Pedestal Hopper TV-Stand Installation Guide
- October 30, 2023
- Pedestal
Table of Contents
Hopper
Assembly
Guide
Hopper TV-Stand
Hopper
Congratulations on your new Pedestal product.
We welcome you on our journey towards creating flexible interior design
solutions for tv-screens.
Back in the day, televisions were design objects – beautifully made, and put
on display. But somewhere along the line, we began to care less about how they
look. Most of us have a big screen at home. Personally, we love them. We
watch, zap, and binge with a single click. But making them look good? Now,
that’s a challenge. Mounts, pods, links, stands, call them what you want.
Those things that hold your screen can really ruin your feng shui. Setting up
your screen at home can feel like choosing between a living room — or a
screening room. So, we founded Pedestal.
We’re a small team of people who design furniture that hold screens, inspired
by 20th century industrial aesthetics. They should look good and work just
right. That’s it.
Tools
You will need the tools listed below:
- Wrench (Provided in the hardware bag)
- Hex keys (Provided in the hardware bag)
- Table
- Soft cloth or blanket
- Assisting friend
Mount cross bar
Task
Mount the crossbar between the legs as shown.
Parts
4 x M6x40 bolts
4 x M6 Washer
Mount brackets
Task
Mount the brackets horizontally onto both sides as shown.
Tighten all connections.
Parts
8 x M8x50mm bolts
8 x M8 Nuts
Mount brackets detail
Task
Detailed view of step 2.0.
Mount TV brackets
Task
Place your screen facing backside up on a tabletop with a soft cloth or
blanket between the two in order to protect both.
Mount the TV brackets vertically using the fitting holes.
For correct fit, see step 3.1
Parts
4 x suitably sized bolts
4 x M6/M8 washers
At least 4 x suitably sized spacers
3.1 TV brackets fitting
Do not panic!
You will not need all of the remaining hardware.
The large selection of remaining hardware is to accommodate as many different
screens as possible.
For a correct fit you will have to identify the right combination of provided
spacers, washers and bolts.
Place the spacers between the screen and the brackets to ensure that the
brackets do not touch the screen.
If for instance your screen has a curved backside, you might have to use more
than one layer of spacers.
Now screw the appropriately dimensioned bolts with washers through the
brackets and spacers into the threaded holes on the backside of the screen.
Tighten the bolts until you have a snug fit. Be sure not to overtighten. The
bolts must not reach the bottom of the threaded holes. Overtightening might
cause damage to your screen.
Mount TV
Task
Hang TV on stand
Mount safety hooks
Task
Secure the TV to the stand with the safety hooks as shown.
Tighten all connections.
Parts
2 x M5x8mm Bolts
All done
Screen steady
Popcorn ready
www.pdstl.com http://pdstl.com/pages/manuals
Use the QR code or type in the URL to access our video guides.
www.pdstl.com/pages/manuals
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>