NICOR TGL114UXX TGL LED Troffer User Guide
- June 16, 2024
- NICOR
Table of Contents
NICOR TGL114UXX TGL LED Troffer
DO NOT INSTALL DAMAGED PRODUCT
To reduce the risk of death, personal injury or property, damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards read all
warnings and instructions included with and on the fixture box and all fixture
labels.
Commercial installation, service and maintenance of luminaires should be
performed by a qualified licensed electrician.
WARNING: RISK OF ELECTRIC SHOCK
- Turn off the electrical power at fuse or circuit breaker box before wiring fixture to power supply.
- Turn off the power when you perform any maintenance.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
- Make all electrical and grounded connections in accordance with the National Electric Code and any applicable local code requirements.
- All wiring connections should be capped with UL approved wire connectors.
CAUTION: RISK OF INJURY
- Wear gloves and safety glasses at all times when removing luminaire from cartons, installing, servicing or performing maintenance.
- Avoid direct eye exposure to the light source while it is on.
- Account for small parts and destroy packaging material, as these may be hazardous to children.
- Ensure fixtures are properly secured to T-bar grid and/or ceiling using wire or aircraft cable capable of supporting 100 lbs minimum.
CAUTION: RISK OF FIRE
- Keep combustible and other materials that can burn away from luminaire and lamp/lens.
- MIN 90°C SUPPLY CONDUCTORS
Dimensions
Specifications and dimensions subject to change without notice.
Customer Support
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 877 07 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com December 16,202 7 5:04 PM rev 7 .0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>