity| •200 Gbps| •240 Gbps| • 240 Gbps
| •320Gbps
Maximum Packet Forwarding Rate| •148.8 Mpps| •178.56 Mpps| • 17856 Mpps
| •238.08 Mpps
Transmission Method| •Store-and-forward
MAC Address Table| •Up to 16,000 entries per device
Physical/Environmental
AC Input| •100 to 240VAC
Maximum Power Consumption| •6867W| – 90.81W| •43.81W| •90.81W
Standby Power Consumption| – 31.59 W| .42.65W| •25.22W| •43.65W
Operating Temperature| •-5 to SO’C (23 to 122 -F)
Storage Temperature| •-40 to 70 eC (-40 to 158-F)
Operating Humidity| •0% to 9596non-condensing
Storage Humidity| •0% to 95% non-condensing
Dimensions (L kW x H)| •440x 210x 44 mm(17.36x 8.26x 1.73 in)
Weight| – 3.10 kg (6.83 lbs)| •3.15 kg (694 lbs)| •2.73 kg (6.02 lbs)| I•3.15
kg (6.94 lbs)
Diagnostic LEDs| •Link/ActivityiSpeed (Per I OGBASE-T port)
•Link/Activity/Speed (Per 10G SFP+ port)
•Power
•Console
•Fan error
Certifications| •CE
•FCC
•C-Ticket
•VCCI
•BSMI
•CCC
Safety| •cUL
•CB
•CE
•CCC
•BSMI
Software
L2 Features|
- MAC Address Table
- Up to 16K entries
- Static MAC Addresses
- 1K
- IGMP Snooping
- IGMP v1/v2 Snooping
- IGMP v3 awareness
- Supports 384 IGMP groups
- Supports at least 128 static multicast addr
- Per VLAN IGMP Snooping
- Support host-based fast leave
- MLD Snooping
- MLD v1 Snooping
- MLD v2 awareness
- Support 384 groups
- Support 128 static multicast addresses
- Support host-based fast leave
- LLDP
|
- LLDP-MED
- Spanning Tree Protocol
- 802.1D STP
- 802.1w RSTP
- 802.1s MSTP
- Flow Control
- 802.3x Flow Control
- HOL Blocking Prevention
- Port Mirroring
- One-to-One
- Many-to-One
- Supports Mirroring for Tx/Rx/Both
- 802.3ad Link Aggregation:
- Maximum of 8 groups/8 ports per group
- Jumbo Frame
- Up to 9KB
- Loopback Detection
- ERPS (Ethernet Ring Protection Switching)
VLAN|
- 802.1Q VLAN
- Port-based VLAN
- 4K VLAN Groups
- Configurable VID
- 1~4094
|
- Voice VLAN
- Auto Surveillance VLAN
- GVRP 1
- Asymmetric VLAN
Quality of Service (QoS)|
- CoS based on
- 802.1p Priority Queues
- DSCP
- ToS
- IPv6 Traffic Class
- TCP/UDP port
- VLAN ID
- MAC Address
- Ether Type
- IP Address
- Protocol Type
- IPv6 Flow Label
|
- 802.1p Priority Queue
- 8 queues per port
- Queue Handling
- Strict
- Weighted Round Robin (WRR)
- Deficit Round Robin (DRR)
- Weighted Deficit Round Robin (WDRR)
- Strict + WDRR
- Bandwidth Control
- Port-based (Ingress/Egress, min. granularity 64 Kbps)
- iSCSI Awareness 1
L3 Features|
- IP Interface
- Supports 8 IPv4/v6 interfaces
- ARP
- 768 Static ARP
- Default Route
|
- IPv6 Neighbor Discovery (ND)
- Static Route
- Max. 64 IPv4 entries
- Max. 64 IPv6 entries
Access Control List (ACL)|
- Max. 50 access-list
- Max. 256 ACL rules
- Max. 50 VLAN access map 1
- ACL based on
- 802.1p priority
- VLAN 1
- MAC address
- Ether type
|
- IP address
- DSCP
- Protocol type
- TCP/UDP port number
- IPv6 Traffic Class
- IPv6 flow label
Security|
- Broadcast/Multicast/Unicast Storm Control
- D-Link Safeguard Engine
- DHCP Server Screening
- IP-MAC-Port Binding
- DHCP Snooping 1
- IP Source Guard 1
- Dynamic ARP Inspection 1
- IPv6 Snooping 1
- IPv6 Source Guard 1
- DHCPv6 Guard 1
- IPv6 ND Inspection 1
- IPv6 Router Advertisement (RA) Guard 1
|
- Traffic Segmentation
- SSH 1
- Support v1/ v2
- Support IPv4/ IPv6
- SSL
- Support v1/v2/v3
- Support IPv4/IPv6
- ARP Spoofing Prevention 1
- Max. 127 entries
- DoS Attack Prevention
- Port Security
- Supports up to 6656 MAC addresses per port
- Duplicate Address Detection
Operations, Administration, and Management (OAM)|
- Cable Diagnostics
Authentication, Authorization, and Accounting (AAA)|
- Web-based Access Control (WAC) 1
- Support local/RADIUS database
- Support Port-based access control
- Support Host-based access control
- Support Dynamic VLAN Assignment
- Identity-driven Policy (VLAN/ACL/QoS) Assignment
- 802.1X Authentication
- Support Dynamic VLAN Assignment
- Identity-driven Policy (VLAN/ACL/QoS) Assignment
- Supports local/RADIUS database
- Supports Port-based access control
- Supports Host-based access control
- Supports EAP, OTP, TLS, TTLS, PEAP
|
- Support IPv4/IPv6 RADIUS Server
- Support IPv4/IPv6 TACACS+ 1
- Guest VLAN
- Compound Authentication 1
- Authentication for management access
- Authentication Database Failover 1
- MAC-based Access Control (MAC) 1
- Support local/RADIUS database
- Support Port-based access control
- Support Host-based access control
- Support Dynamic VLAN Assignment
- Identity-driven Policy (VLAN/ACL/QoS) Assignment
Management|
- Web-based GUI
- D-Link Network Assistant Utility
- Full CLI
- Telnet Server
- TFTP Client
- Configurable MDI/MDIX
- SNMP
- Supports v1/v2c/v3
- SNMP Trap
- Smart Wizard
- LLDP
- LLDP-MED
- DHCP Relay 1
|
- System Log
- BootP/DHCP Client
- SNTP
- ICMP v6
- IPv4/v6 Dual Stack
- DHCP Auto-Configuration 1
- RMON v1/v2 1
- Trusted Host
- Dual Images
- Dual Configurations
- DNS Client 1
- Debug command
Green V3.0 Technology|
- Power Saving by:
- LED Shutoff
|
- System Hibernation
- Port Shutoff
MIB/RFC Standards|
- RFC 783 TFTP
- RFC 951 BootP/DHCP Client
- RFC 1157 SNMP v1, v2, v3
- RFC 1213 MIB-II
- RFC 1215 MIB Traps Convention
- RFC 1350 TFTP
- RFC 1493 Bridge MIB
- RFC 1769 SNTP
- RFC 1542 BootP/DHCP Client
- RFC 1901 SNMP v1, v2, v3
- RFC 1907 SNMP v2 MIB
- RFC 1908 SNMP v1, v2, v3
- RFC 2131 BootP/DHCP Client
- RFC 2138 RADIUS Authentication 1
- RFC 2139 RADIUS Authentication
- RFC 2233 Interface Group MIB
|
- RFC-2246 SSL
- RFC 2475
- RFC 2570 SNMP v1, v2, v3
- RFC 2575 SNMP v1, v2, v3
- RFC 2598 CoS
- RFC 2618 RADIUS Authentication 1
- RFC 2819 RMON v1
- RFC 2865 RADIUS Authentication
- RFC 3164 System Log
- RFC 3195 System Log
- RFC 3411-17 SNMP
- D-Link Private MIB
- LLDP MIB
- Zone Defense MIB
- 2233 Interface Group MIB
Order Information
Part Number| Description
DXS-1210-10TS| 8-port 10GBASE-T and 2-port SFP+
DXS-1210-12TC| 8-port 10GBASE-T, 2-port SFP+ and 2-port 10GBASE-T/SFP+ combo
design
DXS-1210-12SC| 10-port 10G SFP+ and 2-port 10GBASE-T/SFP+ combo design
DXS-1210-16TC| 12-port 10GBASE-T, 2-port SFP+ and 2-port 10GBASE-T/SFP+ combo
design
Optional 10 Gigabit Ethernet SFP+ Direct Attach Cables
DEM-CB100S| 10GbE SFP+ to SFP+ 1 m Direct Attach Cable
DEM-CB300S| 10GbE SFP+ to SFP+ 3 m Direct Attach Cable
DEM-CB700S| 10GbE SFP+ to SFP+ 7 m Direct Attach Cable
Optional Gigabit Ethernet SFP Transceivers
DGS-712| 1000BASE-T Copper SFP Transceiver
DEM-302S-LX| 1000BASE-LX Single-Mode, 2 km
DEM-310GT| 1000BASE-LX Single-Mode, 10 km
DEM-311GT| 1000BASE-SX Multi-mode, 550 m
DEM-312GT2| 1000BASE-SX Multi-mode, 2 km
DEM-314GT| 1000BASE-LHX Single-mode, 50 km
DEM-315GT| 1000BASE-ZX Single-mode, 80 km
DEM-302S-BXD| 1000BASE-BX-D Single-Mode, 2 km (TX-1550/RX-1310 nm)
DEM-302S-BXU| 1000BASE-BX-U Single-Mode, 2 km (TX-1310/RX-1550 nm)
DEM-330T| 1000BASE-BX-D Single-Mode, 10 km (TX-1550/RX-1310 nm)
DEM-330R| 1000BASE-BX-U Single-Mode, 10 km (TX-1310/RX-1550 nm)
DEM-331T| 1000BASE-BX-D Single-Mode, 40 km (TX-1550/RX-1310 nm)
DEM-331R| 1000BASE-BX-U Single-Mode, 40 km (TX-1310/RX-1550 nm)
Optional 10 Gigabit Ethernet SFP+ Transceivers
DEM-431XT| 10GBASE-SR Multi-Mode, OM1: 33 m/OM2: 82 m/OM3: 300 m (w/o DDM)
DEM-431XT-DD| 10GBASE-SR Multi-Mode, OM1: 33 m/OM2: 82 m/OM3: 300 m (with DDM)
DEM-432XT| 10GBASE-LR Single-Mode, 10 km (w/o DDM)
DEM-432XT-DD| 10GBASE-LR Single-Mode, 10 km (with DDM)
DEM-433XT| 10GBASE-ER Single-Mode, 40 km (w/o DDM)
DEM-433XT-DD| 10GBASE-ER Single-Mode, 40 km (with DDM)
DEM-434XT| 10GBASE-ZR Single-Mode, 80 km (w/o DDM)
DEM-436XT-BXD| 10GBASE-LR Single-Mode, 20 km (TX-1330/RX-1270 nm) (w/o DDM)
DEM-436XT-BXU| 10GBASE-LR Single Mode, 20 km (TX-1270/RX-1310 nm) (w/o DDM)
Optional 10 Gigabit Ethernet Adapters
DXE-810S| Single port 10G SFP+ PCI-Express Adapter
DXE-810T| Single port 10GBASE-T RJ45 PCI-Express Adapter
DXE-820T| Dual-port 10GBASE-T RJ45 PCI-Express Adapter
Optional Management Software
DV-700-N25-LIC| D-View 7 – 25 Node License
DV-700-N50-LIC| D-View 7 – 50 Node License
DV-700-N100-LIC| D-View 7 – 100 Node License
DV-700-N250-LIC| D-View 7 – 250 Node License
DV-700-N500-LIC| D-View 7 – 500 Node License
DV-700-N1000-LIC| D-View 7 – 1000 Node License
DV-700-P5-LIC| D-View 7 – 5 Probe License
DV-700-P10-LIC| D-View 7 – 10 Probe License
DV-700-P25-LIC| D-View 7 – 25 Probe License
DV-700-P50-LIC| D-View 7 – 50 Probe License
DV-700-P100-LIC| D-View 7 – 100 Probe License
This feature will be supported in a future firmware release
Updated 2017/07/28
Specifications are subject to change without notice. D-Link is a registered
trademark of D-Link Corporation and its overseas subsidiaries. All other
trademarks belong to their respective owners.
©2017 D-Link Corporation. All rights reserved. E&OE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>